A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids
summary
The gist
A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids explores how these two dimensionless parameters…
In short
This study numerically investigates how two dimensionless parameters, the Weissenberg number and viscosity ratio, affect fluid flow using a log-strain tensorial model for viscoelastic fluids. The research compares these results to Newtonian limits in channel flow and past a cylinder, showing how the flow profile changes from quasi-Newtonian to plug-like behavior as the Weissenberg number increases.
Key concepts
- Log-Strain Tensorial Model
- This is a mathematical framework used to describe viscoelastic fluids where the elastic strain is treated as a conformation tensor. This model ensures that the elastic strain's evolution equation maintains its positive definiteness and determinant, which is essential for physically realistic fluid behavior under flow.
- Weissenberg Number (Wi)
- The Weissenberg number represents the ratio of an elastic property time scale to a characteristic flow time scale. It is a key parameter that dictates how much the fluid's elasticity influences its motion. Increasing Wi generally leads to more non-Newtonian, complex flow patterns.
- Viscosity Ratio ($\xi$)
- The viscosity ratio is a dimensionless parameter that compares the fluid's viscoelastic properties to its solvent viscosity. It helps quantify the relative importance of the elastic stress component in determining the overall fluid response during flow simulations.
Terminology used across episodes
This episode discusses
- A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids · Paper Radio
The paper
A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids · Read on arXiv
Department of Mathematics “Tullio Levi-Civita”, University of Padova · Department of Civil and Environmental Engineering, Polytechnic University of Catalonia · International Centre for Numerical Methods in Engineering, Barcelona
We present a computational study aimed at exploring the different and independent roles of the Weissenberg number and of the ratio between the polymeric and solvent viscosity contributions in a viscoelastic fluid model. The tensorial model under investigation, recently proposed, is based on a logarithmic relation between the elastic (or recoverable) strain and the elastic stress. In this model, the elastic strain plays the role of a conformation tensor and its evolution equation inherently preserves its determinant and positive definiteness. These properties are also enforced in the computational method employed in the study. A finite-difference discretization in time is combined with a stabilized mixed finite element formulation based on the Variational Multiscale method for the spatial discretization and with a generalized Lie derivative approach for the advection terms. The behavior of the model is analyzed in paradigmatic pressure-driven flows and we find that the value of the viscosity ratio is crucial in determining to which extent non-Newtonian flow profiles are observed upon increasing the Weissenberg number. By comparing the solutions of the log-strain tensorial model with those of a suitable Generalized Newtonian Fluid model, we show that flow-type dependence and memory play a significant role even in the simple planar flow past a cylinder.
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids".
Mira: Here's the gist of the paper. A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids explores how these two dimensionless parameters independently influence flow behavior in various geometries, which is crucial for developing predictive computational tools Model Formulation The study investigates a logarithmic strain tensorial model where the elastic strain plays the role of a conformation tensor and its evolution equation inherently preserves its determinant and positive definiteness The governing equations for the current log-strain viscoelastic model are derived by substituting the definition of the extra stress tensor T into the momentum equation, resulting in equations (6)–(8) The constitutive prescription for the elastic stress Tel reads Tel = κ log Bel, with κ > 0 an elastic modulus The three independent dimensionless parameters are the Reynolds number Re, the Weissenberg number Wi, and the viscosity ratio ξ Numerical Strategy The computational method employs a finite-difference discretization in time combined with a stabilized mixed finite element formulation based on the Variational Multiscale method for the spatial discretization and with a generalized Lie derivative approach for the advection terms The temporal discretization uses a semi-implicit first-order Backward Euler scheme, treating nonlinear terms by linearization using known quantities from the previous iteration The evolution equation for the strain tensor Bel is treated using a generalized Lie derivative formulation To ensure numerical stability and robustness across a wide range of parameter regimes, a residual-based stabilized finite element method is adopted, which involves splitting the unknown U into two components, Uh and U˜ Flow Analysis in Channel Flow In the flow of a viscoelastic fluid in a straight channel (Section 4.1), the model predictions are compared with the Newtonian limits corresponding to solvent viscosity η and the effective zero-shear viscosity ηeff = η + κτr For finite values of ξ, the channel flow profiles interpolate between a quasi-Newtonian behavior at low Wi and another parabolic profile to which the velocity tends asymptotically for larger and larger values of Wi In the intermediate regime, the flow profile presents a plug-like region around the center of the channel, which shrinks upon increasing Wi Flow Analysis Past a Cylinder The flow past a cylinder (Section 4.
Paper summary: Mira: Looking at this paper, "A numerical study to analyze the interplay of Weissenberg number and viscosity ratio in a log-strain tensorial model for viscoelastic fluids," the main implication seems to be that by separating the effects of Weissenberg number and viscosity ratio, we get a clearer picture of how these factors independently control flow behavior in complex geometries.
Kai: It’s about testing that log-strain tensorial model, where the elastic strain is treated as a conformation tensor that maintains its positive properties through its evolution equation. The authors are showing how this specific mathematical structure allows them to see those independent roles of the two dimensionless parameters in action across channel flows and past cylinders.
Lev: For someone building real hardware, it means we have a validated numerical tool for exploring these regimes, but the caveat is that running those high Weissenberg number cases requires a very stable numerical method, like the residual-based stabilized finite element method they used to keep things from blowing up.
Mira: So in simpler terms, the paper claims that by studying this specific model and tuning its two key parameters—Weissenberg number and viscosity ratio—we can predict how a viscoelastic fluid will behave in different flows much more accurately than just looking at one parameter alone.
Kai: It’s about using this study to develop better computational tools for predicting flow, which is what they say is the crucial part for the future. They are mapping out the relationship between those dimensionless numbers to guide how we build simulations and experiments going forward.
Conclusion: Kai: So, we've been looking at this paper that uses a log-strain tensorial model to see how two parameters, the Weissenberg number and the viscosity ratio, affect flow in viscoelastic fluids.
Mira: Yeah it’s about exploring how those two things independently control the flow behavior in different shapes like channels and cylinders.
Lev: From my side I’m curious if this model is robust enough to handle the actual physical scales we deal with in experiments right now.
Kai: The authors used a finite-difference method combined with a stabilized finite element formulation to get these results. They also tested it against Newtonian limits, which gives us a baseline for what we expect.
Mira: And what they found is that for channel flow, the profile shifts from something almost Newtonian at low Weissenberg numbers to something parabolic as the Weissenberg number gets bigger.
Lev: That parabolic profile is interesting because it suggests a different kind of structure forming in the fluid under those conditions, which could change how we think about turbulence or near-wall effects.
Kai: And when you look at flow past a cylinder, they show that there’s this plug-like region right around the center of the channel.
Mira: That plug shrinks as the Weissenberg number increases, which means those elastic stresses are starting to spread out more across the flow instead of staying concentrated in one spot.
Lev: If that concentration drops, it might mean that in real hardware we’d see less localized stress buildup than this model suggests at high Weissenberg numbers.
Kai: So basically the paper is showing us a way to predict how much those two factors interact without just looking at them separately.
Mira: The authors are trying to build a clearer picture of the underlying physics for these fluids in general, which helps when we try to design new materials or predict how they’ll behave under stress.
Lev: It sets up a good framework for what error correction strategies might look like if we were trying to simulate these complex flows on real hardware with limited resources.
Kai: This study shows us the math behind the behavior of these fluids, and it opens up new avenues for computational tools to model them better.
More episodes
- 2610.32678-Probing the limits of materials design via a comprehensive crystal database of 14.6 million structures with 140 properties
- 2610.33595-Native-oxide-driven layer asymmetry, two-step switching and exchange bias in Co/Ir/Co trilayers
- 2503.19572-Spin models from nonlinear cellular automata
- 2606.23350-Irreversibility Enhances Quantum-Enhanced Markov-Chain Monte Carlo
- 2608.02744-Two-Parameter Ansatz for the Violation of Eigenstate Thermalization
- 2210.00806-Low- and high-energy localization landscapes for tight-binding Hamiltonians in two-dimensional lattices
- 2409.09625-Selective switch for band-edge alignments in pentagonal CdSeTe monolayer: Atom-valley locking
- 2606.20168-Norms, overlaps and Yangian descendants for the Haldane-Shastry spin chain
- 2512.19503-Strain-induced splitting of the CCDW-NCCDW phase transition in 1T-TaS 2
- 2307.12638-Strong localization of microwaves beyond two dimensions in aperiodic Vogel spirals