Electron--phonon matrix elements for hybrid functionals in the projector augmented-wave method: Eigenvalue projection, nondiagonal supercells, and Wannier interpolation
summary
The gist
Electron–phonon matrix elements from eigenvalue projection within the projector augmented-wave method provides an all-electron matrix element from only eigenvalues and wave functions of displaced…
In short
This method calculates electron-phonon matrix elements from eigenvalue projection within PAW calculations, avoiding potential derivatives. It uses displaced calculations and nondiagonal supercells to recover full matrix elements via crystal symmetry, achieving low mean absolute errors across seven materials. This approach is efficient and applicable to beyond-DFT methods like hybrid functionals.
Key concepts
- Eigenvalue Projection
- This technique reconstructs the full electron-phonon matrix element by using only the eigenvalues and wave functions from displaced calculations. It avoids needing derivatives of local potentials or PAW strengths, simplifying the calculation process significantly.
- Nondiagonal Supercells
- These supercells are used to sample the Brillouin zone in a way that is equivalent to a primitive cell but requires far fewer atoms. This drastically reduces computational cost by up to 23 times compared to diagonal supercells, making the method feasible for larger systems.
- All-Electron Matrix Element in PAW
- The paper combines spectral terms derived from displaced Hamiltonian matrices with analytic terms built from PAW data. This combination yields the complete all-electron matrix element, ensuring accuracy comparable to VASP+phelel calculations.
- Symmetry Recovery
- Matrix elements calculated at non-equivalent k and q points are mathematically transformed using space-group operations. This ensures that the final recovered matrix elements represent the full crystal symmetry, allowing for accurate transport and superconductivity calculations.
Terminology used across episodes
This episode discusses
- Electron--phonon matrix elements for hybrid functionals in the projector augmented-wave method: Eigenvalue projection, nondiagonal supercells, and Wannier interpolation · Paper Radio
- EPW-VASP interface for first-principles calculations of electron-phonon interactions
The paper
Electron--phonon matrix elements for hybrid functionals in the projector augmented-wave method: Eigenvalue projection, nondiagonal supercells, and Wannier interpolation · Read on arXiv
Key Laboratory of Material Simulation Methods and Software of Jilin University · State Key Laboratory of High Pressure and Superhard Materials at Jilin University · Key Laboratory of Physics and Technology for Advanced Batteries at Jilin University · International Center of Future Science at Jilin University
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Electron--phonon matrix elements for hybrid functionals in the projector augmented-wave method".
Mira: Here's the gist of the paper. Electron–phonon matrix elements from eigenvalue projection within the projector augmented-wave method provides an all-electron matrix element from only eigenvalues and wave functions of displaced calculations without needing derivatives of local potential or PAW strengths The method combines eigenvalue projection with nondiagonal supercells to recover full matrix elements by crystal symmetry, achieving mean absolute errors below 0.5 meV for seven materials The approach extends the eigenvalue-projectability method to PAW by reconstructing the displaced Hamiltonian from displaced eigenvalues and overlaps evaluated in the PAW metric of each displaced structure This involves defining generalized overlaps, where the overlap operator depends on the atomic positions, requiring overlaps to be taken in the metric of the displaced structure The projected pseudo-Hamiltonian is obtained as
Hx: mn = ⟨ψ˜mk′ H˜xψ˜nk⟩, where Ex is diagonal with entries εx j All-Electron Matrix Element in PAW The all-electron matrix element gκα is obtained by combining the spectral term gHκα with analytic terms constructed from the PAW dataset The spectral term is derived from central differences of the matrices Hx of Eq.
Kai: (7) for displacements ±δ, with the lattice sum in ∂κα,q evaluated in commensurate supercells The analytic terms are defined using projector coefficients and partial-wave matrix (Rκα), which are constructed from PAW data Role of Nondiagonal Supercells The method is combined with nondiagonal supercells that sample the Brillouin zone equivalently to the primitive cell and recover the full matrix elements by crystal symmetry The nondiagonal route reduces the cost of displaced calculations by up to a factor of 23 Nondiagonal supercells are used to accommodate the same q points with far fewer primitive cells, and they ensure that each supercell samples the electronic Brillouin zone equivalently to the primitive cell Validation and Application The method was validated for seven materials, including metals, semiconductors, and a high-pressure hydride CaH6 NC matrix elements agree with QE DFPT to MAEs of 0.0078–0.28 meV, and the PAW matrix elements agree with VASP+phelel to MAEs of 0.0052–0.40 meV The nondiagonal route makes a q mesh accessible that would otherwise require a diagonal supercell of 3584 atoms for CaH6 Cost Reduction and Efficiency The cost of the diagonal route has two sources, and the SCF calculations of the large supercells dominate it The nondiagonal route reduces core-hours by factors of 1.7–23 The smaller nondiagonal supercells matter even more for beyond-DFT methods like hybrid functionals The method can be combined with hybrid functionals and other beyond-DFT methods available in PAW, for which the smaller nondiagonal supercells are particularly valuable Application to CaH6 For CaH6, diagonal and nondiagonal supercells give the same λ and Tc The calculation gives λ = 3.079, a logarithmic average frequency ωlog = 79 meV compared with 86 meV on the 53 q mesh, and Tc = 251 K The nondiagonal route makes a finer q mesh accessible for CaH6 Symmetry Recovery Matrix elements computed at symmetry-inequivalent (k, q) are transported to the full mesh with space-group operations, and the sewing matrices (W)mn are unitary within band sets that contain complete degenerate multiplets The recovered matrix elements are g tκα = Xκ′β D∗κα,κ′β W′g sκ′β(σ) W†, as derived in Appendix C Comparison with DFPT and VASP+phelel The comparison with VASP+phelel tests the evaluation of gH by eigenvalue projection against its evaluation from potential derivatives within this common formulation The agreement shows that the generalized overlaps and the analytic terms of Eq.
Mira: (17) reproduce the all-electron PAW matrix element of VASP+phelel The comparison with DFPT tests it against an independent method We have extended eigenvalue projection for electron–phonon matrix elements to the PAW method With generalized overlaps in the PAW metric of each displaced structure and analytic terms constructed from the PAW dataset, the all-electron matrix element is obtained from the eigenvalues and pseudo wave functions of the displaced calculations alone without derivatives of local potential or of the PAW strengths We further combined the method with nondiagonal supercells to recover full matrix elements by crystal symmetry For seven materials, the NC matrix elements agree with QE DFPT to MAEs of 0.0078–0.28 meV, and the PAW matrix elements agree with VASP+phelel to MAEs of 0.0052–0.40 meV The nondiagonal route reproduces the diagonal-supercell results to MAEs of at most 0.072 meV, while reducing the aggregate DFT cost of the displaced calculations by factors of 1.7–23 For CaH6, diagonal and nondiagonal supercells give the same λ and Tc The method can be combined with hybrid functionals and other beyond-DFT methods available in PAW, for which the smaller nondiagonal supercells are particularly valuable Appendix Details The generalized overlap of Eq.
Kai: (6) is Ux(j, n) = U PWx(j, n) + X lκµη Π¯ x lκµ(Ψ˜ x j)∗ (Qκ)µη Π¯ x lκη(ψ˜ (p) nk) The analytic PAW terms are formed from C̄ and D̄ and multiplied by e−2πi(k′−k)·τ κ The symmetry transformation of the matrix elements is given by P a Dab g t a = W′(g s b) (σ)W† The plane-wave evaluation of the overlaps and completeness relation are detailed in Appendix A The analytic PAW terms are given in Appendix B The symmetry transformation of the matrix elements is given in Appendix C Computational Workflow The implementation in ARES-EPC involves preprocessing, external DFT calculations, and postprocessing steps Preprocessing writes the inputs of the supercell calculations, and postprocessing reads their output The two paths meet in the projection onto phonon modes This workflow is shared between NC and PAW calculations Results Summary The diagonal and nondiagonal ARES-EPC+VASP calculations use the same k and q meshes for each material The group-norm MAEs range from 0.0079 to 0.072 meV, with the largest value for GaAs [Fig.
Paper summary: Kai: So looking at the paper "Electron--phonon matrix elements for hybrid functionals in the projector augmented-wave method: Eigenvalue projection, nondiagonal supercells, and Wannier interpolation", we see they've put together a way to get those electron phonon matrix elements using just eigenvalues and wave functions from displaced calculations.
Mira: The title itself tells you a lot about what they are trying to do—it involves eigenvalue projection, nondiagonal supercells, and wannier interpolation, all within the projector augmented-wave method.
Lev: Basically, the authors claim that by using generalized overlaps in the paw metric of each displaced structure and analytic terms constructed from the paw dataset, they can get an all-electron matrix element without needing derivatives of local potential or those paw strengths.
Kai: That’s a significant statement because it means you can compute these matrix elements using only eigenvalues and pseudo wave functions from the displaced calculations alone.
Mira: It's useful for anyone who needs electron phonon coupling but doesn't want to deal with those extra derivative calculations every time they run things.
Lev: And they showed that this works when compared against vasp plus phelel, meaning their generalized overlaps and analytic terms reproduce the all-electron paw matrix element of vasp plus phelel.
Kai: The results are pretty solid for seven materials, showing mean absolute errors below zero point five milli-electron volts for nc matrix elements and zero point oh five two to zero point four milli-electron volts for PAW matrix elements.
Mira: So the overall implication is that this method offers a way to access electron phonon coupling calculations at any level of theory available in paw codes.
Lev: The nondiagonal route, which uses supercells, reduces the aggregate dfpt cost by factors of one point seven to twenty-three for these displaced calculations.
Kai: And for materials like calcium hydride, both diagonal and nondiagonal supercells give the same lambda and t c values, with lambda equal to three point zero seven nine and omega log equal to seventy nine milli-electron volts.
Mira: The method can be combined with hybrid functionals and other beyond dfpt methods available in paw, which is where the smaller nondiagonal supercells are especially valuable.
Lev: So it’s a solid framework that offers computational savings while maintaining high accuracy for these important calculations.
Conclusion: Kai: So we're wrapping up this look at this paper by discussing electron phonon matrix elements for hybrid functionals using eigenvalue projection and nondiagonal supercells in the projector augmented wave method.
Mira: Yeah, the title tells you it’s about getting those coupling terms without needing messy derivatives of the local potential or any of those PAW strengths themselves.
Lev: From where I sit building real hardware, that sounds like a big win because it means we don't have to re-calculate everything just to get one new electron phonon matrix element.
Kai: Right, so they are using only the eigenvalues and pseudo wave functions from these displaced calculations to reconstruct the full all-electron matrix element.
Mira: And they do that by combining those displaced overlaps with analytic terms built directly from the projector augmented wave data set. That’s a clever way to bridge what we know and what we're calculating on the fly.
Lev: I see how it works conceptually, but I wonder how much overhead that nondiagonal supercell approach adds to a practical calculation run on actual hardware.
Kai: Well, the paper shows it actually reduces the core hours for those displaced calculations by factors of one point seven to twenty-three depending on what you're doing.
Mira: That cost reduction is significant, especially when you consider that these smaller supercells are useful for other things like hybrid functionals where we need those smaller atomic environments.
Lev: So it’s not just a theoretical shortcut; it’s actually making the workflow more efficient for things beyond standard density functional theory calculations.
Kai: And for materials like calcium hydride, they found that both the diagonal and nondiagonal supercells gave them the same lambda and temperature values, which is a nice consistency check.
Mira: It also shows that this method can be combined with other advanced methods available in the projector augmented wave framework, like hybrid functionals.
Lev: So it’s a framework that lets you use these displaced calculations to access coupling information across different levels of theory without needing those expensive derivative steps every time.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals