Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability

summary

The gist

The basic reproductive number, R0, is widely used to determine whether an infectious disease can persist in a population In this study…

In short

The study investigates how demographic bistability—where a system can settle into either a stable fixed population or a periodic cycle—affects the calculation and interpretation of the basic reproductive number (R0) in host-parasite models. It finds that this effect depends on transmission structure: attractor dependence occurs only when a complete host-vector-host pathway exists, not just due to bistability alone.

Key concepts

Basic Reproductive Number (R0)
R0 is a key metric used to predict whether an infectious disease can spread and persist in a population. It represents the average number of secondary infections caused by one infected individual in a completely susceptible population, helping determine if an infection will grow or die out.
Demographic Bistability
This occurs when a system has multiple stable long-term states, such as a steady state (fixed point) or oscillating populations (periodic cycle). The paper examines how the choice between these two stable long-term states changes the calculated value of R0 and the invasion threshold.
Invasion Threshold
This is the critical level of infection required for a disease to successfully invade a population. In systems with bistability, this threshold can be different depending on which stable state (fixed point or cycle) the population starts in, highlighting why R0 interpretation must consider long-term dynamics.
Transmission Structure
This refers to the specific pathway an infection takes between hosts and vectors. The study shows that for attractor dependence to occur, a complete host-vector-host pathway is necessary; simple bistability alone is insufficient without this specific transmission route.

Terminology used across episodes

This episode discusses

The paper

Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability · Read on arXiv

Carli Peterson, Erika Gallo, Christopher Kribs

Department of Mathematics, The University of Texas at Arlington · Department of Teacher and Administrator Preparation, The University of Texas at Arlington

The basic reproductive number, R 0, is widely used to determine whether an infectious disease can persist in a population. However, its interpretation may become unclear when the underlying disease-free demographic dynamics exhibit multiple types of stable attractors. In this study, we investigate how demographic bistability between fixed points and periodic cycles affects the calculation and interpretation of R 0. We consider two discrete-time host-parasite models with infection: a tick-host model motivated by Borrelia burgdorferi transmission and a Nicholson-Bailey host-parasitoid model with intraspecific competition and infection. For each model, we calculate reproductive numbers associated with different disease-free attractors using the next-generation operator method and compare their invasion thresholds. In the tick-host model, the reproduction number calculated on the stable demographic cycle differs from that calculated at the positive coexistence fixed point, resulting in parameter regions where infection can invade at one demographic attractor but not the other. In contrast, in the host-parasitoid model, the host-driven invasion threshold is necessarily the same at the positive coexistence fixed point and on the host-only periodic cycles. These contrasting results demonstrate that demographic bistability alone does not necessarily produce attractor-dependent invasion thresholds. Rather, the effect of demographic dynamics on invasion depends on the structure of pathogen transmission. In particular, a complete host--vector--host transmission pathway can allow differences between demographic attractors to alter the invasion threshold. Our results emphasize the importance of considering both demographic dynamics and transmission structure when interpreting R 0 in populations with multiple stable disease-free states.

Transcript

Introduction to the show: ident: Genomics Radio. Generated commentary on the latest computational biology and genomics papers.

Ines: We're looking at the paper: "Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability".

Marcus: Here's the gist of the paper. The basic reproductive number, R0, is widely used to determine whether an infectious disease can persist in a population In this study, we investigate how demographic bistability between fixed points and periodic cycles affects the calculation and interpretation of R0.

Ines: Investigating Bistability in Host-Parasite Models The research examines two discrete-time host-parasite models with infection to see how demographic bistability between fixed points and periodic cycles affects the calculation and interpretation of R0.

Marcus: The study considers a tick-host model motivated by Borrelia burgdorferi transmission and a Nicholson-Bailey host-parasitoid model with intraspecific competition and infection.

Ines: In the tick-host model, the reproduction number calculated on the stable demographic cycle differs from that calculated at the positive coexistence fixed point, resulting in parameter regions where infection can invade at one demographic attractor but not the other.

Title and authors: Ines: So we're looking at this paper today titled "Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability." Basically, it tackles how that standard basic reproductive number, R0, can become a confusing thing when the population dynamics have multiple stable states.

Marcus: Right. It looks at how demographic bistability between fixed points and periodic cycles messes with the way we calculate and interpret R0 across two specific host-parasite models: a tick-host model and a Nicholson-Bailey model.

