Sub-nanosecond structural dynamics of the martensitic transformation in Ni-Mn-Ga
summary
The gist
Martensitic transformations drive a multitude of emerging applications, which range from high stroke actuation and mechanocaloric refrigeration to thermoelastic energy harvesting The paper presents a…
In short
Researchers used synchrotron X-ray diffraction to study a 270 fs laser-induced martensitic transformation in a Ni-Mn-Ga thin film. They found that this transformation cycle, from martensite to austenite and back, can complete within 5 nanoseconds. The study highlights the large lattice distortions involved and shows that both temperature and stress significantly influence the speed of these structural changes.
Key concepts
- Martensitic Transformation
- This is a structural change in shape memory alloys where the crystal lattice distorts significantly, similar to a phase change. In this Ni-Mn-Ga system, the distortion is very large (about 24%), making it unique among other structural changes.
- Synchrotron X-ray Diffraction
- This technique uses intense X-rays from a synchrotron to probe the crystal structure of materials in real time. It allows researchers to directly observe how the atomic arrangement changes during the transformation process without needing invasive methods.
- Lattice Distortion
- This refers to how much the atoms within the crystal structure move relative to each other during a transformation. Martensitic transformations are notable because they involve very large lattice distortions, which is a key feature studied in this research.
Terminology used across episodes
This episode discusses
The paper
Sub-nanosecond structural dynamics of the martensitic transformation in Ni-Mn-Ga · Read on arXiv
Yuru Ge, Fabian Ganss, Daniel Schmidt, Daniel Hensel, Mike J. Bruckhoff, Sakshath Sadashivaiah, Bruno Neumann, Mariana Brede, Markus E. Gruner, ¡ Klara Lünser, ¡ Sebastian F๊hler
Institute of Ion Beam Physics and Materials Research Helmholtz-Zentrum DresdenRossendorf · Institute of Materials Science TU Dresden · Leibniz-Institut f๋r Kristallzüchtung Berlin · TXproducts UG Hamburg · Faculty of Physics and Center for Nanointegration Duisburg-Essen University of DuisburgEssen · Helmholtz-Institut Jena Helmholtz-Zentrum Schwerionenforschung GmbH Institute of Process Engineering and Environmental Technology TU Dresden Institute for Energy and Materials Processes Applied Quantum Materials University of DuisburgEssen Research Center Future Energy Materials and Systems University of DuisburgEssen
Martensitic transformations drive a multitude of emerging applications, which range from high stroke actuation and, mechanocaloric refrigeration, to thermoelastic energy harvesting. All these applications benefit from faster transformations, as a high cycle frequency is essential for achieving high power density. However, systematic investigations of the fast dynamics and fundamental speed limits of martensitic transformations are scarce. Especially for ultrashort time transformations, the temperature evolution throughout the transformation is not measured, which is a substantial shortcoming as temperature is the intrinsic force driving the transformation. Here, we present a synchrotron-based time-resolved X-ray diffraction study of a 270 fs laser-induced martensitic transformation in a Ni-Mn-Ga-based epitaxial thin film. We observe the transformation from martensite to austenite within about 100 ps, just limited by the synchrotron probe pulse duration. Furthermore, a full transformation cycle from martensite to austenite and back to martensite can almost be finished within 5 ns, which is the fastest martensitic transformation reported so far. Measurements and calculations of the temperature evolution allow us to analyse the influence of temperature on transformation time. By time-resolved strain measurements we demonstrate that in addition to temperature, thermal film stress must be considered as a competing influence on the martensitic transformation. Our experimental findings are supported by molecular dynamics simulations with machine learned force fields adapted to density functional theory calculations. These reveal that the huge distortion during a martensitic transformation requires the collective movement of many atoms within the microstructure, which delays the transformation.
DOI: 10.1038/s43246-026-01317-4
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Sub-nanosecond structural dynamics of the martensitic transformation in Ni-Mn-Ga".
Mira: Here's the gist of the paper. Martensitic transformations drive a multitude of emerging applications, which range from high stroke actuation and mechanocaloric refrigeration to thermoelastic energy harvesting The paper presents a synchrotron-based time-resolved X-ray diffraction study of a 270 fs laser-induced martensitic transformation in a Ni-Mn-Ga-based epitaxial thin film Fundamental Speed Limits and Structural Distortion Structural transformations in shape memory alloys enable a broad range of emerging applications, including high force, high stroke actuation sensing mechanocaloric refrigeration and waste heat harvesting The fundamental speed limits of martensitic transformations are yet unexplored Among structural transformations, martensitic transformations are remarkable because they exhibit very large lattice distortions For example, in the Ni-Mn-Ga system examined here, the lattice distorts by about 24% much more than the 0.3% distortion at the isostructural transformation in FeRh – one of the first systems used for time dependency experiments These two orders of magnitude larger of lattice distortions make martensitic transformations unique among structural transformations The joint movement of many atoms implies that martensitic transformations should be slower than other structural transformations, but timeresolved experiments on this class of functional materials are sparse Probing Transformation Dynamics with Synchrotron X-ray Diffraction The researchers use synchrotron-based time-resolved X-ray diffraction to probe changes of the crystal structure during a martensitic transformation directly and non-invasively They first examine a broad laser - x-ray delay range from-500 to 5,000 ps to gain an overview of the complete transformations from martensite to austenite and back The complete transformation from martensite to austenite within the duration of the laser pulse is observed A full transformation cycle from martensite to austenite and back to martensite can almost be finished within 5 ns, which is the fastest martensitic transformation reported so far Influence of Temperature and Stress on Transformation Kinetics Measurements and calculations of the temperature evolution allow for an analysis of the influence of temperature on transformation time By time-resolved strain measurements, it is demonstrated that in addition to temperature, stress must be considered as a competing influence on the martensitic transformation The competition between thermal film strain and over-heating temperature indicates that temperature is not the only relevant factor for a martensitic transformation The use of synchrotron diffraction allows to quantify the biaxial film strain, originating from thermal stress Atomistic Insights from Machine Learned Force Field Simulations Molecular dynamics simulations with machine learned force fields (ML-FF) trained on energies and forces obtained from density functional theory (DFT) reveal that the huge distortion during a martensitic transformation requires the collective movement of many atoms within the microstructure, which delays the transformation The ML-FF models the influence of microstructure and an epitaxially strained interface on the dynamics of the martensite-austenite transition Simulations suggest that a large distortion appears to slow down the transformation Guidelines for Achieving Fast Complete Transformation Cycles To reach a fast complete M→A→M transformation within 5 ns, five conditions are analyzed: 1.
Kai: A fast pump pulse is necessary, which was realized with a 270 fs laser pulse 2.
Mira: Fast heating with the 270 fs laser pulse is possible since the film thickness of 50 nm is comparable to the extinction length of the laser of 62 nm 3.
Kai: Heat dissipation can only occur towards the substrate since film temperature is too low for radiation losses and nanoseconds are too short for convection 4.
Paper summary: Kai: We’re wrapping up on this paper about "Sub-nanosecond structural dynamics of the martensitic transformation in Ni-Mn-Ga." Basically, they used X ray diffraction to watch a phase change happen really fast in a thin film.
Kai: We’re building the window to see this happen fast using these experiments, and that opens up designing materials where we can engineer these structural dynamics for high speed actuation >
Mira: It matters because we now have a much clearer idea of how these materials switch phase, which helps us predict their performance better in those complex scenarios >
Lev: It tells us where the overhead really lands when you try to push these systems toward faster operational regimes, so we can build the necessary error correction for real hardware >
Kai: So what's next is taking this understanding and applying it to practical things like high stroke actuation, where those dynamics are actually needed.
Conclusion: Kai: So we're wrapping up on "Sub-nanosecond structural dynamics of the martensitic transformation in Ni-Mn-Ga." Basically, this paper used synchrotron X ray diffraction to watch a phase change happen really fast in a thin film made of nickel manganese gallium.
Mira: That’s right, and the authors are looking at how those atomic movements work when you hit the material with a laser pulse. It’s all about seeing the structure change directly, not just guessing what happens later in time.
Lev: From an error correction standpoint, it’s interesting because they mapped out a specific speed limit for this transformation cycle, and we have to build our hardware to respect that timeline.
Kai: Exactly, the authors show that this complete transformation cycle—martensite to austenite and back—can finish in almost five nanoseconds using a two hundred seventy femtosecond laser pulse. That’s incredibly fast for these kinds of materials.
Mira: And what they really drive home is that temperature alone isn't the only thing controlling the speed; stress, or strain, has to be factored in as a competing influence during that transformation process.
Lev: That makes sense because if you're trying to run this on real hardware, you can't just treat it as a simple thermal switch; you need to model that biaxial film strain they measure using the X ray data.
Kai: And their machine learned force field simulations support this by showing that the massive lattice distortion requires a lot of collective atomic movement, which actually tends to slow down the transformation dynamics.
Mira: So, if we're talking about what this means for applications, it confirms that these structural changes are complex kinetic events involving interface movement and pinning sites, not just simple diffusionless switches.
Lev: It helps us understand exactly where the dynamic barriers are when we try to accelerate these materials beyond those nanosecond limits.
Kai: So the main point is that they’ve given us a clearer picture of how fast this material can switch phases, and it requires a specific combination of ultrafast excitation and controlled cooling to achieve that speed.
Mira: It really grounds the theory in what we actually see experimentally, showing that we can predict performance better when we account for all those strain and microstructure effects.
Lev: The challenge now is taking this level of atomic detail into something functional, like high speed actuation, where those dynamics matter for reliable operation.
Kai: That's the path forward—bridging the gap between ultrafast physics and building robust devices for things like mechanocaloric refrigeration.
Mira: We’ll see how understanding this kinetic pathway helps us predict how these systems will react under different operating conditions, especially when stress is involved.
Lev: So, we need better models for the structural evolution under thermal load because if you don't include that stress component, your simulation won't match reality.
Kai: We’re building the window to see this happen fast using these experiments, and that opens up designing materials where we can engineer these structural dynamics for high speed actuation.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals