b to Form Factors from Light-Cone Sum Rules with-Baryon Distribution Amplitudes

summary

The gist

We compute the Λb → Λ transition form factors using light-cone sum rules based on Λ-baryon distribution amplitudes The resulting form factors enable a controlled phenomenological application to…

In short

The study computes $\Lambda_b \rightarrow \Lambda$ transition form factors using light-cone sum rules based on $\Lambda$-baryon distribution amplitudes (DAs). The analysis systematically examines pseudoscalar, vector, and axial-vector currents and compares different interpolating currents. It concludes that the pseudoscalar current yields the most numerically stable and phenomenologically viable form factors for rare $\Lambda_b$ decays.

Key concepts

Light-Cone Sum Rules (LCSR)
This is a theoretical method used to calculate particle properties by relating them to non-perturbative QCD effects. It uses correlation functions defined on the light cone, which allows physicists to bridge the gap between short-distance perturbative calculations and long-distance hadronic physics.
Baryon Distribution Amplitudes (DAs)
These are specific mathematical functions that describe how the momentum and spin of quarks are distributed inside a baryon like $\Lambda_b$. The paper includes these DAs up to twist-6, providing detailed input for the LCSR calculations.
Interpolating Current
This is a mathematical operator used in the sum rule to couple to the physical baryon ($\Lambda_b$). Different choices of this current affect how excited states contribute and ultimately determine the resulting form factors. The analysis tested various currents to find the most reliable one.
Pseudoscalar Interpolating Current
This specific choice of current was found to be superior because it produced form factors with stable Borel behavior and satisfied expected constraints from heavy-quark symmetry (HQET) at leading order, making it the most reliable for this calculation.

Terminology used across episodes

This episode discusses

The paper

b to Form Factors from Light-Cone Sum Rules with-Baryon Distribution Amplitudes · Read on arXiv

F. Mahmoudi, D. Mishra

Université Claude Bernard Lyon 1 · CERN · Institut Universitaire de France

DOI: 10.1103/4y46-ldjv

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "b to Form Factors from Light-Cone Sum Rules with-Baryon Distribution Amplitudes".

Mira: Here's the gist of the paper. We compute the Λb → Λ transition form factors using light-cone sum rules based on Λ-baryon distribution amplitudes The resulting form factors enable a controlled phenomenological application to rare Λb decays The analysis computes the Λb → Λ transition form factors using light-cone sum rules based on Λ-baryon distribution amplitudes The analysis is performed for pseudoscalar, vector, and axial-vector b → s currents and for different choices of the Λb interpolating current The dominant hadronic uncertainties in exclusive b → sl+l− decays arise from the form factors In this work, we revisit the determination of the Λb → Λ transition form factors using LCSRs based on Λ baryon DAs We include systematically all three-quark Λ DAs up to twist–6 and consider pseudoscalar, vector, and axial-vector b → s transition currents A central aspect of our analysis is a detailed comparison of different interpolating currents for the Λb baryon We find that only the pseudoscalar interpolating current leads to numerically stable and phenomenologically viable form factors Interpolating Current Stability Analysis The analysis compares different interpolating currents for the Λb baryon We explicitly include the contribution of the negative-parity Λ∗b state in the hadronic representation We find that, while formally consistent sum rules can be derived for all interpolating currents considered, their numerical behaviour is different In particular, the pseudoscalar interpolating current leads to form factors that exhibit stable Borel behaviour and satisfy the expected equation-of-motion (EOM) relations and heavy-quark symmetry constraints at leading order Based on this analysis, we identify the pseudoscalar current as providing the most reliable determination of the Λb → Λ form factors in LCSR at leading order Theoretical Framework and Representation The starting point of the light-cone sum-rule analysis of the Λb → Λ transition form factors is the following vacuum-to-Λ correlation function The weak transition currents are chosen as: ji(x) = ¯s(x) Γi b(x), (2) with1 Γi ∈ mb iγ5, γµ, γµγ5.

Kai: (3) A central ingredient of the LCSR construction is the choice of the interpolating current for Λb baryon, since it governs the coupling to the physical ground state and the pattern of the contributions from excited states The pole contribution of the Λb ground state to the hadronic representations determined by two matrix elements For example, for a pseudoscalar weak transition current, the hadronic matrix element is parameterised in terms of a single form factor as: ⟨Λ(p)mb s iγ ¯ 5 bΛb(p − q)⟩ = (mΛb + mΛ) G(q2) ¯uΛ(p)iγ5 uΛb(p − q), (7) Phenomenological Application and Results The resulting form factors are transformed into the helicity basis and parametrised using a truncated z-expansion, allowing for a controlled extrapolation in q2 and a comparison with lattice-QCD results In Figure 2, we present the numerical results for the helicity form factors obtained from lightcone sum rules using the pseudoscalar interpolating current The solid lines denote the median values, while the shaded bands represent the total LCSR uncertainties In order to extrapolate the light-cone sum-rule results beyond the low-q2 region and to facilitate phenomenological applications, we parametrise the helicity form factors F ∈

f+, g+, f⊥, g⊥: using a truncated z-expansion The resulting prediction for dB/dq2 is shown in Fig 5 Compared to the theory prediction of the Λb → Λl+l− branching ratio based on lattice-QCD form factors as implemented in SuperIso

58–60: are sightly larger In conclusion, we have demonstrated that LCSRs based on Λ-baryon DAs provide a consistent framework for computing Λb → Λ form factors at low momentum transfer A key outcome of our analysis is the identification of the pseudoscalar Λb interpolating current as yielding numerically stable sum rules that satisfy the expected EOM relations and constraints from HQET, once the nearby Λ∗b contribution is properly accounted for The resulting form factors enable a controlled phenomenological application to rare Λb decays Our results can be systematically improved by incorporating radiative corrections, tensor operators, and refined inputs for the Λ DAs, and they provide a solid foundation for future studies of rare Λb decays and their sensitivity to physics beyond the Standard Model References

1: T.

Mira: Hurth, F.

Kai: Mahmoudi, Y.

Paper summary: Kai: So to wrap up this paper "b to Form Factors from Light-Cone Sum Rules with-Baryon Distribution Amplitudes", the central finding is that light-cone sum rules based on lambda baryon distribution amplitudes offer a consistent framework for computing these transition form factors at low momentum transfer.

Mira: The most important outcome they highlight is the identification of the pseudoscalar lambda b interpolating current as providing numerically stable sum rules that satisfy the expected equation of motion relations and constraints from heavy quark symmetry once you account for those nearby lambda star b contributions.

Lev: It’s a solid foundation because it gives us a reliable way to get those form factors that we can then use for phenomenological applications in rare b decays.

Kai: So, what's the bigger picture here? What does this work mean when you look at how it connects to the experimental landscape and physics beyond the Standard Model?

Mira: It means these results enable a controlled application to rare lambda b decays, providing a systematic way to test the flavour sector.

Lev: The limitation they state is that their method relies on those distribution amplitudes, so if those inputs aren't perfect, the final form factors have corresponding uncertainties.

Kai: So in simple terms, this paper gives us a reliable calculation of how these specific b to lambda decays happen at low momentum transfer using sum rules.

Mira: And it points towards a clear direction for future work by suggesting that adding more corrections will help refine these predictions further.

Conclusion: Kai: So, we’ve been digging into how they tackled these b to lambda transition form factors using light-cone sum rules based on lambda baryon distribution amplitudes, and now we’re wrapping up with what this whole thing actually means for us.

Mira: Right, so the main point is that they found a consistent way to get these form factors at low momentum transfer by systematically looking at the three-quark distribution amplitudes up to twist six.

Lev: From an error correction standpoint, it’s interesting because they focused on the pseudoscalar interpolating current and said that it gave them numerically stable results that actually followed heavy quark symmetry constraints, which is what we need for any real hardware setup.

Kai: So if we translate this back to what a listener just needs to know, these calculation methods give us a solid way to predict how these rare decays happen without getting lost in the mess of the low momentum transfer region.

Mira: Exactly. It’s about moving from just knowing the decay happens to actually having a calculated number for that branching ratio that you can compare against things like lattice QCD results or experimental measurements.

Lev: But we have to remember, their method stops where the distribution amplitudes come in; if those inputs aren't perfect, our calculated form factors won't be perfect either.

Kai: So the conclusion here is that they’ve built a reliable tool for these calculations, and now we can start using it to look at rare lambda b decays with more confidence.

Mira: And this opens up the door for future work, like adding radiative corrections or looking at different types of tensor operators to improve those predictions further.

Lev: That makes sense; refining the inputs is how you eventually get closer to a definitive answer that can tell us if we see any new physics in these decays.

More episodes

← Home