Radiative decays of the h c meson from lattice QCD

summary

The gist

Radiative decays of the hc meson from lattice QCD explore transitions to γη and γη′ states to investigate discrepancies with experimental results <ref:2607.25707#pg2>.

In short

This lattice QCD study investigates radiative decays of charmonium states, specifically hc to gamma eta and gamma eta prime. By using advanced techniques to access hc as an excited state and separating electric dipole and longitudinal form factors, the research provides estimates for these transition rates. The results suggest that discrepancies with experimental data might stem from the specific properties of the eta and eta prime mesons on this lattice.

Key concepts

Electric Dipole (E1) Form-Factor
This is a mathematical description used to characterize how the charmonium state decays into a photon and a light meson. It represents one type of transition, similar to an electric dipole moment in quantum mechanics, and its Q² dependence describes how this strength changes as the momentum transfer squared varies.
Longitudinal (C1) Form-Factor
This form factor describes the second type of transition component, often called longitudinal. It is crucial for fully describing the decay process by accounting for all possible polarization states of the decaying particle and providing a complete picture of the transition matrix element.
Three-Point Correlation Functions
These are specific mathematical tools used in lattice QCD to calculate decay processes involving three particles (like an initial state, a final photon, and a light meson). Simultaneous fitting of their time dependencies helps reliably extract the properties of the decaying particle, hc.
Q² Dependence
Q² is a variable representing the momentum transfer squared in the decay process. Determining how form factors like E1(Q²) change with Q² allows researchers to map out the full range of physical information contained within these transitions.

Terminology used across episodes

This episode discusses

The paper

Radiative decays of the h c meson from lattice QCD · Read on arXiv

Adelaide University · College of William and Mary · Thomas Jefferson National Accelerator Facility

We explore, for the first time in lattice QCD, the radiative decays to γη and γη' of the J PC=1+- charmonium state, h c. This work expands upon a previous calculation of J/ψ decays to the same final states, incorporating novel technology to access the h c where it is an excited state and to separate the independent electric dipole and longitudinal form--factors. Results for the radiative decay rates, computed on three-flavor lattices with m π about 391 MeV show a suppression relative to experiment that is similar to that observed in the prior calculation of J/ψ to γη. The timelike Q squared dependence of both form--factors together influence the Dalitz decays, h c to+- η, which are as yet unmeasured experimentally.

DOI: 10.1103/3s33-c5n5

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Radiative decays of the h c meson from lattice QCD".

Mira: Here's the gist of the paper. Radiative decays of the hc meson from lattice QCD explore transitions to γη and γη′ states to investigate discrepancies with experimental results <ref:2607.25707#pg2>.

Kai: The work explores, for the first time in lattice QCD, the radiative decays to γη and γη′ of the J P C = 1+− charmonium state, hc <ref:2607.25707#pg2>.

Mira: The study builds upon previous calculations of J/ψ decays to these final states by incorporating novel technology to access hc as an excited state and separate independent electric dipole and longitudinal form–factors <ref:2607.25707#pg2>.

Kai: The specific decays to the lightest isoscalar pseudoscalars, hc → γη and hc → γη′, have been measured with good statistical precision at BES III <ref:2607.25707#pg2>.

Title and authors: Kai: So summarizing this paper, they are doing a world first lattice QCD calculation of multipole transition form factors for hc to gamma eta and gamma eta prime evaluated on the same m pi equal three hundred ninety one MeV lattices used in references three and four.

Mira: They are using optimized operators following from diagonalization of a matrix of two point correlation functions to access hc as an excited state and separate the electric dipole and longitudinal form factors.

Lev: And they introduce a procedure for simultaneous fitting of the time dependencies of multiple three point correlation functions to get a single value for J on page two of that work <ref:2607.25707#pg1>.

Kai: This allows them to extract values for the invariant form factors, E one Q two and C one Q two, which represent multipoles of electric dipole and longitudinal nature respectively.

Mira: The total width for the Dalitz decays follows from integrating over Q two from two m L squared to m hc minus m eta prime squared on page two of that work <ref:2607.25707#pg1>.

Lev: So they are setting up the calculation to determine the Q two dependence of these form factors, which is necessary for that integration.

Kai: The procedure leads to a set of values of E one Q two and C one Q two discretely sampled in Q two for both hc to gamma eta and hc to gamma eta prime on page two of that work <ref:2607.25707#pg1>.

Mira: And the radiative decay rates for hc to gamma eta and hc to gamma eta prime are controlled by E one zero, as presented in equation two on page two of that work <ref:2607.25707#pg1>.

Lev: So E one zero is the value they are using to characterize these decay rates, which is a single number derived from the form factor values.

Kai: The best estimates for this zero Q two form factor are found to be ehc to c gamma eta prime zero is equal to zero point zero five five six with a three zero error in giga-electron volts on page two of that work <ref:2607.25707#pg1>.

Mira: That specific number, ehc to c gamma eta prime zero is equal to zero point oh five five six with a three zero error in giga-electron volts on page two of that work, is the central finding for the form factor at zero Q two <ref:2607.25707#pg2>.

Lev: It's a concrete number we can compare against experimental data, but I’m wondering how much systematic uncertainty is baked into those estimates before we even look at the Q two dependence.

Kai: They do provide those values discretely sampled in Q two for both hc to gamma eta and hc to gamma eta prime on page two of that work <ref:2607.25707#pg1>.

Mira: And they also have these values for the decay rates controlled by E one zero, as presented in equation two on page two of that work <ref:2607.25707#pg1>.

Lev: So we need to understand how those discrete points map onto a continuous dependence so we can actually talk about the Q two dependence properly.

Kai: The procedure for simultaneous fitting of time dependencies is what allows them to do that, which is what they are doing on page two of that work <ref:2607.25707#pg1>.

Mira: That technique is essentially how they handle the complexity of the three point correlation functions to get a single value for J on page two of that work <ref:2607.25707#pg1>.

Lev: It’s a way to control the noise or systematic effects from those different time slices by ensuring the fit parameters, like J and delta t, are common across all time steps.

Mira: And this is a bit of a simplification because it means they only have to deal with a single form factor for the psi prime decays, which makes the analysis simpler in that specific case.

The paper's summary: Kai: Now let’s look at the improvements they suggest for this work. They use optimized operator technology to access the first excited vector state, which is psi prime on page three of that work <ref:2607.25707#pg1>.

Mira: That means they simplify things by only having to deal with a single form factor for those psi prime decays, which makes the analysis simpler in that specific case.

Lev: That simplification is useful if you are trying to get a baseline result quickly, but it might hide complexity if the physical process actually involves interference between different states.

Kai: The paper also introduces the procedure for simultaneous fitting of time dependencies of multiple three point correlation functions to get a single value of J on page two of that work <ref:2607.25707#pg1>.

Lev: This seems like a useful technique for controlling the noise or systematic effects from those different time slices by ensuring the fit parameters, like J and delta t, are common across all time steps.

Kai: The paper also uses various parameterizations, including dipole and exponential forms as well as a conformal mapping into a variable z of Q two on page two of that work <ref:2607.25707#pg1>.

Mira: That allows for comprehensive characterization of the Q two range explored in the calculation, so they aren't stuck with just one mathematical shape.

Lev: A conformal mapping is powerful because it can sometimes map a complex region onto a simpler one, but we need to be careful that we don't introduce artifacts in our parameterization.

Kai: And they compare their real photon transition rates by comparing estimates from various parameterizations of the Q two dependence of E one Q two with values extracted from BESIII experimental decay widths on page two of that work <ref:2607.25707#pg1>.

Mira: That comparison is a way to cross-validation method to assess the accuracy of lattice QCD results against what we see experimentally at BESIII.

Lev: Cross-validation is always a good thing, but we have to remember that the experimental data itself has its own uncertainties, and they need to be comparable on both sides.

Kai: They conclude that relevant signals with a high degree of statistical precision can be obtained by use of contemporary techniques on page one of that work <ref:2607.25707#pg1>.

Mira: So they are saying these new techniques give us a way to get results with good statistical precision using contemporary methods.

Lev: That’s the goal, but I wonder if the practical overhead for achieving that high precision is too much for current real hardware setups.

The paper's improvements: Kai: So to wrap up on "Radiative decays of the h c meson from lattice QCD," they find that their most likely origin of the observed discrepancy with respect to experiment common to both J psi decaying and hc decaying is some property of the eta and eta prime on this particular lattice on page one of that work <ref:2607.25707#pg1>.

Mira: That means the issue isn't in how we model charmonium decays generally, but perhaps in how those specific light mesons behave on this particular lattice setup.

Lev: So they are pointing toward something specific to the gauge field configurations used in this calculation rather than a general failure of the theory itself.

Lev: I think the next step they suggest, considering multi-hadron production like J psi decaying to gamma pi pi and coupled channel J psi decaying to gamma kappa kappa on page one of that work, would be a good way to test if this effect holds up <ref:2607.25707#pg1>.

Lev: And I think that's a solid plan because if we can't get a clean signal here, we need better tools for sampling different parts of the configuration space on other lattices.

Conclusion: Kai: So we’re wrapping up this look at "Radiative decays of the h c meson from lattice QCD." Basically, they used optimized operators to access that hc state as an excited state and they successfully separated the electric dipole and longitudinal form factors for those decays to gamma eta and gamma eta prime.

Mira: Right, so we’re talking about characterizing those decay rates using a covariant vector current matrix element decomposition, which gives them those invariant form factors, E one Q two and C one Q two.

Lev: And they used that simultaneous fitting of multiple three point correlation functions to get a single value for J. That’s the mechanism they used to control the noise from those different time slices.

Kai: They found some concrete numbers for these form factors at zero momentum, E one zero and C one zero, and those estimates are around zero point zero five five six in giga-electron volts.

Mira: Those are important because they’re the inputs you need to calculate the total width for the Dalitz decays by integrating over that Q two range.

Lev: But we have to remember they also found that across the entire Q two range, their signal is broadly compatible with zero, which suggests a certain level of consistency.

Kai: The conclusion is that whatever discrepancy we see with experimental results from BESIII for both J psi decaying and hc decaying might actually be due to some property specific to the eta and eta prime mesons on this particular lattice.

Mira: They also compared their computed ratio, Ehc to c gamma eta prime zero over Ehc to c gamma eta zero, which is about two point nine with a three point nine error, against the J psi ratio they found on those same lattices.

Lev: The comparison between the ratios for J psi and hc shows approximate agreement when you remove the phase space differences between them. That’s a key piece of evidence.

Kai: They suggest that the production of eta prime is larger than eta production, which is what we would usually expect in this system based on standard understanding.

Mira: It points toward something specific about how those light mesons are behaving within the gauge field configurations they used for this calculation.

Lev: So even though they found a discrepancy, the immediate conclusion is that the setup itself might be different from what’s happening in nature.

Kai: It’s interesting because it shows that using contemporary techniques gives us a way to get results with high statistical precision on these kinds of charmonium transitions.

Mira: And while they have this result for the hc state, they acknowledge that the sensitivity of the eta prime system to detailed properties of gauge field configurations might not be shared by other light meson final states.

Lev: So the next move is looking at multi-hadron production like J psi decaying to gamma pi pi and coupled channel J psi decaying to gamma kappa kappa on page one of that work.

Kai: That’s the direction they are heading, looking at more complex final states to see if we can get a clearer picture.

Mira: It’s a logical progression since the current results give us a strong hint about where to look next in this field.

More episodes

← Home