Yuki: That sounds interesting because in population genetics, when you have multiple stable states, the fate of the disease can really depend on which state the population is currently in.

Ines: Exactly. The paper investigates whether this demographic bistability automatically forces us to get different invasion thresholds depending on which stable attractor we're looking at.

Marcus: The key finding they present is that for the tick-host model, the R0 calculated when you look at the stable demographic cycle is actually different from what you get when you look at the positive coexistence fixed point.

Yuki: So, it means depending on whether the system settles into a steady state or a cycle, your prediction for invasion success changes.

Ines: Precisely. And they found parameter regions where infection can invade one of those demographic attractors but not the other, which is what makes this kind of bistability tricky to handle with just one R0 number.

Marcus: But they contrast that with the host-parasitoid model, where the invasion threshold at the positive coexistence fixed point is exactly the same as on those host-only periodic cycles.

Yuki: So, it suggests that not all forms of demographic bistability lead to different invasion thresholds; it depends heavily on what's happening in the transmission structure.

Ines: The paper digs into this by showing that whether demographic dynamics affect invasion depends entirely on the structure of pathogen transmission itself. They point out that a complete host vector host transmission pathway can be what allows those differences between the attractors to alter the invasion threshold.

Marcus: That's a crucial distinction because it means you need to look at both how fast things are changing demographically and where the pathogen is actually moving in terms of transmission structure when interpreting R0 in populations with multiple disease-free states.

Yuki: It really emphasizes that just having multiple stable disease-free states isn't enough on its own to create attractor-dependent thresholds for every single model.

Ines: The paper compares the tick-host model, where those different R0 values lead to genuinely different invasion thresholds, with the host-parasitoid model where they don't. That contrast shows exactly why demographic bistability produces different thresholds in one case but not the other.

Marcus: They also develop expressions for R0 under both equilibrium and oscillatory dynamics, and they find that for the tick-host model, R0 is calculated differently depending on whether the system converges to a fixed point or a cycle.

Yuki: That difference in calculation happens because in the fixed point case, transmission is constrained by factors like SL infinity and SN infinity, whereas in the synchronous two cycle case, those feeding success terms evaluate to one.

Ines: So they are showing that the temporal ordering of infection events actually influences how you get your basic reproductive number when dealing with oscillatory populations.

Marcus: The overall conclusion is that demographic bistability alone isn't enough to create different invasion thresholds; the difference comes from the interaction between the demographic attractor and the specific structure of pathogen transmission.

Yuki: It seems like a complete host vector host transmission pathway is necessary for those differences in invasion thresholds to show up in a population with multiple stable disease-free states.

Ines: The authors admit that their current work only focused on two discrete-time models and didn't establish if this pattern holds true for continuous-time systems, which is a limitation of the study.

Marcus: They also mainly looked at bistability between a fixed point and stable periodic cycles, so they didn't explore other types of multi-stability patterns.

Yuki: For future work, they suggest looking into general conditions where R0 calculated on a periodic orbit might be greater than the value calculated at a fixed point.

Ines: It’s clear that understanding pathogen invasion in multistable populations requires us to consider both the long-term demographic state and the complete pathway through which infection is transmitted.

Marcus: So, to wrap up, they used this study on "Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability" to show that you need more than just looking at demographic dynamics when you're dealing with multiple stable disease-free states.

Yuki: It puts the focus on the specific transmission structure—like vector involvement—as the deciding factor for whether those demographic differences translate into different invasion thresholds.

Ines: That's it for this paper. It makes us realize that when we calculate R0, we can't just pick one value; we have to know what kind of dynamics the population is actually settling into and how the pathogen moves through it.

The paper's summary: Ines: So we're looking at how demographic bistability in host-parasite models affects the basic reproductive number, R0, across two different types of systems.

Marcus: Right, so the core idea is that when you have multiple stable states—like a steady population size versus one that cycles periodically—the R0 you calculate for each state can be completely different.

Yuki: From a population genetics standpoint, this means your prediction for whether an infection takes hold depends entirely on which stable demographic attractor the system lands on.

Ines: Exactly. The authors show that in one model, like a tick-host system, you get genuinely different invasion thresholds depending on whether you start at the fixed point or somewhere on the periodic cycle.

Marcus: But they contrast that with another model, a host-parasitoid one where the invasion threshold is actually the same regardless of whether you're looking at the fixed point or a host-only cycle.

Yuki: That difference points directly to how the pathogen transmits between hosts versus just within one host population.

Ines: The paper suggests that demographic bistability by itself isn't enough to cause different invasion thresholds; you need to look at how transmission is structured, like having a complete host vector host pathway.

Marcus: That's the crucial mechanism here, showing that if you have a vector involved in the infection chain, then those two different demographic attractors will produce different outcomes for R0.

Yuki: So it’s not just about the population settling into a certain size; it’s about the full route of infection and how that route interacts with the dynamics.

Ines: They did derive these R0 expressions for both equilibrium and oscillatory dynamics, and they found that for oscillatory populations, you have to account for the temporal ordering of infections when calculating the basic reproductive number.

Marcus: That means even in a cycle, you can't just use one average value; the way infection events are sequenced matters.

Yuki: It really grounds the abstract idea of bistability in concrete transmission pathways and population history.

Ines: Now, what this means for us is that when we model real-world diseases with complex dynamics, we have to go beyond just finding one stable state and consider the full structure of transmission.

Marcus: So it’s a warning that relying on a single R0 value can lead you astray if the underlying system is capable of having multiple stable disease-free states.

The paper's improvements: Ines: So we're looking at what the authors suggest to fix some of the limitations in this study on R0 calculations in these bistable systems.

Marcus: They point out that their current work is mostly focused on two discrete-time models, and they want to know if this pattern holds true for continuous-time systems too.

Yuki: I think that's important because real biology rarely follows perfectly discrete steps; we need to see if these results generalize to more complex time scales.

Ines: They also mention that their analysis mainly focused on bistability between a fixed point and a periodic cycle, so they don't know if the same issue happens with other types of multi-stability.

Marcus: So what they're suggesting is that future work should look for general conditions where the R0 calculated on a periodic orbit might actually be greater than the value calculated at that fixed point.

Yuki: That would be a big step because it addresses whether cycles inherently mean higher transmission potential in these scenarios.

Ines: And they also want to investigate what happens when you look at different types of bistability, not just the fixed point versus the cycle dynamic.

Marcus: It sounds like they’re looking for a way to map out exactly which transmission structures trigger those different invasion thresholds we talked about earlier.

Yuki: This moves the discussion from just describing what happens in two specific systems to finding a universal rule for when attractor dependence occurs.

Ines: They're trying to figure out if there are general conditions under which R0 calculated on a periodic orbit is greater than the value calculated at a fixed point.

Marcus: That would be useful for anyone trying to use R0 as a quick predictor in complex ecological or epidemiological models where population dynamics might be oscillatory.

Yuki: It helps bridge the gap between theoretical math and what we actually observe in evolving host-parasite populations across history.

Ines: So, they're pushing for broader tests to see if this R0 calculation thing is a universal feature of these systems or just a quirk of the specific models they chose.

Conclusion: Tom: So we're wrapping up this look at "Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability." We've seen how R0 can change depending on whether the population is fixed or cycling, and how that depends on transmission structure.

Ines: Exactly. The main point is that demographic bistability alone doesn't automatically mean different invasion thresholds for every possible setup.

Marcus: That's what they showed: you need to look at the whole pathway of infection, like if a vector is involved, for those attractor differences to matter statistically.

Yuki: From a population history view, it means we can't just rely on one R0 number; we have to know where the population is going demographically and how the pathogen moves through that specific structure.

Ines: It really changes how we interpret these numbers in situations with multiple disease-free states; you can't just pick one value.

Marcus: And they did flag a limitation, though, that their current work is mostly in discrete-time models, so we don't know if this holds for continuous dynamics.

Yuki: That’s a fair caveat because real life isn't always perfectly stepped; we need to see if these findings scale up to more realistic biological systems.

Ines: For the future, they want to see if there are general conditions where R0 on a periodic orbit is larger than the value at a fixed point.

Marcus: That would be useful for anyone modeling things that naturally oscillate; it gives us a mathematical tool to predict when cycles might actually lead to higher invasion rates.

Yuki: It’s about finding the underlying rule that governs how population dynamics and transmission interact across different models.

Ines: So, understanding this paper, "Basic Reproductive Numbers in Host-Parasite Systems with Demographic Bistability," means we need a more holistic view of disease spread than just calculating a single R0 value.

More episodes

← Home