Fast Lithium Ion Diffusion in Brownmillerite Li x Sr 2 Co 2 O 5

summary

The gist

Fast Lithium Ion Diffusion in Brownmillerite Li x Sr 2 Co 2 O 5 shows that migration barriers of lithium ion are as small as 0.28 ∼ 0.17 eV depending on the lithium concentration rates The room…

In short

The study investigated fast lithium ion diffusion in brownmillerite Li x Sr2Co2O5, finding migration barriers as low as 0.17 eV depending on lithium concentration rates. This material exhibits high ionic diffusivity and conductivity, outperforming many other solid-state electrolytes. The work confirms oxygen vacancy channels facilitate this fast transport, suggesting Li x Sr2Co2O5 is a promising super-ionic conductor for batteries.

Key concepts

Brownmillerite Structure
This is a specific crystal structure of Sr2Co2O5 where the arrangement of atoms forms ordered oxygen vacancy channels. These channels are crucial because they provide well-defined pathways for lithium ions to move through the material quickly, which is key for fast battery performance.
Migration Barrier
This represents the energy hurdle a lithium ion must overcome to hop from one site to an adjacent site within the crystal structure. The paper found these barriers are very low (0.17–0.28 eV), meaning lithium ions can move easily, leading to high ionic conductivity.
Oxygen Vacancy Channels
These are ordered pathways formed by missing oxygen atoms in the brownmillerite lattice. These channels act like highways for lithium ions, allowing them to diffuse rapidly along a specific direction (h110bar), significantly enhancing the material's ability to conduct electricity ionically.

Terminology used across episodes

This episode discusses

The paper

Fast Lithium Ion Diffusion in Brownmillerite Li x Sr 2 Co 2 O 5 · Read on arXiv

Xin Chen, Xixiang Zhang, Jie-Xiang Yu, *Jiadong Zang†

School of Physical Science and Technology, Soochow University · Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST) · Department of Physics and Astronomy, University of New Hampshire

Ionic conductors have great potential for interesting tunable physical properties via ionic liquid gating and novel energy storage applications such as all-solid-state lithium batteries. In particular, low migration barriers and high hopping attempt frequency are the keys to achieve fast ion diffusion in solids. Taking advantage of the oxygen-vacancy channel in Li x Sr 2 Co 2 O 5, we show that migration barriers of lithium ion are as small as 0.28 0.17eV depending on the lithium concentration rates. Our first-principles calculation also investigated hopping attempt frequency and concluded the room temperature ionic diffusivity and ion conductivity is high as 10-7 about 10-6 cm squared s-1 and 10-3 about 10-2 S times cm-1 respectively, which outperform most of perovskite-type, garnet-type and sulfide Li-ion solid-state electrolytes. This work proves Li x Sr 2 Co 2 O 5 as a promising super-ionic conductor.

DOI: 10.1063/5.0253344

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Fast Lithium Ion Diffusion in Brownmillerite Li x Sr 2 Co 2 O 5".

Mira: Here's the gist of the paper. Fast Lithium Ion Diffusion in Brownmillerite Li x Sr 2 Co 2 O 5 shows that migration barriers of lithium ion are as small as 0.28 ∼ 0.17 eV depending on the lithium concentration rates The room temperature ionic diffusivity and ion conductivity is high as 10−7 ∼ 10−6 cm2 s−1 and 10−3 ∼ 10−2 S · cm−1 respectively, which outperform most of perovskite-type, garnet-type and sulfide Li-ion solid-state electrolytes This work proves LixSr2Co2O5 as a promising super-ionic conductor.

Kai: Structural Confirmation of Channels The study confirmed the oxygen vacancy channels in brownmillerite Sr2Co2O5 The well-ordered and controllable oxygen-vacancy channels in brownmillerite Sr2Co2O5 provide favorable conditions for fast ionic diffusion and storage of ions.

Mira: In the unit cell of (Sr2Co2O5)4 under G-AF ordering, periodic oxygen-vacancy channel structures are formed along the h110¯i direction so that they can provide two well-ordered diffusion channels per unit cell marked in Fig.

Kai: 1(b).

Title and authors: Kai: So we're looking at this paper called "Fast Lithium Ion Diffusion in Brownmillerite Li x Sr two Co two O five" <ref:2402.17557#pg2>. Mira, what's the main takeaway from the title itself?

Mira: The title just points to something really specific, which is fast lithium ion diffusion happening in a material called brownmillerite lithium strontium cobalt oxide. It suggests they found a way for these ions to move quickly there.

Lev: I wonder how fast we're talking about? Because if it's just slow hopping, it doesn't help us much with batteries.

Kai: Well, the paper claims they found migration barriers as small as zero point two eight eV and down to zero point one seven eV depending on how you introduce the lithium concentration rates <ref:2402.17557#pg1,as small as 0.28>. That's a very low number for a solid electrolyte, Mira.

Mira: It implies that the way you put in those lithium ions really controls how easy it is for them to move through the crystal structure of that brownmillerite material. It's not just one fixed barrier; it depends on how fast you inject the ions into the system.

Lev: If we have a variable barrier based on concentration rates, that opens up some interesting design space, but I need to know if this speed is relevant for real hardware, or if we're talking about very slow insertion kinetics.

The paper's summary: Kai: So the paper summarizes their findings by showing that the room temperature ionic diffusivity can be as high as one point zero two times ten to the minus seven square centimeters per second and conductivity up to one point one seven times ten to the minus two Siemens per centimeter.

Mira: That's quite a jump compared to what we see in many perovskite or garnet types of solid electrolytes, which is what they're comparing this brownmillerite material against. It suggests this structure has real potential for high ionic transport.

Lev: But I need to know the assumptions behind those numbers. Are they using an adiabatic approximation? Because if so, that’s a big assumption when you’re looking at hopping frequencies and barriers like these.

Kai: They state they used the Vogele Tammanne Fulcher model to get those diffusivities, and they explicitly mention that these estimates are based on assuming diffusion over each energy barrier is adiabatic, meaning the mechanical energy of the migrating lithium ion is conserved from start to finish.

Mira: That assumption is key, because if you ignore that conservation of mechanical energy, the calculated high conductivity might not translate to what we actually measure in a battery cell. But they also point out that for Li0 point seven five strontium two cobalt zero oxide five, the barrier for the entire path is just zero point one seven eV.

Lev: zero point one seven eV is low enough to be comparable to hydrogen ion diffusion in protonated strontium two cobalt zero oxide five, which they estimate to be around zero point three eV. That comparison suggests this material's transport mechanism is similar to some other known conductors, which is good context.

The paper's improvements: Kai: The authors are suggesting that by looking at the structural details, specifically the oxygen vacancy channels along the h one-one zero bar direction in brownmillerite strontium two cobalt zero oxide five, they can optimize things for fast diffusion.

Mira: They confirm that this structure provides these well-ordered and controllable oxygen vacancy channels which set up favorable conditions for both fast ionic diffusion and storing those ions. It’s a structural feature they are leaning on heavily.

Lev: So the improvement isn't just finding a low barrier; it's confirming that the material has these predictable, periodic pathways for the ions to follow, which is what you need for reliable engineering of transport properties.

Kai: Exactly. They calculated the lattice constant for an orthorhombic unit cell of four strontium two cobalt zero oxide five as five point five seven angstrom, b equals five point four six angstrom, and c equals sixteen point zero zero angstrom. Those dimensions define the space where this channel structure exists.

Mira: And they are also showing how lithium injection doesn't mess with the spin ordering or the insulating property. They find that even with lithium present, the antiferromagnetic ordering stays there, and it maintains its insulating character because of those multi-valent cobalt cations.

Lev: That’s a nice result because it means we don't have to worry about structural collapse or magnetic changes when we start filling these channels with lithium ions for battery applications. That keeps the performance predictable.

Conclusion: Kai: So, to wrap up this paper on "Fast Lithium Ion Diffusion in Brownmillerite Li x Sr two Co two O five", they are concluding that this material is a promising super-ionic conductor because of its high ionic diffusivity and conductivity <ref:2402.17557#pg2>.

Mira: They argue that because the brownmillerite structure is similar to perovskite type, this material inherits advantages like high lithium ion conductivity and low electron conductivity, plus it has a wide electrochemical window.

Lev: The crucial point they make about stability is that because lithium exclusively occupies those oxygen vacancy channels in this specific composition, it can address the problem of poor stability against lithium metal that some perovskite-type solid electrolytes face.

Kai: So the big picture here is they're proposing that brownmillerite strontium two cobalt zero oxide five could be compatible with using perovskite type solid electrolytes in all-solid-state lithium batteries. It’s about using this structure to solve a known stability issue.

Mira: Yeah, it shows that tailoring the structure to have these specific channels can lead to better ion transport and better stability when you use lithium metal anodes. We're looking forward to seeing how this translates into actual cell performance in the next steps.

Lev: From my side, I just think if we can reliably control those migration barriers by tuning concentration rates, as they did here from zero point two eight eV down to zero point one seven eV, that gives us a pathway for designing electrolytes with precisely tailored kinetics for specific battery needs and hopefully better cycle life in the long run <ref:2402.17557#pg1>.

Kai: Right, so we're looking at how controlling the lithium concentration rates can tune the ion movement in brownmillerite strontium two cobalt zero oxide five to get those high room temperature values. That’s what this paper is all about.

Mira: Yeah, it points toward a material where structural control over the oxygen vacancy channels leads to good ionic conductivity and stability when dealing with lithium metal anodes.

Lev: And that's the bridge we need to build for real battery design, moving from theoretical potential to something we can actually build in a cell.

More episodes

← Home