FiDeR: Denoising Astronomical Images at the Observational Resolution

summary

The gist

FiDeR presents Finite-iteration Deconvolution–Reconvolution Denoising (FiDeR), a method for reducing noise in astronomical images while retaining approximately the input point-spread function (PSF)…

In short

FiDeR is a method for reducing noise in astronomical images by combining finite Richardson-Lucy iterations with a kernel derived from calibrating point-source responses. It reconstructs source and background together and then subtracts the background after reconvolution, achieving significant noise reduction while preserving the input point-spread function.

Key concepts

Finite-Iteration Reconstruction
This involves using a finite number of Richardson-Lucy iterations to reconstruct an image from a Poisson negative log likelihood. This process iteratively refines an initial guess until it converges, with test budgets varying between 200 and 1000 iterations.
Point-Source Response and Matching Kernel
FiDeR measures how the reconstructed point source responds at different background-to-source ratios. This response is used to derive a reconvolution kernel that is matched to the observational Point Spread Function (PSF), aiming to reconstruct the true input PSF.
Reconstruction Process
The method first reconstructs both the source and background components simultaneously using the finite RL update rule. After this joint reconstruction, the background is subtracted from the result via reconvolution, which helps separate noise from actual signal structures.
PSF Preservation
The primary goal of FiDeR is to reduce noise while maintaining approximately the original input point-spread function (PSF). This means that after denoising, the characteristic shape and resolution of the astronomical source remain largely unchanged.

Terminology used across episodes

This episode discusses

The paper

FiDeR: Denoising Astronomical Images at the Observational Resolution · Read on arXiv

Lei Wang, Bin Li, Lin Nie, Zhaojun Yan, Xuechun Chen, Yachong Diao, Huanyuan Shan

Purple Mountain Observatory, Chinese Academy of Sciences · Shanghai Astronomical Observatory, Chinese Academy of Sciences · Beijing City University

We present Finite-iteration Deconvolution--Reconvolution Denoising (FiDeR), a method for reducing noise in astronomical images while retaining approximately the input point-spread function (PSF). We first apply a finite number of Richardson--Lucy (RL) iterations to the nonnegative source-plus-background image. We then measure the response of a calibration point source processed with the same settings and derive a reconvolution kernel matched to the observational PSF. The calibration includes the background-to-source flux ratio. We compare FiDeR with six denoisers using simulated point-source and mixed stellar--galaxy fields, and observations from the James Webb Space Telescope Near-Infrared Camera (NIRCam) and Mid-Infrared Instrument (MIRI). In the stellar tests, bright-source widths remain close to the input widths; faint sources show small residual offsets. For the mixed field, FiDeR reaches peak signal-to-noise ratios of 46.701 and 44.850 dB at backgrounds of 10 and 20 counts per pixel, with wing errors of 0.657 and 0.858 counts. It also gives small aperture-flux and shape errors, although block-matching and three-dimensional filtering (BM3D) gives higher structural similarity. The NIRCam data show lower core and combined-region errors, while the three-exposure MIRI test gives benefits mainly in the stellar aperture and photometry. These results support substantial noise reduction with little change in the measured PSF within the tested regimes. The denoised images can provide inputs for further reconstruction and measurement; their uncertainties must account for residual noise correlations.

Transcript

Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.

Vera: I'm Vera.

Jocelyn: And I'm Jocelyn, here with Subrahmanyan.

Vera: We're looking at the paper: "FiDeR: Denoising Astronomical Images at the Observational Resolution".

Jocelyn: Here's the gist of the paper. FiDeR presents Finite-iteration Deconvolution–Reconvolution Denoising (FiDeR), a method for reducing noise in astronomical images while retaining approximately the input point-spread function (PSF) We first apply a finite number of Richardson–Lucy (RL) iterations to the nonnegative source-plus-background image We then measure the response of a calibration point source processed with the same settings and derive a reconvolution kernel matched to the observational PSF We compare FiDeR with six denoisers using simulated point-source and mixed stellar–galaxy fields, and observations from the James Webb Space Telescope Near-Infrared Camera (NIRCam) and Mid-Infrared Instrument (MIRI) FiDeR introduces a method that calibrates the point-source response of the finite RL reconstruction at the relevant background-to-source ratio and uses that response to derive the reconvolution kernel The target is normally the input PSF The method reconstructs source and background together, then subtract the background after reconvolution Finite-Iteration Reconstruction The reconstruction involves a Poisson negative log likelihood L(x; y) and the RL update x(j+1) = x(j)⊙ HT h y Hx(j)i, with x(0) = y The tests use iteration budgets of 200 or 1000 Point-Source Response and Matching Kernel The normalized background-subtracted response is defined as K(β)e,k = Dk(Fch + b1; h) − b1 Fc = Dk(h + β1; h) − β, where β = b/Fc A regularized Fourier solution is used to seek a kernel ak such that ak ∗ K(β)e,k ≃ h⋆, where the target h⋆ is normally the input PSF h Simulation Results and Comparison FiDeR reaches peak signal-to-noise ratios of 46.701 and 44.850 dB at backgrounds of 10 and 20 counts per pixel, with wing errors of 0.657 and 0.858 counts In the mixed field, FiDeR reaches peak signal-to-noise ratios of 46.701 and 44.850 dB at backgrounds of 10 and 20 counts per pixel, with wing errors of 0.657 and 0.858 counts FiDeR’s aperture-flux MAEs are 0.96% and 1.06%, compared with 1.04% and 1.18% for BM3D Observational Validation The NIRCam observations show lower core and combined-region errors The threeexposure MIRI test gives benefits mainly in the stellar aperture and photometry FiDeR reduces core RMSE to 16.598 counts, from 35.366 for Raw and 35.304 for BM3D Within the stellar aperture, FiDeR gives the lowest RMSE, 0.1230 ± 0.0157 MJy sr−1 FiDeR achieves substantial noise reduction with little change in the measured PSF in the tested regimes, and improves on conventional denoisers in several scenes These properties can benefit repeated exposures before UPDC deconvolution coaddition (L.

Vera: Wang et al.

Jocelyn: 2022, 2025), machine-learning inputs, and morphological measurements The expected gains in these applications should be measured with end-to-end tests that account for the covariance of the processed pixels APPENDIX A.

Vera: DIAGNOSTIC DEFINITIONS For an output source image I and reference T, we use the residual di = Ii − Ti We use 11 × 11 Gaussian windows with standard deviation 1.5 pixels and population covariance The structural similarity index measure (SSIM; Z.

Paper summary: Vera: So to recap for this paper, FiDeR is a new method designed to reduce noise in astronomical images while keeping approximately the input point spread function.

Jocelyn: The main claim is that they first apply a finite number of Richardson–Lucy iterations to an image that contains both a source and some background.

Subrahmanyan: Then they measure the response of a calibration point source processed with those same settings, and use that measurement to derive a reconvolution kernel matched to the observational point spread function.

Vera: The whole thesis is that this approach lets them reconstruct the source and background together, and then they subtract just the background after reconvolution.

Jocelyn: They compare FiDeR with six other denoisers using simulated fields involving both point sources and mixed stellar and galaxy fields to see how it stacks up against them.

Subrahmanyan: Furthermore, they apply this exact approach to James Webb Space Telescope observations.

Vera: The results show that FiDeR achieves substantial noise reduction with very little change in the measured point spread function in the tested regimes.

Jocelyn: This means it has potential benefits for repeated exposures before deconvolution coaddition, machine learning inputs, and morphological measurements.

Subrahmanyan: The method extends previous uses of PSF-based iterative processing to a new task: denoising at the observational resolution instead of just upsampling or deconvolution coaddition.

Conclusion: Vera: So, looking at "FiDeR: Denoising Astronomical Images at the Observational Resolution" by Wang and colleagues, it seems this paper presents a way to clean up noisy astronomical data while trying to preserve the original image structure.

Jocelyn: What they’re really saying is that this technique calibrates how a finite Richardson–Lucy reconstruction responds to the specific background and source ratio we're dealing with.

Subrahmanyan: By using that calibration, they build a kernel that helps them separate the background from the source after reconstruction.

Vera: The implication is that for people working with repeated exposures or when using machine learning on astronomical data, this could give them cleaner inputs for analysis.

Jocelyn: It’s about making sure the noise reduction doesn't come at a huge cost to the actual shape of the object we're studying.

Subrahmanyan: The paper suggests that because it works across both compact and extended sources in their tests, this is a technique that could be useful in many different types of imaging science.

More episodes

← Home