Ferroelectric nematic liquid crystals: temperature-tunable electrocaloric fluids with large strength at low fields
summary
The gist
The paper presents the first direct measurements of electrocaloric temperature change in ferroelectric nematic liquid crystals…
In short
The study measured electrocaloric temperature change in ferroelectric nematic liquid crystals (FNLCs) using both direct and indirect methods. The results show these materials have very large electrocaloric strengths near room temperature, with FNLC-919 achieving a strength of 4.89 K μm V-1. The tunability of their phase transition temperatures suggests potential for novel, low-field electrocaloric devices.
Key concepts
- Electrocaloric Effect (EC)
- The EC effect is the temperature change that occurs in a material when an external electric field is applied or removed. This paper investigates how ferroelectric nematic liquid crystals respond to electric fields, aiming to use them as fluids for cooling or heating devices.
- Ferroelectric Nematic Liquid Crystals (FNLCs)
- These are specific liquid crystal mixtures with a phase sequence that includes ferroelectric and apolar nematic phases. Their key feature is the ability to tune their phase transition temperatures between 0°C and 100°C, offering flexibility in material design.
- EC Strength
- EC strength measures how effectively a material converts electrical energy into temperature changes. The calculated strengths for FNLC-919 and FNLC-346 are notably large near room temperature, indicating high potential for efficient electrocaloric applications.
Terminology used across episodes
This episode discusses
- Ferroelectric nematic liquid crystals: temperature-tunable electrocaloric fluids with large strength at low fields · Paper Radio
The paper
Ferroelectric nematic liquid crystals: temperature-tunable electrocaloric fluids with large strength at low fields · Read on arXiv
Diana I. Nikolova, Rachel Tuffin, Mengfan Guo, Neil D. Mathur, Xavier Moya, Peter Tipping, Richard J. Mandle, Helen F. Gleeson
School of Physics and Astronomy, University of Leeds School of Chemistry, University of Cambridge Merck Electronics KGaA
The electrocaloric (EC) effect offers a promising energy-efficient and clean cooling technology. We present the first direct measurements of EC temperature change in a new family of EC fluids, ferroelectric nematic liquid crystals (FNLCs), demonstrating in two such materials temperature jumps of ΔT j 0.2 K for field changes as low as ΔE 0.1 V μm-1. Indirect measurements of adiabatic temperature change ΔT confirm that these direct measurements are an underestimate and that ΔE = 2 V μm-1 can induce up to ΔT 1.6 K, yielding EC strengths ΔT/ΔE up to 100% higher than incumbent materials. For temperature spans of 5-10 K, we predict a coefficient of performance of 21-40. We find ΔT 1 K for >100 FNLCs that collectively span all temperatures between 0 C and 100 C. This, together with the new device concepts conceivable with fluid EC materials, offers huge potential for cooling applications.
DOI: 10.1038/s44435-026-00019-0
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Ferroelectric nematic liquid crystals".
Mira: Here's the gist of the paper. The paper presents the first direct measurements of electrocaloric temperature change in ferroelectric nematic liquid crystals, demonstrating their potential in EC devices and applications This work shows that these materials exhibit very large EC strengths near room temperature Material Characterization The study focuses on two specific liquid crystal mixtures, FNLC-919 and FNLC-346, which possess the phase sequence of ferroelectric nematic (Nf), intermediate (Nx), apolar nematic (N), and isotropic (I) phases Both materials are provided by Merck Electronics KGaA, Darmstadt, Germany The phase transition temperatures for these mixtures were obtained via differential scanning calorimetry (DSC) Measurement Approaches The researchers employed both direct and indirect methods to evaluate the electrocaloric effect Direct measurements involve measuring the temperature jumps ΔTj upon application of an electric field at a set temperature Ts These direct measurements are performed in electroporation cuvettes with an electrode gap of 1mm The applied voltage was limited in this experimental arrangement, constraining the maximum the applied field to 0.1 V μm-1 The direct values are expected to be an underestimate of the actual temperature change due to the presence of inactive thermal mass Indirect measurements utilize polarization and entropy changes to infer the EC temperature change ΔT via the Maxwell method The indirect Maxwell method is given by ΔT = −Ts/c ∫ (∂P/∂T) E dE/E squared E1 EC Strength and Performance The EC strength, calculated as ΔT/ΔE, exhibits remarkable performance for these materials The largest EC strength deduced from the indirect method is 4.89 K μm V-1 for FNLC-919 and 3.40 K μm V-1 for FNLC-346 The temperature range over which at least 50% of the maximum ΔT can be achieved gives a further indication of the practical applicability of these materials in EC systems, and this range is 2.5 K for both materials The predicted COP values for temperature spans of 5-10 K in ferroelectric nematic liquid crystals are as high as 21-40 Tunability and Potential The tunability of the phase transition temperatures allows the ferroelectric to paraelectric transition to be engineered at any desired temperature between 0˚C and 100˚C This tunability offers huge flexibility in terms of potential applications The liquid nature of the ferroelectric nematic materials would allow them to be used as the regenerative fluid in a system, allowing one to conceptualise completely new approaches to EC system design The heating and cooling cycles in the FNLCs were extremely symmetric In this work, we have shown the first direct measurements of the EC effect in ferroelectric nematic liquid crystals Two materials were considered in detail, both of which exhibit very large EC strengths near room temperature The electric fields at which the measurements were made are an order of magnitude lower than in solid-state systems The ability to tune the phase transition temperatures of liquid crystals has long been important in designing materials for liquid crystal devices The indirect measurements of EC temperature change ΔT predicted a larger temperature change than was directly measured in both materials By minimizing the latter, the technique can be improved and better agreement with the indirect prediction can be achieved The EC effect is achieved in FNLCs with very low electric fields, and over a temperature range where at least 50% of the maximum ΔT is maintained over a temperature range of 2.
Paper summary: Kai: So we're wrapping up this look at these ferroelectric nematic liquid crystals and their electrocaloric effect.
Mira: The title really tells you what they did here, focusing on how you can tune the temperature of these materials and they managed to get a very high strength even when using low electric fields.
Lev: It’s about showing that even though we're dealing with liquid crystals, these specific mixtures have this potential for large temperature changes right at room temperature.
Kai: They did show the first direct measurements of this effect in these materials, and they found that FNLC-nine hundred nineteen and FNLC-three hundred forty-six both show very strong electrocaloric strengths near room temperature.
Mira: The authors are pointing out that the tunability of those phase transition temperatures between zero degrees Celsius and one hundred degrees Celsius is a big deal for designers.
Lev: That tunability means you can engineer the operating temperature range for these systems, which gives you a lot more flexibility in how you use them than fixed materials would allow.
Kai: They’ve shown that this material's liquid nature could let it be used as both the active part and the fluid moving heat around in a system.
Mira: It suggests completely new ways to conceptualize electrocaloric cooling devices that don't rely on traditional solid-state components for both functions.
Lev: It makes you wonder how much overhead real hardware, like error correction, would land on if you tried to run these kinds of systems for actual cooling applications.
Kai: We’ll be looking at how this low field requirement compares to what we usually see in solid-state systems next.
Conclusion: Kai: So, this paper is about these ferroelectric nematic liquid crystals and how you can tune their temperature to get a big electrocaloric effect even with very small electric fields.
Mira: The title really hits on the main idea here: tuning those temperature transitions for large strength at low fields. It’s about engineering the material itself for cooling.
Kai: They did show direct measurements of this effect in two specific mixtures, FNLC-nine hundred nineteen and FNLC-three hundred forty-six both of which have these strong characteristics near room temperature.
Mira: And that tunability they found—engineering the phase transition temperatures between zero degrees Celsius and one hundred degrees Celsius—that’s a huge design advantage. It means you can tailor the material properties for specific tasks.
Kai: They showed that this liquid nature could let these materials act as both the active component and the fluid moving heat around in a system.
Mira: It suggests completely new ways to think about electrocaloric cooling devices, moving away from traditional solid-state setups where you need separate components for heating and cooling.
Kai: The implications are that if we can achieve these performance metrics with such low fields and high tunability, there's a path for developing novel electrocaloric systems operating in regimes we haven't explored before.
Mira: It confirms that these ferroelectric nematic liquid crystals are promising candidates for energy-efficient cooling technology, provided we can handle the complexity of their phase transitions and measurements.
Kai: We’ll be looking next at how this low field requirement compares to what we usually see in solid-state systems.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals