Generalised Fluctuating Dynamic Density-Functional Theory: Derivation and Applications
summary
The gist
Classical density-functional theory (DFT) is a powerful theoretical framework to include particle-level information to determine the single-body density of an inhomogeneous equilibrium fluid The…
In short
This work derives a generalized fluctuating Density-Functional Theory (FDDFT) from microscopic Hamiltonian dynamics using Zwanzig’s projection operator method. It provides a framework to describe stochastic dynamics of fluid observables at mesoscopic and macroscopic scales, leading to non-isothermal extensions of fluctuating Navier-Stokes equations.
Key concepts
- Entropy Functional
- This functional describes the system's thermodynamic state and governs the dynamics. Unlike free energy, which is for equilibrium, the entropy functional is more appropriate for systems far from equilibrium, allowing the theory to handle non-equilibrium processes effectively.
- Zwanzig’s Projection Operator Method
- This technique is used to systematically describe the dynamics of relevant (slow) observable fields by projecting the full microscopic dynamics onto a reduced set of variables. It helps bridge the gap between microscopic particle interactions and macroscopic fluid behavior.
- Generalized FDDFT (FDDFT)
- This is a stochastic formulation derived from first principles that describes how coarse-grained observables evolve. It incorporates reversible, dissipative, and stochastic contributions linked to microscopic dynamics via the Liouville operator and fluctuation-dissipation theorem.
Terminology used across episodes
This episode discusses
- Generalised Fluctuating Dynamic Density-Functional Theory: Derivation and Applications · Paper Radio
- Well-Posedness and Equilibrium Behaviour of Overdamped Dynamic Density Functional Theory
- Looking at bare transport coefficients in fluctuating hydrodynamics
- Lectures on non-equilibrium effective field theories and fluctuating hydrodynamics
The paper
Generalised Fluctuating Dynamic Density-Functional Theory: Derivation and Applications · Read on arXiv
Imperial College, London
Classical density-functional theory (DFT) determines the equilibrium density distributions of complex many-body systems by bridging microscopic and macroscopic fluid descriptions via a free-energy variational principle. For time-dependent settings, dynamic DFT (DDFT) extends this formalism to govern the evolution of relevant order parameters, typically the number density. However, deterministic DDFT fails for mesoscopic systems far from equilibrium, where non-negligible thermal fluctuations require a stochastic extension: fluctuating DDFT (FDDFT). Here, we derive a generalised FDDFT from first principles, starting from microscopic Hamiltonian dynamics via systematic coarse-graining and Zwanzig's projection operator formalism. The resulting equations govern arbitrary observable fields driven by thermodynamic forces from a general entropy functional. These dynamics decompose into reversible, dissipative, and stochastic contributions, explicitly linked to microscopic mechanics via the Liouville operator, Green-Kubo relations, and the fluctuation-dissipation theorem, respectively. To delineate these coarse-grained descriptions, we show that ensemble averaging over fluctuations reduces our framework to a generalised macroscopic DDFT. Finally, we demonstrate the breadth of our formalism by applying it to two prototypical fluid classes. In the colloidal regime, it recovers the recently established colloidal FDDFT. For simple atomic and molecular fluids, we derive the non-isothermal Landau--Lifshitz fluctuating Navier-Stokes equations, providing a first-principles foundation for this classical phenomenological model and clarifying its statistical-mechanical assumptions.
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Generalised Fluctuating Dynamic Density-Functional Theory".
Mira: Here's the gist of the paper. Classical density-functional theory (DFT) is a powerful theoretical framework to include particle-level information to determine the single-body density of an inhomogeneous equilibrium fluid The resulting FDDFT and DDFT equations are governed by an entropy functional, elucidating the nonequilibrium relevance and suitability of this FDDFT, due to the entropy being more appropriate for systems far from equilibrium compared to the free energy which is strictly speaking an equilibrium quantity Derivation of Fluctuating Dynamics The paper derives a generalized fluctuating DDFT from first principles starting from microscopic Hamiltonian dynamics using coarse-graining techniques, including Zwanzig’s projection operator method The dynamics consist of reversible, dissipative, and stochastic contributions, each directly linked to the underlying microscopic dynamics via the Liouville operator, Green-Kubo relations, and the fluctuation-dissipation theorem The generalized FDDFT is derived using general projection operator techniques to describe the dynamics of relevant (slow) observable fields methodically and systematically Stochastic Formulation The derivation begins with the Hamiltonian dynamics of a classical N-particle, n-species system defined by equation (1) The evolution of microscopic observables is governed by equation (3), leading to the solution Zˆ i(t) = e iLtZˆ i A Fokker-Planck equation governing the probability density p(z, t) is derived using Zwanzig’s projection operator and the Markov approximation The resulting generalized FDDFT is formulated as an SDE (13), which is what we shall term the generalised fluctuating DDFT (FDDFT) Macroscopic Limit and Transport Coefficients The deterministic generalized DDFT equation, Zi(t), follows naturally from an averaging procedure over this stochastic equation using the local Gibbs/generalised canonical distribution The resulting deterministic equation is of a simpler form compared to previous derivations which utilized time-dependent projection operators The bare and renormalised transport coefficients associated with the meso- and macroscale descriptions are clearly shown to emerge from this derivation Application to Fluids The formalism is applied to two prototypical fluid systems: colloidal and simple (atomic-molecular) viscous fluids For colloidal fluids, the overdamped regime yields an FDDFT that recovers previously found governing equations in both regimes In the underdamped regime, the observable fields are both number and momentum density, leading to a specific FDDFT For simple (atomic-molecular) viscous fluids, using our FDDFT allows for the derivation of a non-isothermal extension to the Landau-Lifshitz fluctuating Navier-Stokes equations Fluctuating Hydrodynamics The resulting equations of fluctuating hydrodynamics are extended to when the system is not isothermal, extending the phenomenological model by rigorously deriving it from underlying microscopic dynamics The final result extends the fluctuating Navier-Stokes equations to nonisothermal conditions Starting from exact microscopic Hamiltonian dynamics and coarse-graining techniques, a set of equations describing generic observable fields at two different scales, mesoscopic FDDFT and macroscopic DDFT, is derived Both are governed by an entropy functional with terms accounting for reversible and dissipative dynamics The different forms of Green-Kubo formula associated with the dissipative tensor give rise to bare and renormalised coefficients for the mesoscale and macroscale respectively Pruning redundant reasoning tokens The paper derives a generalized FDDFT from first principles starting from microscopic Hamiltonian dynamics using coarse-graining techniques, including Zwanzig’s projection operator method The resulting FDDFT applies to arbitrary observable fields, where the dynamics are driven by a thermodynamic force expressed in terms of an entropy functional The dynamics consist of reversible, dissipative, and stochastic contributions, each directly linked to the underlying microscopic dynamics via the Liouville operator, Green-Kubo relations, and the fluctuation-dissipation theorem How the training signal is built The derivation involves defining a projection operator PXˆ = Z ∫ dzδ(Zˆ − z)⟨Xˆ⟩z = ⟨Xˆ⟩Zˆ, where ⟨Xˆ⟩z = cN/omega(z) Z ∫ dΓδ(Zˆ − z)X̂(Γ), which is what we will name “the constrained average” The probability density p(z, t) is defined as p(z, t) = Z ∫ dΓΨˆ z f(Γ, 0), where we have defined that e iLtΨˆ z = Ψˆ z(t) and used the anti-adjoint nature of the Liouvillian operator The Fokker-Planck equation is derived as ∂/∂t p(z, t) = −∇z ·
V(z)p(z, t): − ∇z · M(z)omega(z)/omega(z) + ∇z · M(z)/p (12) Where the gains come from The paper shows that from our derivation of a generalized FDDFT, the deterministic counterpart follows naturally from an averaging procedure over this stochastic equation using the local Gibbs/generalised canonical distribution This gives rise to a deterministic equation that is of a simpler form compared to previous derivations which utilized time-dependent projection operators The structure of the FDDFT is identical to equation (32) except for different components containing a time-dependent Liouvillian operator Final Results The final result extends the fluctuating Navier-Stokes equations, found phenomenologically by Landau and Lifshitz
39: , to when the system is not isothermal The dissipative tensor is covariant and its symmetric part is positive semidefinite, leading to the standard H-theorem one expects from the DDFT equation (33) The resulting equations of fluctuating hydrodynamics extend the fluctuating Navier-Stokes equations to when the system is not isothermal Applications The paper derives hydrodynamic transport equations for two generic paradigmatic classical fluid classes: colloidal and atomic-molecular fluids In the case of a colloidal fluid, both overdamped and underdamped regimes are investigated For simple (atomic-molecular) viscous fluids, the full set of hydrodynamic fields—mass, momentum and energy density—is considered The resulting equations agree with those found using a Langevin formalism by Lutkso
37: The paper derives a generalized FDDFT from first principles starting from microscopic Hamiltonian dynamics using coarse-graining techniques, including Zwanzig’s projection operator method The resulting FDDFT applies to arbitrary observable fields, where the dynamics are driven by a thermodynamic force expressed in terms of an entropy functional The dynamics consist of reversible, dissipative, and stochastic contributions, each directly linked to the underlying microscopic dynamics via the Liouville operator, Green-Kubo relations, and the fluctuation-dissipation theorem Pruning redundant reasoning tokens Classical density-functional theory (DFT) is a powerful theoretical framework to include particle-level information to determine the single-body density of an inhomogeneous equilibrium fluid It has been applied successfully to a wide range of different systems in nature and technology, from phase separation, liquid-vapor interfaces, wetting and thin films and drops to crystallization pathways, complex fluids such as polymers, lipid bilayers and molecular self-assembly However, the applicability of DFT is constrained to systems in equilibrium There have been time-dependent extensions proposed, the so-called dynamic DFT (DDFT), which aims to describe not only equilibrium but also the dynamic behavior out of equilibrium DDFT has also been successfully applied to a host of different systems, such as colloidal and atomic-molecular fluids, polymers, thin films and glassy systems How the training signal is built The derivation begins with considering a classical N-particle, n-species Hamiltonian system defined by equation (1) The microstate distribution function f(q N, p N, t) is governed by the Liouville equation ∂tf(Γ, t) = −iLf(Γ, t) = ∇q α i Hˆ · ∇pα i f − ∇pα i Hˆ · ∇qα i f The evolution equation for microscopic observables is given by d/dtẐ i = iLẐ i = Zˆ i(t) = e iLtZˆ i Where the gains come from The paper introduces Zwanzig’s projection operator PXˆ = Z ∫ dzδ(Zˆ − z)⟨Xˆ⟩z = ⟨Xˆ⟩Ẑ, where ⟨Xˆ⟩z = cN/omega(z) Z ∫ dΓδ(Zˆ − z)X̂(Γ), which is what we will name “the constrained average” The probability density p(z, t) is defined as p(z, t) = Z ∫ dΓΨˆ z f(Γ, 0), where we have defined that e iLtΨˆ z = Ψˆ z(t) and used the anti-adjoint nature of the Liouvillian operator The Fokker-Planck equation is derived as ∂/∂t p(z, t) = −∇z ·
V(z)p(z, t): − ∇z · M(z)omega(z)/omega(z) + ∇z · M(z)/p (12) Final Results The generalized FDDFT is derived in equation (15), which is what we shall term the generalised fluctuating DDFT (FDDFT) The deterministic generalized DDFT equation governing the mean values of the observables, Zi(t), is given by Z˙ i(t) = ⟨iLZˆ i⟩t + k-1 B X j M¯ ij (t) · λ¯ j (t) kB The deterministic generalized DDFT equation governing the mean values of the observables, Zi(r, t), is given by ∂tZi(r, t) = D iLZˆ i(r) E z + 1/kB Z dr'M¯ (r, r', t) · δS¯
Z: δZj (r', t) Applications The paper derives the hydrodynamic transport equations for two generic paradigmatic classical fluid classes: colloidal and simple (atomic-molecular) viscous fluids In the case of a colloidal fluid, both overdamped and underdamped regimes are investigated For simple (atomic-molecular) viscous fluids, the full set of hydrodynamic fields—mass, momentum and energy density—is considered The resulting equations agree with those found using a Langevin formalism by Lutkso
37: Starting from exact microscopic Hamiltonian dynamics and coarse-graining techniques, we have rationally and systematically derived a set of equations describing the time evolution of generic observable fields at two different scales, namely, a mesoscopic FDDFT and macroscopic DDFT The FDDFT describes the stochastic dynamics of coarse-grained observables at the mesoscopic scale In contrast, the DDFT describes the dynamics of the averaged observables and thus fluctuations are washed out due to the description being at the macroscopic scale Both equations are governed by an entropy functional (albeit at different levels of description), with terms accounting for reversible and dissipative dynamics, whilst in the FDDFT case a stochastic term is also present Pruning redundant reasoning tokens Classical density-functional theory (DFT) emerged almost fifty years ago
1: , as a powerful theoretical framework to include particle-level information to determine the single-body density of an inhomogeneous equilibrium fluid It has been applied successfully to a wide range of different systems in nature and technology, from phase separation, liquid-vapor interfaces, wetting and thin films and drops to crystallization pathways, complex fluids such as polymers, lipid bilayers and molecular self-assembly
2–14: The cornerstone of the method is the construction of the appropriate (Landau) free energy associated with the system, where its minimisation retrieves the equilibrium one-body density function However, the applicability of DFT is constrained to systems in equilibrium There have been time-dependent extensions proposed, the so-called dynamic DFT (DDFT), which aims to describe not only equilibrium but also the dynamic behavior out of equilibrium DDFT has been derived in different contexts and through different approaches, phenomenogically via hydrodynamical equations
15: and a generalized Fick’s law
1: , via Newton’s equations for atomic liquids
16: , via Langevin equations for a colloidal fluid
17–22: similarly through the Smoluchowski equation, and finally, via projection operator methods
23–25: The DDFT obtained is in the form of a continuity equation where the flux is given in terms of the functional derivative of the free energy, meaning the system is a gradient flow and the dynamics are moving down the gradient of the free energy towards equilibrium at its minimum How the training signal is built The derivation starts by considering a classical N-particle, n-species, Hamiltonian system defined by equation (1) The microstate distribution function f(q N, p N, t) is governed by the Liouville equation ∂tf(Γ, t) = −iLf(Γ, t) = ∇q α i Hˆ · ∇pα i f − ∇pα i Hˆ · ∇qα i f The evolution equation for microscopic observables is given by d/dtẐ i = iLẐ i = Zˆ i(t) = e iLtZˆ i Final Results
Title and authors: Kai: So, what’s the actual substance of what the paper summarizes? What are these generalized fluctuating DDFT and DDFT equations that they are discussing?
Mira: They summarize how they derive a generalized fluctuating DDFT from first principles using coarse-graining, including Zwanzig’s projection operator method.
Kai: And the key result is that this framework applies to arbitrary observable fields, meaning it’s not just limited to density or temperature; it can describe whatever you choose to track.
Lev: The paper shows how these dynamics are driven by a thermodynamic force expressed through this entropy functional, which accounts for reversible stuff like energy changes and dissipative stuff like friction.
Mira: They detail that the dynamics have reversible, dissipative, and stochastic contributions, all linked back to the microscopic Hamiltonian dynamics via things like the Liouville operator and Green-Kubo relations.
Kai: And they also show how this leads to two levels of description: a mesoscopic fluctuating DDFT and a macroscopic generalized DDFT.
Lev: The deterministic part of that generalized DDFT equation, which describes the mean values of observables, comes out from averaging the stochastic equation using a local Gibbs or generalized canonical distribution.
Mira: That averaging procedure results in a deterministic equation that is actually simpler than previous versions because they don't rely on time-dependent projection operators for this part.
Kai: So, when you look at the actual numbers and caveats, they’re showing how bare and renormalized transport coefficients emerge from this derivation for both the mesoscale and macroscale descriptions.
The paper's summary: Mira: Now let's talk about the improvements they propose in this work, because that’s where the real substance of what they did lies. They suggest several things to make this framework better.
Kai: I see one big improvement mentioned is that their derivation allows them to rigorously recover the non-isothermal extension of the Landau-Lifshitz fluctuating Navier-Stokes equations, which is a well-known model, by deriving it from the underlying microscopic Hamiltonian dynamics.
Lev: That’s important because phenomenological models like those are often just fitting things to data; if you derive them rigorously from first principles, you get much stronger assumptions about what’s happening underneath.
Mira: Another key point is that this generalized FDDFT isn't just limited to colloidal fluids; it's proposed to recover the fluctuating Navier-Stokes equations for simple atomic-molecular viscous fluids as well.
Kai: That’s a big step because those two fluid types have very different dynamics, and showing they fit into one general framework is quite powerful.
Lev: The authors also point out that this formalism can model non-equilibrium processes like nucleation and spinodal decomposition, even when the entropy might not always increase according to the standard H theorem.
Mira: They suggest that by using this entropy functional instead of just free energy, we get a better description of non-equilibrium relevance, especially when fluctuations are large.
Kai: So they’re essentially saying this generalized FDDFT is much more robust because it handles these more complex scenarios where the simple equilibrium assumptions break down.
The paper's improvements: Mira: So to wrap up on the paper "Generalised Fluctuating Dynamic Density-Functional Theory: Derivation and Applications," they’ve shown how this new framework bridges microscopic and macroscopic descriptions using an entropy functional, which is a key innovation.
Kai: It moves us from just equilibrium descriptions to capturing real time evolution in complex systems, allowing us to see the role of fluctuations explicitly through the stochastic term.
Lev: From an engineering standpoint, they showed that the deterministic counterpart is simpler because it comes from a standard averaging procedure over the stochastic equation, which should make it easier to implement on real hardware.
Mira: And for practical applications, they’ve successfully applied this to derive hydrodynamic transport equations for both colloidal and simple atomic-molecular fluids, and even extended the Navier-Stokes equations to non-isothermal conditions.
Kai: It gives us a rigorous way to understand how these systems respond when you push them away from their ideal state, which is something we always struggle with in experiments.
Lev: What I’d add is that they clearly state a limitation: this generalized FDDFT formulation is specific only to colloidal fluids, and it won't automatically recover the fluctuating Navier-Stokes equations for simple atomic-molecular fluids without further extension.
Mira: So, the paper sets up a very solid foundation for future work, showing how to go from microscopic dynamics to macroscopic hydrodynamics in a non-equilibrium setting using this entropy functional approach.
Kai: We’ll need to see how the AI can handle applying this formalism to those other fluid classes they mention next.
Conclusion: Kai: So we’ve walked through how they built this generalized fluctuating DDFT from the ground up using Hamiltonian dynamics and Zwanzig’s projection operator method to get both mesoscopic and macroscopic descriptions of observable fields in a system, which is what this paper "Generalised Fluctuating Dynamic Density-Functional Theory: Derivation and Applications" is all about.
Mira: Yeah it really lays out how the entropy functional governs everything, linking those reversible and dissipative parts directly to the microscopic dynamics through things like the Liouville operator and Green-Kubo relations.
Lev: From where I’m sitting, this framework is interesting because it gives us a systematic way to connect those microscopic inputs to what we actually measure on hardware or in simulations without having to guess how much noise is involved.
Kai: Exactly, that deterministic equation they derived from averaging the stochastic one is much cleaner than what you get when you try to use time-dependent projection operators for the mean values.
Mira: It shows a nice mathematical consistency between the two scales, but we still have to be careful about how those bare and renormalized transport coefficients show up in those different descriptions.
Lev: For real hardware, that means we can see exactly where the noise terms and dissipation terms land when you try to run this on a noisy quantum processor.
Kai: It’s a solid foundation for understanding non-equilibrium dynamics, especially since they proved it works for things like colloidal fluids in both overdamped and underdamped regimes.
Mira: And applying it to simple atomic-molecular viscous fluids lets us see how these hydrodynamics extend to nonisothermal conditions, which is a practical extension of the Landau-Lifshitz fluctuating Navier-Stokes equations.
Lev: That nonisothermal aspect is what I’m most interested in because standard models usually assume things are isothermal and that doesn't hold true in many real systems.
Kai: So, to sum up, this paper provides a rigorous path from microscopic Hamiltonian dynamics to macroscopic hydrodynamics by systematically accounting for all the different types of dynamics—reversible, dissipative, and stochastic—using an entropy functional.
Mira: It’s a very systematic approach that clarifies the non-equilibrium relevance of using an entropy functional instead of just free energy.
Lev: And for me it confirms that if you can get your microscopic dynamics right, you can derive the macroscopic transport equations without relying on those extra phenomenological assumptions we usually have to add in.
Kai: It’s a great piece of work showing how much structure there is hidden inside the noise in these complex systems.
Mira: Anyway, that's our take on "Generalised Fluctuating Dynamic Density-Functional Theory: Derivation and Applications." Next up, we’re looking at some work on quantum error correction and how they’re trying to build those stable qubits.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals