PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3
summary
The gist
Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz…
In short
PRIMO is a training-free optimizer that jointly optimizes base-station precoding, RIS phase shifts, and RIS placement for outdoor-to-indoor coverage in 5G/6G networks. It uses a GPU-accelerated batch method to find the best configuration without needing training data. The method significantly improves minimum user rates and converges much faster than traditional alternating optimization methods.
Key concepts
- Alternating Optimization (AO)
- A standard approach where optimization is done in separate steps: first optimizing the base station signal, then the RIS phases, and finally choosing the best RIS location. This method is slow because it cycles through these blocks sequentially, which doesn't capture complex interactions between precoding and placement simultaneously.
- PRIMO
- A new GPU-accelerated joint optimizer that eliminates the block-coordinate structure of AO. PRIMO updates the base station precoder and RIS phases simultaneously in every step, leading to faster convergence and better performance by treating all variables together.
- Unit-Modulus Constraints
- Mathematical rules requiring that the phase factors used in beamforming (like RIS phase shifts) must have a magnitude of 1. This constraint makes the optimization problem non-convex and difficult to solve, as it forces the solution onto a complex geometric shape called a manifold.
- Outdoor-to-Indoor (O2I) Coverage
- The challenge of ensuring reliable mobile network service inside buildings when signals are transmitted from outside. This is complicated by building materials like concrete and glass, which cause significant signal loss and unpredictable channel changes that need careful management.
Terminology used across episodes
This episode discusses
- PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3 · Paper Radio
- Site-Specific RIS Deployment in Cellular Networks via Calibrated Ray Tracing
- The Complex Gradient Operator and the CR-Calculus
The paper
PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3 · Read on arXiv
NYU WIRELESS
Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz, degrading outdoor-to-indoor (O2I) coverage. A reconfigurable intelligent surface (RIS) on a neighboring building bypasses this blockage by focusing energy onto indoor users. This paper introduces PRIMO (Parallel RIS Min-Rate Optimization), a training-free joint optimizer of base-station precoding, RIS phase shifts, and RIS placement, validated by calibrated ray tracing in a MetroTech Commons digital twin (Brooklyn, NY) at 6.75 and 16.95 GHz. At equal physical aperture, half-wavelength spacing packs 6.25 times as many elements per array at FR3 as at FR1(C), so FR1(C) leads at low indoor-user counts while FR3 dominates at higher counts, where the additional spatial degrees of freedom suppress inter-user interference. Above a 1 bps/Hz service floor, PRIMO supports 92% more indoor users at FR3 than at FR1(C), and raises the minimum user rate by up to 90% over a fully converged alternating-optimization baseline while running about 100 times faster.
Transcript
Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3".
Dev: Here's the gist of the paper. Upper mid-band spectrum is promising for 5G and 6G cellular networks, yet concrete and low-emissivity glass impose over 20 dB of building penetration loss above 2 GHz, degrading outdoor-to-indoor (O2I) coverage The paper introduces PRIMO, a training-free joint optimizer of base-station precoding, RIS phase shifts, and RIS placement validated by calibrated ray tracing in a MetroTech Commons digital twin at 6.75 and 16.95 GHz Problem Formulation The core problem addressed is maximizing the minimum user rate over base-station precoding, RIS phase shifts, and RIS position under constraints on total power and unit-modulus constraints on phases Problem (P1) is non-convex due to the unit-modulus constraints forming a manifold S N, the coupling among W, θ, and d through channel equations, and the non-smooth inner mink operator.
Rosa: The standard alternating optimization (AO) approach solves this by cycling through three blocks per iteration: the regularized zero-forcing (RZF) precoder W for fixed phases and position, element-wise (EW) phase updates for fixed W and d, and selection of the best d among Nd candidates.
Dev: For O2I, position d is a genuine third block because varying it changes the building material that the RIS-to-UE path traverses, causing channel quality jumps that phase or precoding optimization cannot address.
Rosa: Proposed Optimization Method PRIMO is proposed as a GPUparallel batch optimizer designed to eliminate the block-coordinate structure entirely, addressing limitations of AO-EW.
Title and authors: Rosa: To kick things off, we're looking at the title and authors of this paper, PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3. Rosa, what do you make of that title?
Dev: It’s pretty descriptive. It tells us it’s a joint optimization problem involving beamforming and RIS placement, specifically for outdoor-to-indoor coverage in the upper mid-band frequencies.
Taro: I see the focus on FR1(C) and FR3 right there, which suggests they are looking at different frequency bands to see how it performs across the spectrum.
Rosa: Right. And who’s behind this work? It’s Mingjun Ying, Guanyue Qian, Xinquan Wang, Xingchen Liu, Ishaan S. Gupte, Dipankar Shakya and Theodore S. Rappaport from NYU WIRELESS Brooklyn.
Dev: They have a strong background in the area because they’re at NYU Wireless. That suggests the underlying theory is pretty solid for this kind of complex system design challenge.
Rosa: So, to summarize what we've heard about the title and authors, it’s a paper proposing a new method called PRIMO that uses GPU acceleration to jointly optimize beamforming and RIS placement for O2I coverage in specific frequency bands.
Dev: The implication is that they are trying to solve the complex interplay between signal transmission from the base station, the reflection off the RIS, and where you should physically place that surface.
The paper's summary: Rosa: Now let’s get into what PRIMO actually does according to their summary. It’s a training-free joint optimizer of base station precoding, RIS phase shifts, and RIS placement, validated by calibrated ray tracing in a MetroTech Commons digital twin at six point seven five and sixteen point nine five gigahertz.
Dev: The key takeaway from the summary is that they are solving the problem of maximizing the minimum user rate subject to constraints on total power and unit-modulus constraints on phases.
Taro: They specifically identify why this is hard, saying it’s non-convex because those phase constraints create a kind of manifold, and there's a coupling between all these variables through the channel equations.
Rosa: And they mention that standard alternating optimization methods cycle through precoding, then phase updates, and then choosing the best RIS position among candidates. But they point out that position is a real third block because changing it changes the building material the signal has to go through, causing channel quality jumps that just optimizing phases or precoding can't fix.
Dev: So PRIMO’s approach is different because it treats RIS placement as a genuine third block that needs to be optimized along with the others.
Rosa: Right. And they say their validation used calibrated ray tracing in a digital twin environment, which helps them get concrete results before field trials.
The paper's improvements: Dev: Let’s talk about what PRIMO actually improves over the existing methods, based on what the paper suggests. It’s designed as a GPU-parallel batch optimizer to completely eliminate the block-coordinate structure you see in alternating optimization approaches.
Taro: I like that because it changes how they handle updates. PRIMO refreshes the base station precoder every single gradient step, keeping it tightly coupled to the current phases, which is different from alternating optimization where you only recompute the precoder once per outer iteration.
Rosa: And for those phase shifts, instead of dealing with that non-smooth mink operator that makes direct gradient computation tough in traditional methods, PRIMO uses a smooth log-sum-exp surrogate function.
Dev: That smoothing lets them use Wirtinger calculus to differentiate this surrogate function with respect to the unit-modulus variables. That means they can update all the N phases at once simultaneously.
Taro: They’re using Adam with cosine-annealed step size over T steps in two progressive-pruning stages, which is meant to cut computation time down by about five times compared to a full batch optimization run.
Conclusion: Rosa: So, wrapping up the conclusion of PRIMO: they show that this method improves the minimum user rate by up to a factor of one point nine zero over fully converged alternating-optimization baselines at FR3 with sixteen indoor users <ref:2610.03887#pg1>.
Dev: They also report that it converges about one hundred times faster on just a single GPU, which is a significant speedup for real-time applications.
Taro: And they say the capacity lift is load-dependent, growing from seventy-eight percent over FR1(C) up to three hundred eighty-five percent over FR3 when you have up to twenty indoor users.
Rosa: They also found that with this method, you can support ninety-two percent more indoor users at FR3 above the one bit per second per hertz service floor compared to the alternating optimization approach.
Dev: And they suggest that the optimal RIS placement is actually a first-order design variable, meaning you decide where it goes once for the whole served area instead of every single scheduling instant. They also identify adjacent-facade placement with outdoor line of sight to the base station as minimizing cascaded path loss.
Taro: That’s important because that geometry choice directly addresses material-dependent building penetration loss, or BPL, which is something phase optimization alone just can't fix by moving the RIS along a facade track.
Rosa: So in short, PRIMO outperforms classical methods under multi-user interference and offers much faster tracking of channel variations by allowing it to optimize placement and phases together. That’s what we have for this paper today on PRIMO: GPU-Accelerated Joint Beamforming and RIS Placement Optimization for Outdoor-to-Indoor Coverage at FR1(C) and FR3.
More episodes
- Daily Summary for 2026-11-19
- 2111.07910-Mask-guided Spectral-wise Transformer for Efficient Hyperspectral Image Reconstruction
- 2203.02149-HDNet: High-resolution Dual-domain Learning for Spectral Compressive Imaging
- 2205.10102-Degradation-Aware Unfolding Half-Shuffle Transformer for Spectral Compressive Imaging
- 2311.10959-Structure-Aware Sparse-View X-ray 3D Reconstruction
- 2403.04116-Radiative Gaussian Splatting for Efficient X-ray Novel View Synthesis
- 2410.02572-Combining Pre- and Post-Demosaicking Noise Removal for RAW Video
- 2604.17453-Learned Nonlocal Feature Matching and Filtering for RAW Image Denoising
- 2603.20387-End-to-End Multi-Task Learning for Adjustable Joint Noise Reduction and Hearing Loss Compensation
- 2507.20825-Chirp-Permuted AFDM: A Versatile and Multifunctional Waveform for 6G