Switchable Ferroelectricity in Subnano Silicon Thin Films

summary

The gist

Switchable ferroelectricity in subnano silicon thin films explores possible ferroelectric silicon quantum films and discovers a low-energy variant (hex-OR-2×2-P) with energy just 1 meV/atom above…

In short

Researchers explored silicon quantum films using group and graph theory to find ferroelectric phases, discovering a low-energy variant called hex-OR-2×2-P, which is 1 meV/atom higher in energy than the ground state. This phase shows strong polarization and can be used for information storage. A new computational model predicts its stability at room temperature and suggests feasibility for silicon-based ferroelectric devices.

Key concepts

Group and Graph Theory (RG2)
This method is used to systematically explore possible ferroelectric phases in reconstructed silicon bilayers by generating many different crystal structures. It helps researchers find low-energy polar configurations, including the metastable phase hex-OR-2×2-P, which is important for understanding the material's potential.
Dielectric Response Equivariant Atomistic Model (DREAM)
This novel computational model simultaneously learns interatomic potentials and Born effective charges (BECs) in one system. It uses equivariant neural networks to predict the potential energy surface and BECs, allowing for accurate simulation of electric field effects on single-element materials like silicon.
Spontaneous Polarization
This refers to the inherent internal alignment of electric dipoles within a material, resulting from its ferroelectric nature. In hex-OR-2×2-P silicon, this polarization is significant, reaching up to 120 Pc/m in the plane of the film.
Metastable Phase
A metastable phase is an excited state of a material that is not the lowest energy configuration but can be stable under certain conditions. The paper focuses on hex-OR-2×2-P, which acts as a useful intermediate state for switching between different logic states in ferroelectric devices.

Terminology used across episodes

This episode discusses

The paper

Switchable Ferroelectricity in Subnano Silicon Thin Films · Read on arXiv

Hongyu Yua, Shihan denga, Muting Xiea, Yuwen Zhangb, Xizhi Shib, Jianxin Zhongc,b Chaoyu Heb,# Hongjun Xianga,d†

Key Laboratory of Computational Physical Sciences (Ministry of Education) · Institute of Computational Physical Sciences · State Key Laboratory of Surface Physics · Department of Physics, Fudan University · School of Physics and Optoelectronics, Xiangtan University · Center for Quantum Science and Technology, Shanghai University · Shanghai Qi Zhi Institute

Recent advancements underscore the critical need to develop ferroelectric materials compatible with silicon. We systematically explore possible ferroelectric silicon quantum films and discover a low-energy variant (hex-OR-2*2-P) with energy just 1 meV/atom above the ground state (hex-OR-2*2). Both hex-OR-2*2 and hex-OR-2*2-P are confirmed to be dynamically and mechanically stable semiconductors with indirect gaps of 1.323 eV and 1.311 eV, respectively. The ferroelectric hex-OR-2*2-P exhibits remarkable in-plane spontaneous polarization up to 120 Pc/m and is protected by a potential barrier (13.33 meV/atom) from spontaneously transitioning to hex-OR-22. To simulate the switching ferroelectricity in electric fields of the single-element silicon bilayer, we develop a method that simultaneously learns interatomic potentials and Born effective charges (BEC) in a single equivariant model with a physically informed loss. Our method demonstrates good performance on several ferroelectrics. Simulations of hex-OR-2*2-P silicon suggest a depolarization temperature of approximately 300 K and a coercive field of about 0.05 V/Å. These results indicate that silicon-based ferroelectric devices are feasible, and the ground state phase of the silicon bilayer (hex-OR-2*2) is an ideal system. Our findings highlight the promise of pure silicon ferroelectric materials for future experimental synthesis and applications in memory devices, sensors, and energy converters.

DOI: 10.1103/xlkt-4wk5

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Switchable Ferroelectricity in Subnano Silicon Thin Films".

Mira: Here's the gist of the paper. Switchable ferroelectricity in subnano silicon thin films explores possible ferroelectric silicon quantum films and discovers a low-energy variant (hex-OR-2×2-P) with energy just 1 meV/atom above the ground state (hex-OR-2×2) Both hex-OR-2×2 and hex-OR2×2-P are confirmed to be dynamically and mechanically stable semiconductors with indirect gaps of 1.323 eV and 1.311 eV, respectively The ferroelectric hex-OR-2×2-P exhibits remarkable in-plane spontaneous polarization up to 120 Pc/m and is protected by a potential barrier (13.33 meV/atom) from spontaneously transitioning to hex-OR2×2 Simulations of hex-OR-2×2-P silicon suggest a depolarization temperature of approximately 300 K and a coercive field of about 0.05 V/Å These results indicate that silicon-based ferroelectric devices are feasible, and the ground state phase of the silicon bilayer (hex-OR-2×2) is an ideal system Discovery of Metastable Phases The research systematically explored possible ferroelectric silicon quantum films using group and graph theory (RG2) This method revealed numerous ferroelectric phases, including a noteworthy semiconducting ferroelectric phase, hex-OR-2×2-P The phase hex-OR-2×2-P exhibits remarkable energetic stability, impressive in-plane spontaneous polarization and structural features similar to the ground state hex-OR2×2 The transition barrier from the non-ferroelectric hex-OR-2×2 to hex-OR-2×2-P indicates that the metastable phase can be effectively employed for information storage Development of Computational Model To simulate switching ferroelectricity in electric fields, a novel dielectric response equivariant atomistic model (DREAM) was developed DREAM simultaneously learns interatomic potentials and Born effective charges (BEC) in a single equivariant model with a physically informed loss This model enables efficient and accurate simulations of thermodynamic properties and atomic behavior in electric fields, even for single-element materials The atomic force under electric fields can be written as F i,β = −dE(u)/du i,β + ∑Z i,α,β(u)Eα/α Validation and Performance Metrics The DREAM model was validated by generating datasets for LiNbO3, ZnHfN2 and silicon bilayer and the results are shown in Table 1 The potential of hex-OR-2×2 and hex-OR-2×2-P for applications in ferroelectric storage devices (FESDs) raises our interest regarding their experimental feasibility MD simulations based on the neural network model show that both hex-OR-2×2 and hex-OR-2×2-P remain stable at room temperature and can reliably store information under power failure conditions The polarization switching field of 0.05 V/Å in room temperature, strong fatigue resistance, and complete ferroelectric behavior confirmed their information writing capability Thermodynamic Stability Analysis The thermodynamic stability of hex-OR-2×2-P and hex-OR-2×2 using molecular dynamics (MD) simulations shows that both phases remain stable at room temperature The simulation results show that both hex-OR-2×2 and hex-OR-2×2-P remain stable at room temperature and can reliably store information under power failure conditions Further DFT calculations under 5% compressive stress reveal that the energy difference between hex-OR-2×2-P and the flat transition structure II in Fig.

Kai: 1(c) is 31 meV/atom—higher than the value without stress of 23 meV/atom This indicates that compressive stress could further increase the Curie temperature to about 400 K In conclusion, the group and graph theory (RG2) is employed to explore elementary ferroelectricity in reconstructed silicon bilayers We found many ferroelectric candidates including an asymmetric one (hex-OR-2×2-P) with energy just 1 meV/atom higher than the antiferroelectric ground state of hex-OR-2×2 The ferroelectric hex-OR-2×2-P was confirmed to be dynamically and mechanically stable semiconductors with remarkable in-plane spontaneous polarization up to 120 Pc/m With the hex-OR-2×2 as intermediate state, the single-side switching barrier between the two logic states in hex-OR-2×2-P is evaluated to be 13.33 meV/atom Furthermore, the dielectric response equivariant atomistic model is developed to predict the potential energy surface and Born effective charges simultaneously and simulate electric-induced behaviors, validated by several ferroelectrics With the simulations based on the trained model of silicon bilayer, the potential of hex-OR-2×2-P for ferroelectric storage devices was evaluated with stable ferroelectric orders below 300K, showing reliable information storage The polarization switching field of 0.05 V/Å in room temperature, strong fatigue resistance, and complete ferroelectric behavior confirmed their information writing capability Page 1 --- Switchable Ferroelectricity in Subnano Silicon Thin Films Hongyu Yua,d,Shihan denga,d Shihan denga, Yuwen Zhangb, Xizhi Shib Jianxin Zhongc,b Chaoyu Heb,% Hongjun Xianga,d† aKey Laboratory of Computational Physical Sciences (Ministry of Education), Institute of Computational Physical Sciences, State Key Laboratory of Surface Physics, and Department of Physics, Fudan University, Shanghai 200433, China b School of Physics and Optoelectronics, Xiangtan University, Xiangtan 411105, China cCenter for Quantum Science and Technology, Shanghai University, Shanghai 200444, China dShanghai Qi Zhi Institute, Shanghai 200030, China aThese authors contributed equally hechaoyu@xtu.edu.cn hxiang@fudan.edu.cn; Recent advancements underscore the critical need to develop ferroelectric materials compatible with silicon We systematically explore possible ferroelectric silicon quantum films and discover a low-energy variant (hex-OR-2×2-P) with energy just 1 meV/atom above the ground state (hex-OR-2×2) Both hex-OR-2×2 and hex-OR2×2-P are confirmed to be dynamically and mechanically stable semiconductors with indirect gaps of 1.323 eV and 1.311 eV, respectively The ferroelectric hex-OR-2×2-P exhibits remarkable in-plane spontaneous polarization up to 120 Pc/m and is protected by a potential barrier (13.33 meV/atom) from spontaneously transitioning to hex-OR2×2 To simulate the switching ferroelectricity in electric fields of the single-element silicon bilayer, we develop a method that simultaneously learns interatomic potentials and Born effective charges (BEC) in a single equivariant model with a physically informed loss Our method demonstrates good performance on several ferroelectrics Simulations of hex-OR-2×2-P silicon suggest a depolarization temperature of approximately 300 K and a coercive field of about 0.05 V/Å These results indicate that silicon-based ferroelectric devices are feasible, and the ground state phase of the silicon bilayer (hex-OR-2×2) is an ideal system Main text Two-dimensional (2D) ferroelectric materials has garnered significant attention, owing to their promising applications in sensors, actuators, and energy devices

1–5: Discoveries in materials like CuInP2S6

6: , SnTe

7,8: , and In2Se3

9: have expanded the range of materials for low-dimensional memory devices

1,10: Particularly compelling is the potential to integrate them with silicon chips, a development that could revolutionize high-performance, low-power memory, and electronic devices Hafnium oxide (HfO2)-based materials have garnered interest due to their stable ferroelectric properties at thicknesses less than 10 nanometers and compatibility with existing silicon technology

11,12: Unfortunately, HfO2-based ferroelectric materials are plagued by challenges like fatigue, imprinting, and difficulties with surface manipulation, which adversely affect device performance and reliability

13: Recent researches suggest potential ferroelectricity in single-element 2D bismuth

14: and silicon

15,16: However, researches about silicon-based ferroelectricity leave critical aspects such as the Curie temperature (Tc) and the feasibility of polarization reversal under electric fields unresolved Addressing these issues is pivotal for realizing the full potential of 2D ferroelectrics integrated with silicon substrates

21,22: To investigate the ferroelectric behavior of silicon bilayer, ab initio molecular simulations can be a powerful tool However, large-scale first-principles simulations require extensive computational resources Recently developed machine learning potentials offer a promising alternative for such simulations

23,24: As for simulations under electric field, most machine learning potentials typically treat Born effective charges (BECs) as constants or use point charge models However, these approaches with fixed zero charge model are not suitable for single-element materials like silicon bilayer Current potentials are limited to energy predictions and do not account for BECs Therefore, developing a novel neural network that dynamically predicts potential energy surface (PES) and BECs based on atomic structure is thus critical In this Letter, we report the discovery of a metastable ferroelectric phase in silicon bilayer with group and graph theory (RG2)

25–27: Possible silicon quantum films of reconstructed silicon bilayer are systematically explored in a high-throughput manner, revealing numerous ferroelectric phases A noteworthy semiconducting ferroelectric phase, hex-OR-2×2-P, exhibits remarkable energetic stability, impressive in-plane spontaneous polarization and structural features similar to the ground state hex-OR2×2 The transition barrier from the non-ferroelectric hex-OR-2×2 to hex-OR-2×2-P indicates that the metastable phase can be effectively employed for information storage Furthermore, we have developed a dielectric response equivariant atomistic model (DREAM), which simultaneously learns MLFF and BEC and validated by several ferroelectrics Molecular dynamics (MD) simulations based on DREAM indicate a depolarization room temperature and small coercive field for hex-OR-2×2-P silicon Additionally, MD results demonstrate that information can be written using either metastable polarized states (hex-OR-2×2-P) or non-ferroelectric ground states (hex-OR2×2) as the starting point Prediction of silicon quantum films derived from silicon bilayer has been widely studied

28–33: Using the random method based on graph and group theory implemented in RG2, known for generating crystal structures with specific geometry features

26,27,31,34–37: , we produce a variety of silicon bilayer configurations with detailed search information provided in the supplementary materials (SM) and Fig.

Mira: S1-S3 Hex-OR-2×2 is identified as the energy ground state structure between silicon quantum films whose layer thickness below 5.7 Å

29: While the ground state remains the nonpolar hex-OR-2×2, RG2 uncovers several low-energy polar configurations Hex-OR-2×2-P, as the polarized state with the lowest energy for layer thickness below 5.7 Å, closely matches the energy and thickness of the ground state hex OR 2×2

29: As shown in Fig.

Kai: 1(c), there is one pair of 3-coordinated Si atoms per cell at each surface in hex-OR-2×2 and hex-OR-2×2-P, forming dangling bonds In hex OR 2×2, the polarization cancels out, making it antiferroelectric The value of BECs of dimer atoms of structure I and II are large instead of zero and shown in Fig.

Paper summary: Kai: So to wrap up what we just covered about Switchable Ferroelectricity in Subnano Silicon Thin Films, this paper systematically explored possible ferroelectric silicon quantum films using group and graph theory, or RG two.

Mira: That method revealed a lot of different ferroelectric phases including this noteworthy semiconducting ferroelectric phase called hex OR two by two P.

Lev: The key thing is that hex OR two by two P exhibits remarkable energetic stability and structural features that look similar to the ground state hex OR two by two, even though it's polarized.

Kai: The transition barrier from the non-ferroelectric hex OR two by two to this phase, hex OR two by two P, tells us that this metastable phase can be effectively employed for information storage.

Mira: They also developed a new computational model called DREAM to simulate switching ferroelectricity in electric fields, which simultaneously learns interatomic potentials and born effective charges in a single equivariant model with a physically informed loss.

Lev: That DREAM model is critical because most machine learning potentials treat born effective charges as constants or use point charge models, but this one dynamically predicts the potential energy surface and born effective charges based on atomic structure.

Kai: And they validated this model by generating datasets for materials like lithium niobate, zinc hafnium n two, and silicon bilayer.

Mira: The MD simulations based on the trained model show that both hex OR two by two and hex OR two by two P remain stable at room temperature and can reliably store information under power failure conditions.

Lev: And they found a polarization switching field of zero point zero five volt per angstrom at room temperature, along with strong fatigue resistance and complete ferroelectric behavior, which confirms its information writing capability.

Conclusion: Kai: Looking at the paper Switchable Ferroelectricity in Subnano Silicon Thin Films and the authors Hongyu Yua, Shihan denga, Muting Xiea, Yuwen Zhangb, Xizhi Shib Jianxin Zhongc, and Chaoyu Heb.

Mira: So what this all means in simpler terms is that they’ve found a way to engineer silicon layers that can switch their electric polarization using a metastable phase called hex OR two by two P.

Lev: It moves us past just thinking about materials like hafnium oxide, because now we have a concrete candidate for using pure silicon for ferroelectric storage devices.

Kai: The paper shows the ground state, hex OR two by two, is an ideal system to start with, and this polarized state is just one meV per atom higher in energy than that ground state.

Mira: It confirms that these silicon-based systems can be stable below three hundred Kelvin and show reliable information storage under power failure conditions because of the switching field being zero point zero five volt per angstrom at room temperature.

More episodes

← Home