First-principles calculations of transport coefficients in Weyl semimetal TaAs

summary

The gist

First-principles calculations of transport coefficients in Weyl semimetal TaAs study charge and heat transport from first-principles in the topological Weyl semimetal TaAs Material Characterization…

In short

This study used first-principles calculations to determine charge and heat transport coefficients in Weyl semimetal TaAs. By solving the Boltzmann Transport Equation using an Iterative Boltzmann Transport Equation (IBTE), researchers found that electrical conductivity matches experimental data, but the Lorenz number deviates significantly from standard values, proving the Wiedemann-Franz law breaks down in this topological material.

Key concepts

Weyl Semimetal
TaAs is a specific type of material with a unique electronic structure featuring Weyl nodes. These nodes are points in momentum space where the energy bands meet, acting like magnetic monopoles for electrons. This topological feature dictates unusual transport properties that differ from conventional metals.
Boltzmann Transport Equation (BTE)
The BTE is a fundamental equation used to describe how charge and heat move through a material under external conditions. The researchers solved this equation to calculate measurable transport coefficients like conductivity and Seebeck coefficient, providing a detailed physical description of the material's behavior.
Iterative Boltzmann Transport Equation (IBTE)
The IBTE is an advanced method used to solve the BTE, offering a more detailed description than simpler approximations. It explicitly includes both electron-phonon scattering (in and out) and allows for calculations in systems that lack time-reversal symmetry, leading to more accurate transport predictions.

Terminology used across episodes

This episode discusses

The paper

First-principles calculations of transport coefficients in Weyl semimetal TaAs · Read on arXiv

Guillaume E. Allemand, Matteo Giantomassi, Matthieu J. Verstraete

University of Liège · Institute of Condensed Matter and Nanosciences, Université Catholique de Louvain · European Theoretical Spectroscopy Facility

We study charge and heat transport from first-principles in the topological Weyl semimetal TaAs. Electron-phonon coupling matrix elements are calculated using density functional perturbation theory and used to derive the thermo-electric transport coefficients, including the electrical conductivity, Seebeck coefficient, electronic thermal conductivity and the Peltier coefficient. We compare the self-energy and momentum relaxation time approximations to the iterative solution of the Boltzmann Transport Equation, finding they give similar results for TaAs provided the chemical potential is treated accurately. For the iterative method, we derive an additional equation, which is needed to fully solve for transport under both thermal and an electrical potential gradients. Interestingly, the Onsager reciprocity between S and Π is no longer imposed, and we can deal with systems breaking time-reversal symmetry, in particular magnetic materials. We compare our results with the available experimental data for TaAs: the agreement is excellent for σ xx, while σ zz is overestimated, probably due to differences in experimental carrier concentrations. The Seebeck coefficient is of the same order of magnitude in theory and experiments, and we find that its low-T behavior also strongly depends on the doping level.

DOI: 10.1103/7lnq-snmp

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "First-principles calculations of transport coefficients in Weyl semimetal TaAs".

Mira: Here's the gist of the paper. First-principles calculations of transport coefficients in Weyl semimetal TaAs study charge and heat transport from first-principles in the topological Weyl semimetal TaAs Material Characterization The study focuses on characterizing the thermoelectric transport properties of TaAs in a fully first-principles way to account for chemical bonding, detailed band dispersion and scattering effects The material TaAs crystallizes in a 4-atom primitive cell with a tetragonal structure (I41md, space group 109), and non-magnetic electronic configuration The electronic band structure calculated along a high symmetry k-path is shown in Figure 1 Two inequivalent nodes are contained in the band structure and TaAs exhibits 24 Weyl nodes in total Transport Coefficient Derivation The transport coefficients are obtained by solving the linearized Boltzmann Transport Equation (BTE) using two approaches: Relaxation-time approximation (RTA) and Iterative Boltzmann Transport Equation (IBTE) The IBTE formalism allows for a detailed description by explicitly including in and out e-ph scattering in the formalism The IBTE framework allows for calculations of electrical conductivity (σ), Seebeck coefficient (S), electronic thermal conductivity (κ el) and Peltier coefficient (Π) Conductivity and Anisotropy Findings The calculated electrical conductivities for TaAs along the x and z directions are shown in Figure 3 The results for conductivity values at room temperature differ by 5% along the x direction and 20% along the z axis, for two successive fine grids (56×56×56 and 64×64×64) The results are in good agreement with both sets of experimental data for the conductivities along the x direction The results for the Seebeck calculations are reported in Figure 4 Our values are of the same order of magnitude as the experimental ones coming from

3: , but the agreement is less quantitative than for σ, in particular for the x direction In a topological Weyl semimetal such as TaAs, the WF “law” can be broken given the non-parabolic and topological electronic structure Our results for Lxx are quite far (up to 70%) from the reference Sommerfeld value L0, especially between 150 and 350 K We present a full first-principles study of the Weyl semimetal TaAs We show that our conductivity calculations are close to the experimental values, whereas the results for Seebeck coefficients are of the same order of magnitude We calculate and show that our electronic thermal conductivities within the IBTE formalism is expressed as κel = 1/T - γomegaNk Xnk(εnk − µ)vnk ⊗ F Tnk!

Kai: - γomegaNk Xnk(εnk − µ)vnk ⊗ F E nk!

Mira: · S The authors acknowledge important and stimulating discussions with JM Lihm about Onsager reciprocity The paper presents a full first-principles study of the Weyl semimetal TaAs The results are presented in Figure 3 and Figure 4 The authors acknowledge funding by ULiege, the Fonds National de la Recherche Scientifique (FRS-FNRS Belgium) for the Excellence of Science (EOS) program (grant 40007563-CONNECT) and F´ed´eration Wallonie Bruxelles for ARC project DREAMS (G.A.

Kai: 21/25-11)> The authors acknowledge funding by ULiege, the Fonds National de la Recherche Scientifique (FRS-FNRS Belgium) for the Excellence of Science (EOS) program (grant 40007563-CONNECT) and F´ed´eration Wallonie Bruxelles for ARC project DREAMS (G.A.

Title and authors: Kai: Moving on to the full title, "First-principles calculations of transport coefficients in Weyl semimetal TaAs," what this really means is they are using first principles to calculate how charge and heat move in this specific topological material.

Mira: It’s about taking that complex material, TaAs, and using fundamental quantum mechanics from the start to figure out its transport behavior without relying on empirical fitting.

Lev: For us on the hardware side, that means we're looking at how much overhead it takes to run these first-principles calculations compared to what you can actually measure in a lab setup.

Kai: The paper covers everything from the band structure and phonon dynamics to deriving all those transport coefficients using methods like the Boltzmann transport equation.

Mira: They use two approaches, so they compare the relaxation-time approximation against an iterative solution of the Boltzmann transport equation to see how much difference it makes.

Lev: That comparison between RTA and IBTE is interesting because if they give similar results for TaAs, it suggests that for this material, maybe a simpler approach might be sufficient for initial estimates.

Kai: The paper also discusses the reciprocity of the off-diagonal Onsager coefficients by comparing the Seebeck and Peltier coefficients to see if they match up.

Mira: And they found that the Wiedemann-Franz relation can be broken strongly for Weyl semimetals such as TaAs in a range of temperature from around one hundred fifty Kelvin to three hundred fifty Kelvin <ref:2505.15522#pg2,that the Wiedemann-Franz relation can be broken strongly for Weyl semimetals>.

Lev: So, the main implication is that you can't just use a simple relation to predict how heat moves versus charge transport in this material; you need the full calculation.

Kai: It really underlines that for topological materials, the underlying electronic structure dictates a breakdown of these conventional transport rules based on temperature.

Mira: Exactly, it’s a crucial signature we can look for when measuring transport properties in these systems.

The paper's summary: Kai: So to summarize the core findings of "First-principles calculations of transport coefficients in Weyl semimetal TaAs," they show that their conductivity calculations are close to experimental values, especially along the x direction.

Mira: But they caution that the results for Seebeck coefficients are only of the same order of magnitude as experimental ones, meaning there's less quantitative agreement there.

Lev: So, if you were designing a sensor based on this material, you’d get a reasonable idea of conductivity but might need to be very careful about predicting the exact voltage response.

Kai: They also calculated the electronic thermal conductivities using the IBTE formalism and showed it’s expressed as kappa el equals one over T minus gamma omega N k X nk epsilon n k minus mu vn k tensor F T nk! minus gamma omega N k X nk epsilon n k minus mu vn k tensor F E nk!.

Mira: That equation shows the thermal conductivity depends on the distribution function and the force, which is a very detailed expression derived from solving that transport equation.

Lev: From an engineering standpoint, seeing that kappa el expressed like that means you can actually calculate how different scattering mechanisms affect heat flow in a material.

Kai: They also show they calculated an appendix detailing the scattering integral Ink of f which includes all possible microscopic scattering events due to electron-phonon and electron-electron interaction, plus ionized impurities and defects.

Mira: That integral is what makes the calculation detailed, because it accounts for "the in and out e-ph scattering," which helps solve the linearized Boltzmann transport equation more accurately.

Lev: Including all those microscopic interactions means you’re not just looking at a single scattering event; you are modeling the full complexity of how particles move through the material.

The paper's improvements: Kai: The authors suggest that one way to improve the study is by comparing the selfenergy and momentum relaxation time approximations to the iterative solution of the Boltzmann transport equation more closely.

Mira: They found that for TaAs, these two approximations give similar results, which is good news because it means you don't need to push for a much more complex formalism just to get comparable results.

Lev: That’s helpful because it tells us that the iterative solution isn't necessary if the chemical potential treatment is accurate enough for this material.

Kai: They also show that they can allow L12 and L21 to be different when using the full IBTE formalism, which is important for systems without time-reversal symmetry.

Mira: That difference means you can do calculations in systems where time-reversal symmetry isn't present, which is a necessary step towards designing more complex electronic devices.

Lev: So, this opens up possibilities for studying non-trivial physics where those coefficients might actually differ, which is what we need for advanced device design.

Kai: In terms of future work, they suggest exploring how to push beyond the current limitations when it comes to accurately predicting the thermoelectric transport coefficients at different temperatures.

Mira: They also acknowledge that their results for Lxx are quite far from the reference Sommerfeld value L0, especially between one hundred fifty Kelvin and three hundred fifty Kelvin <ref:2505.15522#pg2>.

Conclusion: Kai: So, wrapping up the paper "First-principles calculations of transport coefficients in Weyl semimetal TaAs," they show that their conductivity calculations are close to experimental values for the x direction.

Mira: But they also note that while the results for Seebeck coefficients are of the same order of magnitude as experimental ones, there's less quantitative agreement compared to what was achieved for conductivity.

Lev: So, in short, they give us solid numbers for transport but a bit of a warning on how far off we might be on the thermoelectric response.

Kai: The main thing is that this study confirms the electrical conductivity calculations are close to experimental data along the x direction.

Mira: And it also confirms that this paper shows that our Lorenz number Lxx are quite far from the reference Sommerfeld value L0 between one hundred fifty Kelvin and three hundred fifty Kelvin <ref:2505.15522#pg2>.

Lev: That large deviation means we can't just assume the Wiedemann-Franz relation is valid in that temperature range for these Weyl semimetals; it’s a big limitation for simple predictions.

Kai: The full study of "First-principles calculations of transport coefficients in Weyl semimetal TaAs" gives us a full first-principles look at this material.

Mira: It’s about getting detailed results on charge and heat transport while explicitly accounting for chemical bonding and scattering effects.

Lev: And the paper also shows that the electronic thermal conductivities within the IBTE formalism is expressed as kappa el equals one over T minus gamma omega N k X nk epsilon n k minus mu vn k tensor F T nk! minus gamma omega N k X nk epsilon n k minus mu vn k tensor F E nk!.

Kai: That specific expression for thermal conductivity is a key result derived from solving the Boltzmann transport equation.

Mira: It’s a detailed way to calculate how different scattering mechanisms affect heat flow in this material.

More episodes

← Home