Fr"ohlich polaron effective mass and localization length in cubic materials: degenerate and anisotropic electronic bands
summary
The gist
Polarons, that is, charge carriers correlated with lattice deformations, are ubiquitous quasiparticles in semiconductors The present work addresses such issues by keeping the continuum hypothesis…
In short
The study uses a generalized Fröhlich model to find polaron properties in 20 cubic materials, accounting for complex electronic band structures like degeneracy and anisotropy. It derives effective masses and localization lengths in both weak and strong coupling limits, revealing where simple models fail. The work provides a framework for accurately predicting polaron behavior across diverse material systems.
Key concepts
- Generalized Fröhlich Model (gFr)
- This is an advanced theoretical model used to describe polarons in cubic materials. It goes beyond the standard Fröhlich model by including multiple phonon branches and allowing for electronic band extrema that can be degenerate or anisotropic, making it suitable for real-world materials.
- Polaron Effective Mass
- This describes how an electron moves when dressed by lattice vibrations (phonons). The paper calculates this mass in different limits (weak coupling vs. strong coupling) and provides analytical formulas for anisotropic cases based on the ratio of in-plane to out-of-plane electronic masses.
- Localization Length
- This measures the spatial extent over which a polaron is localized, indicating how tightly it is bound to the lattice. The analysis distinguishes between directional lengths (ap(d), ap⊥(d), apz(d)) and determines if the localization length suggests a breakdown of the continuum hypothesis.
- Perturbation Theory vs. Feynman Path Integral
- These are two different mathematical approaches used to calculate polaron properties. The study compares them to see where they agree or disagree, showing that perturbation theory can fail in certain materials, signaling when a more complex method is needed.
Terminology used across episodes
This episode discusses
- Fr"ohlich polaron effective mass and localization length in cubic materials: degenerate and anisotropic electronic bands · Paper Radio
The paper
Fr"ohlich polaron effective mass and localization length in cubic materials: degenerate and anisotropic electronic bands · Read on arXiv
Bogdan Guster, Pedro Melo, Bradley A. A. Martin, Véronique Brousseau-Couture, Anna Miglio, Matteo Giantomassi, ÈMichel CœotŞ, Jarvist M. Frost, Matthieu J. Verstraete, Xavier Gonze
European Theoretical Spectroscopy Facility at the University of Catholique de Louvain · NanoMat/Q-Mat/CESAM at the University of Liège (B5) · Department of Physics at Imperial College London · Ôepartement de Physique et Regroupement Quécois sur les Matęriaux de Pointe at the University of Montreal · Skolkovo Institute of Science and Technology
DOI: 10.1103/PhysRevB.104.235123
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Fr"ohlich polaron effective mass and localization length in cubic materials".
Mira: Here's the gist of the paper. Polarons, that is, charge carriers correlated with lattice deformations, are ubiquitous quasiparticles in semiconductors The present work addresses such issues by keeping the continuum hypothesis inherent to the large polaron Fröhlich model but waiving the isotropic and non-degeneracy hypotheses and including multiple phonon branches Theoretical Framework The study utilizes a generalized Fröhlich model (gFr) to account for real cubic materials, which includes electronic band extrema that can be degenerate or anisotropic, and incorporates multiple phonon modes The gFr Hamiltonian is expressed in the cubic case, allowing for the summation over electronic bands and coupling to multiple phonon branches The polaron binding energy in the generalized cubic Fröhlich model is expressed as ZPR = −σ V1 Effective Mass Derivations The paper derives expressions for the polaron effective mass in both the weak-coupling limit, using many-body perturbation theory, and the strong-coupling limit, using a variational treatment For non-degenerate anisotropic cases, analytical formulas are provided for the electron polaron effective masses based on the ratio between in-plane and out-of-plane electronic effective masses, denoted as µ∗ In the three-fold degenerate case, the behavior of effective masses is described by a Luttinger-Kohn Hamiltonian matrix, leading to complex directional dependence and "warping" of the band structure Localization Length Analysis The localization lengths are analyzed in both the weak-coupling and strong-coupling regimes For non-degenerate cases, a Gaussian variational wavefunction ansatz is used to define directional localization lengths ap(d), ap⊥(d), and apz(d) In the degenerate case, the minimization problem for the multicomponent wavefunction requires considering different sets of coefficients cj and selecting the set that yields the lowest polaron formation energy Material Characterization and Limitations The formalism is applied to a set of 20 cubic materials, including II-VI compounds, III-V compounds, and oxides The results reveal that for some oxide materials the localization length is on the order of the distance between atoms, indicating a breakdown of the Fröhlich continuum hypothesis Furthermore, several studied oxide compounds exhibit a breakdown of perturbation theory in determining polaron effective masses The Feynman path integral approach is compared with the perturbative treatment, signaling where the perturbative approach fails to properly describe polaronic behavior The main results of this work are polaron properties for a set of 20 materials, obtained from the generalized Fröhlich model, with parameters determined from first principles The increased range of applicability of the gFr model with respect to the standard Fröhlich model opens the possibility to analyze a wide spectrum of polarons, including realistic treatment of effective mass anisotropy and possible band degeneracy The Feynman path integral approach signals clearly where the perturbative approach fails to properly describe the polaronic behavior Supplementary Theory The supplementary theory provides analytical formulas for the asymptotic behavior of localization lengths in the uniaxial limit, including spherical average and directional lengths It also details the properties of polaron localization length in the ellipsoidal limit, providing approximate solutions for these characteristics The supplementary tables provide DFT convergence parameters and calculated band parameters for various materials The supplementary figures illustrate the results of the analysis, showing how localization lengths vary with the ratio between electronic and polaron effective masses The supplementary tables also present calculated ZPR values from first principles compared to variational approaches The supplementary tables detail the inverse of hole polaron effective masses along different high-symmetry directions for the degenerate bands case Supplementary Figures and Tables Figure S1 shows the average squared effective mass in the uniaxial limit calculated at constant density of states expressed in terms of µ∗ Figure S3 presents calculated valence band ZPR for selected materials as in Miglio et al.
Kai: Table S6 shows the inverse of hole polaron effective masses associated with the triply degenerate valence bands along different crystallographic directions Table S8.a reports hole polaron localization lengths determined in the studied materials along different high-symmetry directions relevant to cubic materials pertaining to the degenerate electronic bands case Table S7 shows the ratio between the electronic effective mass and polaron effective mass along different directions characteristic to the degenerate electronic bands case Table S9 reports electron polaron localization length expressed in units of repetition distance between equivalent atoms Table S10 shows electron polaron localization length expressed in units of the repetition distance between equivalent atoms Table S13 presents Feynman path integral variational method parameters for the non-degenerate anisotropic case Table S5 shows second order derivative of the self-energy with respect to the wave-vector along different high-symmetry directions relevant to cubic materials Table S6 reports inverse of hole polaron effective masses associated with the triply degenerate valence bands along different crystallographic directions Table S7 reports ratio between the electronic effective mass and polaron effective mass along different crystallographic directions characteristic to the degenerate electronic bands case Table S8.b shows hole polaron formation energy in the strong coupling limit along different high-symmetry directions relevant to cubic materials pertaining to the degenerate electronic bands case Table S9 shows electron polaron localization length expressed in units of the repetition distance between equivalent atoms Table S10 shows electron polaron localization length expressed in units of the repetition distance between equivalent atoms Table S13 presents Feynman path integral variational method parameters for the non-degenerate anisotropic case Table S12 shows calculated conduction band polaron effective masses for selected materials as in Miglio et al.
Mira: Discussion The discussion section examines the possible breakdowns of basic hypotheses, such as the continuum hypothesis or validity of perturbation theory The comparison between the perturbative treatment and the Feynman variational path integral approach is made, finding them to be in reasonable agreement in the weak coupling regime The relative difference between ZPR determined using perturbation theory and Feynman variational path integral approach is shown to increase with polaron effective mass, suggesting a breakdown of weak-coupling perturbative treatment for certain oxides The comparison between the two approaches in Fig.
Kai: 10 shows that the largest difference is found in materials at the continuum limit breakdown, such as BaO and CaO The results from the Feynman approach are averaged as described in Section II B for non-degenerate anisotropic electronic dispersion In this work, we propose a formalism to describe realistic scenarios of polarons in cubic materials by including both anisotropic and degenerate electronic bands The main results are polaron properties for a set of 20 materials, obtained from the generalized Fröhlich model with parameters determined from first principles The increased range of applicability of the gFr model opens the possibility to analyze a wide spectrum of polarons, including realistic treatment of effective mass anisotropy and possible band degeneracy The study assesses the limitations of the weak-coupling approach in determining polaron effective masses, finding that several studied oxide compounds go beyond the mass breakdown limit The strong-coupling calculations determine the polaron’s ground-state energy and localization length The study concludes by comparing perturbative and variational treatments, finding them to be in reasonable agreement in the weak coupling regime Acknowledgments This work has been supported by several funding bodies including the Fonds de la Recherche Scientifique (FRS-FNRS Belgium), the Fonds de la Recherche du Qu´ebec Nature et Technologie (FRQ-NT), and the Natural Sciences and Engineering Research Council of Canada (NSERC) Computational resources were provided by various supercomputing facilities J.M.F.
Title and authors: Kai: So we're looking at this paper today titled "Fr"ohlich polaron effective mass and localization length in cubic materials: degenerate and anisotropic electronic bands. It’s pretty deep stuff, dealing with how electrons get stuck in a lattice deformation, or a polaron.
Mira: Right, it tackles the idea of these quasiparticles being everywhere in semiconductors and explores what happens when you move beyond the standard simple model to include things like broken symmetry and multiple phonon modes.
Lev: It sounds like they are taking the big continuum hypothesis that Fröhlich used and making it more realistic by ditching those assumptions about isotropy and non-degeneracy, which is exactly what we need for real materials.
Kai: Exactly. They use a generalized Fröhlich model to handle real cubic materials, meaning you can have things like electronic band extrema that are either degenerate or anisotropic, and they include multiple phonon branches in their calculations.
Mira: And the main thing they deliver is an expression for the polaron binding energy called ZPR, which they find is equal to minus sigma V one.
Lev: That ZPR calculation sounds like it’s the starting point for figuring out how stable these polarons are before we even get into the effective mass stuff.
Kai: Then they go on to derive expressions for the polaron effective mass in two different limits: the weak-coupling limit using many-body perturbation theory, and then the strong-coupling limit using a variational treatment.
Mira: For those non-degenerate anisotropic cases, they give out analytical formulas for the electron polaron effective masses based on this ratio between in plane and out of plane electronic effective masses, which they call mu star.
Lev: That mu star thing is key because it directly addresses that warping you mentioned earlier in the discussion—how different the movement is along different directions.
Kai: And for the three-fold degenerate case, they use a Luttinger-Kohn Hamiltonian matrix to describe how those effective masses behave directionally and how the band structure gets warped.
Mira: Then they move into analyzing localization lengths in both weak and strong coupling regimes, using a Gaussian variational wavefunction ansatz for non-degenerate cases to define directional localization lengths ap d, ap perpendicular d, and ap z.
Lev: For the degenerate case, it gets trickier because minimizing that wavefunction requires them to consider different sets of coefficients c j and picking the set that gives the lowest polaron formation energy.
Title and authors: Kai: They apply all this formalism to a set of twenty cubic materials, including II-VI compounds, III-V compounds, and oxides. The results show some interesting things about oxide materials where the localization length is on the order of the distance between atoms, which actually suggests a breakdown of that Fröhlich continuum hypothesis.
Mira: And they also found several studied oxide compounds where perturbation theory breaks down when it comes to determining those polaron effective masses, and they compare this to a Feynman path integral approach, which signals where the perturbative approach stops working properly.
Lev: That comparison between the Feynman path integral and the perturbative treatment is important because it tells us exactly which theoretical framework is reliable for different parts of these systems.
Kai: The main result here is that they've got polaron properties for this set of twenty materials, all calculated from first principles using the generalized cubic Fröhlich model with parameters determined from first principles.
Mira: So the paper suggests that expanding the scope of the gFr model, compared to the standard Fröhlich model, opens up a way to analyze a much wider range of polarons, including realistic treatment of effective mass anisotropy and possible band degeneracy.
Lev: That’s good because it means we can finally tackle materials that are more complex than simple isotropic ones without just throwing out the whole framework.
Kai: They also looked at how the perturbative and variational treatments compare, finding them to be in reasonable agreement in the weak coupling regime, but then they show where that agreement breaks down when you look at materials near the continuum limit breakdown.
Mira: That comparison is telling because they found that the largest difference between those two approaches happens in materials where there's a breakdown of the continuum hypothesis, like BaO and CaO.
Lev: So for someone building real hardware, knowing where perturbation theory fails is crucial because you can’t just trust that method across the board for these complex systems.
Kai: They also provided supplementary theory with analytical formulas for the asymptotic behavior of localization lengths in the uniaxial limit, including spherical average and directional lengths, as well as properties in the ellipsoidal limit.
Title and authors: Mira: Those supplementary tables are useful because they give DFT convergence parameters and calculated band parameters for various materials, which helps ground the results in actual material science data.
Lev: I’m curious about how those inverse hole polaron effective masses along different high-symmetry directions behave for those triply degenerate valence bands, as shown in table S6. That seems like a very specific piece of information for designing devices with hole transport.
Kai: Right, and table S8.a reports the hole polaron localization lengths determined in the studied materials along different high-symmetry directions relevant to cubic materials pertaining to the degenerate electronic bands case.
Mira: Table S7 shows the ratio between the electronic effective mass and polaron effective mass along different directions characteristic of those degenerate electronic bands case, which is a really direct way to see how anisotropy plays its role.
Lev: And table S5 shows the second order derivative of the self-energy with respect to wave vector along different high-symmetry directions relevant to cubic materials, which gives us insight into the energy landscape itself.
Kai: The discussion section weighs these things up by comparing perturbative and Feynman variational treatments, finding them in reasonable agreement in the weak coupling regime.
Mira: But they also note that for certain oxides, the difference between ZPR determined using perturbation theory and the Feynman variational path integral approach increases as the polaron effective mass gets bigger, suggesting a breakdown of that weak-coupling perturbative treatment.
Lev: That’s a strong point because it tells us we can’t just use simple perturbation theory blindly when dealing with stronger coupling environments.
Kai: So to wrap up, this work on "Fr"ohlich polaron effective mass and localization length in cubic materials: degenerate and anisotropic electronic bands provides polaron properties for twenty materials from first principles using the generalized cubic Fröhlich model.
Mira: The main implication is that using this more flexible gFr model lets us analyze a wider spectrum of polarons, allowing for a realistic treatment of effective mass anisotropy and band degeneracy in practice.
Lev: And it also clearly shows where the perturbative approach fails by comparing it to the Feynman path integral approach, which is important for predicting real-world performance on hardware.
Kai: So the paper shows that while weak coupling works fine, you have to use more sophisticated methods when dealing with stronger coupling or when the electronic structure is complex and anisotropic.
The paper's summary: Kai: So, this paper takes those polaron properties we talked about and puts them into a framework that actually handles real cubic materials, including things that have broken symmetry or multiple electronic bands.
Mira: Right, it’s about moving past the simple Fröhlich model assumptions—like assuming everything is isotropic—and using a generalized version to look at how these charge carriers get stuck in the lattice when the material itself is complex.
Lev: For me, that means we’re not just looking at one number for an effective mass anymore; we’re dealing with direction-dependent masses and how those directions are warped by the electronic structure.
Kai: They actually calculate this polaron binding energy, which they call ZPR, in a way that lets you see the coupling to multiple phonon branches. It’s not just one mode anymore.
Mira: That ZPR calculation is a starting point because it sets up the whole picture for how stable these polarons are before we even look at the effective mass derivations.
Lev: And they take that and derive two ways to find the polaron effective mass, one in this weak coupling limit using perturbation theory, and another in the strong coupling limit with a variational treatment.
Kai: That’s interesting because they show where those two methods actually agree, which is important for judging how reliable those measurements are supposed to be.
Mira: They also give us analytical formulas for non-degenerate cases that depend on this ratio between in plane and out of plane electronic effective masses, which they call mu star.
Lev: That mu star thing is what lets you predict the anisotropic effective masses when you have that warping we discussed earlier in the paper.
Kai: And for those three-fold degenerate cases, they use a Luttinger-Kohn Hamiltonian matrix to describe how the masses behave directionally and how that band structure gets warped.
Mira: That sounds like a lot of complex math, but it’s necessary because it accounts for all those different electronic states existing at once in the same material.
Lev: From an engineering standpoint, if we were trying to build a device with these polarons, we’d need to know how that directional dependence affects the actual energy cost of trapping a charge carrier.
Kai: The paper then analyzes localization lengths in both weak and strong coupling regimes using different wavefunctions depending on whether the electronic bands are degenerate or not.
Mira: For those non-degenerate cases, they use a Gaussian variational wavefunction ansatz to define directional localization lengths, ap d, ap perpendicular d, and ap z.
Lev: And for the degenerate case, it gets more involved because you have to choose between different sets of coefficients for the wavefunction to find the lowest energy state.
Kai: They test this whole setup on twenty different cubic materials—II-VI compounds, III-V compounds, and oxides—which gives us a good range of material examples.
Mira: The results show that for some oxide materials, the localization length is comparable to just the distance between atoms, which suggests that the basic Fröhlich continuum hypothesis might actually break down there.
Lev: That’s a big warning sign; if the continuum assumption fails, our simple models for polaron behavior are going to be fundamentally wrong for those specific materials.
Kai: They also found that perturbation theory can fail when calculating effective masses in certain oxide compounds and they compare that against a Feynman path integral approach.
Mira: That comparison tells us exactly where the perturbative method stops being useful and signals when we need that more complex variational approach instead.
Lev: The discussion shows the two methods agree in the weak coupling regime, but then as you look at stronger coupling or materials near that continuum limit breakdown, the difference between them gets bigger.
Kai: So what they’re really saying is that while perturbation theory works for a while, it’s not enough to get an accurate picture of these polarons in complex real-world materials.
Mira: The main point is that by using this generalized Fröhlich model, we can analyze a much wider range of polarons, including the realistic treatment of effective mass anisotropy and band degeneracy.
Lev: That capability means we can finally predict how a polaron will behave in materials that have these complex symmetries without just guessing.
Kai: And they conclude by comparing the perturbative and variational treatments again, confirming that they are in reasonable agreement when coupling is weak.
Mira: But they highlight that for some oxides, you need to use the more robust Feynman approach if you want to get the right answer about effective masses.
Lev: So the big picture is that for building actual hardware, we have to be careful; we can’t just rely on simple perturbation theory when dealing with strong coupling or complex electronic structures.
The paper's improvements: Kai: So we’re looking at how this study improves the original Fröhlich model by adding those extra layers to handle real cubic materials, specifically dealing with electronic bands that are either degenerate or anisotropic.
Mira: It’s about taking that basic framework and making it more flexible so it can actually describe things like the warping of energy bands and multiple phonon modes without breaking the math.
Lev: For error correction research, that flexibility is huge because it means our simulations aren't stuck in this single, simple regime; we can test how robust these results are under more realistic conditions.
Kai: They introduce a generalized Fröhlich model, which lets them sum over those different electronic bands and couple to multiple phonon branches at once.
Mira: That coupling is important because it gives us a more accurate picture of the polaron binding energy, that ZPR value we talked about earlier.
Lev: And they get expressions for the polaron effective mass in both the weak coupling limit using perturbation theory and then in the strong coupling limit with a variational treatment.
Kai: That lets them see how those two methods compare, which is crucial for knowing if we can trust their results when things get complicated.
Mira: They also give out analytical formulas for non-degenerate cases based on that ratio between in plane and out of plane electronic effective masses, mu star.
Lev: That mu star thing is key because it lets us predict the anisotropic effective masses when you have that warping we discussed earlier in the paper.
Kai: And for the three-fold degenerate case, they use a Luttinger-Kohn Hamiltonian matrix to describe how those masses behave directionally and how that band structure gets warped.
Mira: That sounds like a lot of complex math, but it’s necessary because it accounts for all those different electronic states existing at once in the same material.
Lev: From an engineering standpoint, if we were trying to build a device with these polarons, we’d need to know how that directional dependence affects the actual energy cost of trapping a charge carrier.
Kai: The paper then analyzes localization lengths in both weak and strong coupling regimes using different wavefunctions depending on whether the electronic bands are degenerate or not.
Mira: For those non-degenerate cases, they use a Gaussian variational wavefunction ansatz to define directional localization lengths, ap d, ap perpendicular d, and ap z.
Lev: And for the degenerate case, it gets more involved because you have to choose between different sets of coefficients for the wavefunction to find the lowest energy state.
Kai: They test this whole setup on twenty different cubic materials—II-VI compounds, III-V compounds, and oxides—which gives us a good range of material examples.
Mira: The results show that for some oxide materials, the localization length is comparable to just the distance between atoms, which suggests that the basic Fröhlich continuum hypothesis might actually break down there.
Lev: That’s a big warning sign; if the continuum assumption fails, our simple models for polaron behavior are going to be fundamentally wrong for those specific materials.
Kai: They also found that perturbation theory can fail when calculating effective masses in certain oxide compounds and they compare that against a Feynman path integral approach.
Mira: That comparison tells us exactly where the perturbative method stops being useful and signals when we need that more complex variational approach instead.
Lev: The discussion shows the two methods agree in the weak coupling regime, but then as you look at stronger coupling or materials near that continuum limit breakdown, the difference between them gets bigger.
Kai: So what they’re really saying is that while perturbation theory works for a while, it’s not enough to get an accurate picture of these polarons in complex real-world materials.
Mira: The main point is that by using this generalized Fröhlich model, we can analyze a much wider range of polarons, including the realistic treatment of effective mass anisotropy and band degeneracy.
Lev: That capability means we can finally predict how a polaron will behave in materials that have these complex symmetries without just guessing.
Kai: And they conclude by comparing the perturbative and variational treatments again, confirming that they are in reasonable agreement when coupling is weak.
Mira: But they highlight that for some oxides, you need to use the more robust Feynman approach if you want to get the right answer about effective masses.
Lev: So the big picture is that for building actual hardware, we have to be careful; we can’t just rely on simple perturbation theory when dealing with strong coupling or complex electronic structures.
Kai: This whole paper is really pushing us toward a more sophisticated way of modeling these materials, moving away from the simple isotropic idea to something much more realistic.
Mira: It means that if you're doing condensed matter theory, you need to account for the band structure complexity and the multiple phonon interactions if you want your polaron calculations to be meaningful.
Lev: For error correction hardware, this is about understanding how different directions in a crystal affect charge transport; it dictates how much overhead we have to budget for modeling that anisotropy.
Conclusion: Kai: So we’re wrapping up this look at the paper titled "Fr"ohlich polaron effective mass and localization length in cubic materials: degenerate and anisotropic electronic bands, which essentially gives us a detailed way to model polarons in complex crystalline structures.
Mira: The main implication is that by using this generalized Fröhlich model, we can analyze a much wider range of polarons, including the realistic treatment of effective mass anisotropy and band degeneracy.
Lev: For error correction research, this capability means we can finally predict how a polaron will behave in materials that have these complex symmetries without just guessing.
Kai: It clearly shows where the perturbative approach fails when coupling is strong or when the electronic structure is highly anisotropic, which is super helpful for knowing what to expect from simulations.
Mira: The work confirms that while weak coupling might be simple, you need to use a more robust variational approach if you want an accurate answer about effective masses in those challenging oxide environments.
Lev: From an engineering standpoint, this means when we design hardware, we have to account for how different directions in a crystal affect charge transport; it dictates how much overhead we have to budget for modeling that anisotropy.
Kai: We’ve seen how the paper compares the Feynman path integral and perturbation theory, and they agree in the weak coupling regime but diverge where things get messy.
Mira: It pushes us toward a more nuanced approach when dealing with real materials, acknowledging that simple assumptions about isotropy just don't hold up.
Lev: I think what this tells me is that for any real-world system we build, we can’t rely on one simple model across the board; you need to know the limits of its applicability.
Kai: So this study gives us a solid set of polaron properties for twenty materials, all calculated from first principles using the generalized cubic Fröhlich model.
Mira: It opens up a much bigger picture for condensed matter theory because it lets us handle realistic band warping and multiple phonon environments properly.
Lev: For hardware design, this means we can start predicting performance more accurately when we introduce structural complexity into our models.
Kai: This paper is a great step toward making our theoretical tools more applicable to the kind of real-world materials we’re actually working with in the lab today.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals