Diffusion in a d-dimensional rough potential
summary
The gist
The prediction of diffusion in solids is necessary to understand the microstructure evolution in materials out of equilibrium This work develops an analytical model for diffusivity in a noisy solid…
In short
This work develops an analytical model for diffusivity in noisy solid solutions using mean first passage time analysis. The model shows that surface roughness always decreases diffusivity, supporting sluggish diffusion theories observed in concentrated alloys.
Key concepts
- Fundamental Modeling of Transport
- Accurately modeling diffusion is crucial for understanding microstructure changes in materials out of equilibrium, such as radiation-induced segregation or sintering. In pure solids, transport is often modeled using harmonic transition state theory (HTST), estimating the hopping rate based on an energy barrier.
- Dimensionality Dependence and Analytical Expression
- The authors create an analytical expression for diffusivity in $d$ dimensions on a lattice with normally distributed energy barriers, consistent with Zwanzig's work for $d ext{ } ext{ } ext{ } ext{ } ext{ } heta ext{ } d heta = 2$. This model is valid for $d=2$ but not for $d>2$, assuming saddle point and initial energies are independent normal random variables.
- Mean First Passage Time Analysis
- In the limit of infinite dimensions ($N ightarrow ext{ } ext{ } ext{ } ext{ } heta$), the characteristic rate along a path is the harmonic mean of hopping rates. This leads to an effective barrier ($eta_{ ext{eff}}$) and an effective hopping rate ($ ilde{ u}$) that describe the overall transport behavior.
Terminology used across episodes
This episode discusses
- Diffusion in a d-dimensional rough potential · Paper Radio
- Quenched trap model on the extreme landscape: the rise of sub-diffusion and non-Gaussian diffusion
The paper
Diffusion in a d-dimensional rough potential · Read on arXiv
Jacob Jeffries, Emilio Mendoza Reyes, Fadi Abdeljawad, Murray Daw, Enrique Martinez
Department of Materials Science and Engineering, Clemson University · School of Computing, Clemson University · Department of Materials Science and Engineering, Lehigh University · Department of Physics and Astronomy, Clemson University · Department of Mechanical Engineering, Clemson University
The prediction of diffusion in solids is necessary to understand the microstructure evolution in materials out of equilibrium. Although one can reasonably predict diffusive transport coefficients using atomistic methods, these approaches can be very computationally expensive. In this work, we develop an analytical model for the diffusivity in a noisy solid solution in an arbitrary number of dimensions (d) using a mean first passage time analysis. We observe that roughness always decreases the diffusivity, aligning with sluggish diffusion theories in concentrated alloys, finding that an increase in diffusivity induced by alloying elements must be due to a decrease in the average activation energy, not to the noise. These analytical results are then compared with kinetic Monte Carlo simulations, which are in good quantitative agreement with the simulation data for d at most 5, and excellent quantitative agreement for d at most 3. This generalization to arbitrary dimensions has been elusive to the community since Zwanzig [PNAS, 85, 2029 (1988)] published his seminal work on 1-dimensional systems.
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Diffusion in a d-dimensional rough potential".
Mira: Here's the gist of the paper. The prediction of diffusion in solids is necessary to understand the microstructure evolution in materials out of equilibrium This work develops an analytical model for diffusivity in a noisy solid solution using mean first passage time analysis The analytical results show that roughness always decreases the diffusivity, aligning with sluggish diffusion theories in concentrated alloys Fundamental Modeling of Transport Accurately modeling diffusion in solids is paramount to fundamentally understand the microstructure evolution in materials out of equilibrium In a homogeneous pure solid, transport coefficients are often modeled using harmonic transition state theory (HTST) The hopping rate over an energy barrier is estimated by HTST as R = ν exp (−β∆E).
Kai: For multi-component solid solutions, the activation energy for a diffusive hop depends on local chemistry, varying across the system.
Mira: Dimensionality Dependence and Analytical Expression The authors develop an analytical expression for diffusivity in d dimensions on a lattice with normally distributed energy barriers consistent with Zwanzig’s expression for d ≤ 5 This expression is valid for d = 2, but not d > 2.
Kai: The model assumes that the saddle point and initial energies can be modeled as independently distributed random variables with normal distributions The hopping rates are then modeled by a lognormal distribution L(−βµ, 2β2σ2).
Paper summary: Kai: To recap what we just heard, we talked about the paper Diffusion in a d-dimensional rough potential and how they use mean first passage time analysis to model noise effects on diffusivity.
Mira: They claim that roughness always decreases the diffusivity, which is consistent with sluggish diffusion theories in concentrated alloys. The authors develop an analytical expression for this diffusivity in an arbitrary number of dimensions d using mean first passage time analysis.
Lev: The core of their method relies on modeling the saddle and initial energies as independently distributed normal variables, which then leads to a lognormal distribution for the hopping rates.
Kai: They then use the harmonic mean of these rates to find a characteristic rate, reff, which is essentially nu exp minus mu with two times sigma squared.
Mira: And they show that this work provides an analytical expression for diffusivity in d dimensions, but they explicitly state that this expression is only valid for d equals two and not for d greater than two <ref:2508.04674#pg1>.
Conclusion: Kai: So, to wrap up the discussion on Diffusion in a d-dimensional rough potential, the authors developed a mean first passage time analysis to get an analytical model for diffusivity in noisy solid solutions.
Mira: The main implication we see is that roughness always decreases the diffusivity under these conditions, which aligns with sluggish diffusion theories. They also found that increasing dimensionality enhances the diffusivity due to extra percolation pathways.
Lev: From a practical standpoint, their work gives researchers a way to get faster estimates for diffusivities compared to running expensive atomistic simulations like kinetic Monte Carlo when you are dealing with systems in two dimensions.
Kai: And the paper's limitation is that this analytical expression specifically fails for three or more dimensions, so you have to be careful about applying their formula outside of two dimensions.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals