Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results
summary
The gist
The doubly-polarized production of W±Z pairs at the Large Hadron Collider (LHC) is presented at next-to-leading order (NLO) accuracy both for the electroweak (EW) and QCD corrections…
This episode discusses
- Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results · Paper Radio
- Search for new phenomena in three- or four-lepton events in pp collisions at sqrt s = 13 TeV with the ATLAS detector
- Measurements of differential cross-sections in four-lepton events in 13 TeV proton-proton collisions with the ATLAS detector
- Measurement of the inclusive and differential WZ production cross sections, polarization angles, and triple gauge couplings in pp collisions at sqrt s = 13 TeV
- Vector-boson pair production at the LHC to O(alpha 3) accuracy
- Massive gauge boson pair production at the LHC: a next-to-leading order story
- Next-to-leading-order electroweak corrections to the production of three charged leptons plus missing energy at the LHC
- The two-loop helicity amplitudes for q q' to V 1 V 2 to 4 leptons
- W plus or minusZ production at hadron colliders in NNLO QCD
- W plus or minus Z production at the LHC: fiducial cross sections and distributions in NNLO QCD
- NNLO QCD+NLO EW with MATRIX+OpenLoops: precise predictions for vector-boson pair production
- W+W-, WZ and ZZ production in the POWHEG BOX
- W+W-, WZ and ZZ production in the POWHEG BOX V2
- NLO QCD+NLO EW corrections to diboson production matched to parton shower
- Anomalous triple-gauge-boson interactions in vector-boson pair production with RECOLA2
- QCD Corrections in SMEFT Fits to WZ and WW Production
- Validity of SMEFT studies of VH and VV Production at NLO
- Vector boson pair production at the LHC
- VBFNLO: A parton level Monte Carlo for processes with electroweak bosons
- NNLO QCD study of polarised W+ W- production at the LHC
- Measurement of W plus or minusZ production cross sections and gauge boson polarisation in pp collisions at sqrt s = 13 TeV with the ATLAS detector
The paper
Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results · Read on arXiv
Duc Ninh Le, Julien Baglio, Thi Nhung Daoa
Faculty of Fundamental Sciences, PHENIKAA University · CERN
The doubly-polarized production of W plus or minus Z pairs at the Large Hadron Collider (LHC) is presented at next-to-leading order (NLO) accuracy both for the electroweak (EW) and QCD corrections, including a detailed description of the calculational method using the double-pole approximation. Numerical results at the 13 TeV LHC are presented in particular for the W- Z case in the e- ν e μ+μ- channel using ATLAS fiducial cuts and for polarized distributions defined in the WZ center-of-mass system. The NLO EW corrections relative to the NLO QCD predictions are found to be smaller than 5% in most kinematic distributions, but can reach the level of 10% in some distributions such as lepton transverse momentum distributions or rapidity separation between the electron and the Z boson. EW corrections are not uniform for different polarizations. A comparison between the new ATLAS measurement of polarization fractions to our theoretical prediction is presented.
DOI: 10.1140/epjc/s10052-022-11032-2
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Doubly-polarized WZ hadronic production at NLO QCD+EW".
Mira: Here's the gist of the paper. The doubly-polarized production of W±Z pairs at the Large Hadron Collider (LHC) is presented at next-to-leading order (NLO) accuracy both for the electroweak (EW) and QCD corrections, including a detailed description of the calculational method using the double-pole approximation.
Kai: Numerical results at the 13 TeV LHC are presented in particular for the W−Z case in the e−ν¯eµ+µ− channel using ATLAS fiducial cuts and for polarized distributions defined in the W Z center-of-mass system.
Mira: Theoretical Framework and Methodology The study employs the double-pole approximation (DPA) to define polarization observables, which are termed fiducial polarizations, directly from lepton angular distributions.
Kai: The DPA allows for the separation of the gauge-boson polarizations at the amplitude level by neglecting contributions from W → 4 and very off-shell W Z contributions because they are strongly suppressed by kinematic cuts.
Paper summary: Kai: So we're talking about this paper today, "Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results." This work tackles how you can measure the polarization of these W and Z bosons when they are produced together at the Large Hadron Collider.
Mira: Exactly. The main idea here is to look at the doubly-polarized production of W plus Z pairs, calculating it up to next-to-leading order accuracy for both the QCD and electroweak corrections. It’s about setting up a solid theoretical framework for these measurements using something called the double-pole approximation.
Lev: From my side, that means they're using this double-pole approximation to define what we call fiducial polarizations directly from the angular distributions of leptons. This lets them separate the gauge boson polarizations at the amplitude level by cutting out contributions from things like W to four or very off-shell W Z interactions because those are strongly suppressed by kinematic cuts.
Kai: It sounds complicated, but what they're doing is defining four main doubly-polarized cross sections: longitudinal-longitudinal, transverse-transverse, longitudinal-transverse, and transverse-longitudinal. These are the observables we can actually measure in the detector.
Mira: Right. They then look at the numerical results specifically at thirteen TeV LHC for the W minus Z case in a specific channel, e minus nu plus mu minus <ref:2208.09232#pg1>. They are using ATLAS fiducial cuts for this measurement and looking at polarized distributions defined in the W Z center-of-mass system.
Lev: And they report that they've calculated integrated doubly-polarized cross sections along with seven point scale uncertainties. The comparison against the new ATLAS measurement shows very good agreement, within one point five standard deviations, which is pretty tight for a calculation at this level.
Kai: So, to summarize what we just covered about this paper "Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results": it’s about calculating the doubly-polarized production of W plus Z pairs at next-to-leading order accuracy for both the electroweak and QCD corrections, using a double-pole approximation to define fiducial polarizations, and they found very good agreement between their NLO QCD plus EW predictions at thirteen TeV LHC with new ATLAS measurements <ref:2208.09232#pg1,hadronic production at NLO QCD+EW: Calculation method and further results>.
Mira: It matters because it provides a detailed description of how these polarized cross sections behave in specific kinematic distributions, showing that while EW corrections are small for integrated quantities, they can be significant for things like lepton transverse momentum distributions or the rapidity separation between the electron and the Z boson.
Lev: For me, what's important is that even if integrated cross sections agree well within one point five standard deviations, the paper points out that there are still some areas where corrections are reaching about ten percent in specific distributions like those transverse momenta or rapidity separations.
Kai: That means we can't just look at the total count; we need to examine how the polarization changes when you look at different parts of the final state, like those specific kinematic variables mentioned.
Mira: And they also point out some changes in the fractions themselves, for instance, how much longitudinal-longitudinal and transverse-transverse fractions are reduced to six percent and sixty-two percent respectively, while the longitudinal-transverse and transverse-longitudinal increase to sixteen percent each.
Lev: The discrepancy between their NLO QCD plus EW polarization fractions and the ATLAS results is quantified by a pull defined as fth minus fexp over sigma, which is less than zero point five standard deviations for both processes, but they flag the W minus L ZT and W minus T ZL fractions where the magnitude of those pulls is about one point three for both cases.
Kai: So, looking at the title "Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results," it tells us this paper is a deep dive into precision measurements, not just a quick overview. It’s about showing how much detail you need to get accurate polarization data from these di-boson productions.
Mira: And the implications are that for future searches at the LHC, understanding these specific kinematic regions where the corrections are larger is important because that's where you'll find potential new physics signals.
Lev: From an engineering point of view, this work sets a benchmark; it shows what level of theoretical precision we need to aim for if we want to interpret the ATLAS data with that kind of confidence.
Kai: So, we’ve covered the summary and the conclusion about this paper "Doubly-polarized WZ hadronic production at NLO QCD+EW: Calculation method and further results." We've talked about what it claims and why it matters for understanding these complex processes.
Conclusion: Kai: So we've looked at how they calculated the doubly polarized production of W plus Z pairs at next-to-leading order accuracy for both QCD and electroweak corrections.
Mira: Right, so this paper lays out a method using the double pole approximation to define these fiducial polarizations directly from the lepton angles. It’s about separating those gauge boson polarizations by cutting out very off shell interactions because those are heavily suppressed by the kinematic cuts we use in experiments.
Lev: From my side, it’s interesting how they handled the NLO corrections, splitting them into production and decay parts for the electroweak section, which is a necessary step when you're trying to get precision numbers.
Kai: They then compare their numerical results at thirteen tera electron volt collider with new measurements from ATLAS using fiducial cuts. And generally, they show very good agreement within one point five standard deviations for the integrated cross sections.
Mira: But that agreement isn't perfect everywhere; they show that while the total integrated quantities look good, the EW corrections can become significant when you look at specific things like transverse momentum distributions or rapidity separations between those leptons.
Lev: That means if we were building hardware to measure this, we’d need to be really careful about what kind of distributions we're measuring because some of these corrections are bigger than others.
Kai: So the authors conclude that the longitudinal-longitudinal and transverse-transverse fractions are reduced to around six percent and sixty-two percent respectively, while the longitudinal-transverse and transverse-longitudinal increase to sixteen percent each.
Mira: That shift in those fractions tells us something about how the underlying dynamics of W Z production are changing at high energy scales.
Lev: The paper flags a pull defined as the difference between their theory and experimental polarization fractions that is less than zero point five standard deviations for both processes, which is solid for a calculation this complex.
Kai: However, they highlight that the largest deviations come from the longitudinal-transverse and transverse-longitudinal fractions where those pulls are about one point three standard deviations.
Mira: So what this means for us is that we still have some uncertainty in how we interpret these specific polarization observables at this precision level.
Lev: We definitely need more work both from the theory side to pin down those larger discrepancies and from the experimental side to get better data on those tricky kinematic regions.
Kai: This paper sets a benchmark for what precision looks like in di-boson production, but it also clearly shows where the next steps in both theory and experiment need to focus.
More episodes
- 2610.38463-Gauge-parameter cancellation and finite form factors in one-loop quark scattering in the refined Gribov-Zwanziger framework
- 2610.37198-Searches for new particle physics by methods of classical and neutrino astronomy
- 2511.15779-SURFing to the Fundamental Limit of Jet Tagging
- 2505.01492-Photo- and Hadrodisintegration constraints on massive relics decaying into neutrinos
- 2505.20389-Dispersion relation of the neutrino plasma: Unifying fast, slow, and collisional instabilities
- 2511.10731-Keeping It Renormalizable: Minimal Baryogenesis induced Asymmetric Dark Matter
- 2404.04021-Vacuum correlations of the stress-energy-momentum tensor with constituent quarks
- 2503.02931-Relativistic Navier-Stokes description of the quark-gluon plasma radial flow
- 2606.06105-Bulk viscosity of a binary mixture: the role of the intra-species interaction
- 2607.03343-First look at the evaluation of two-loop Feynman integrals for radiative return processes