Euclid Data Release 1 (DR1) - NISP-P point-spread function modelling pipelines
summary
The gist
The images collected in photometric mode by the Near-Infrared Spectrometer and Photometer (NISP) instrument of the Euclid satellite are used to model the point-spread function (PSF) of a selection of…
In short
The study developed a module to model point-spread functions (PSF) for sources detected by Euclid's Near-Infrared Spectrometer and Photometer (NISP). Using data from single and combined frames, the resulting PSF models meet key mission requirements, though improvements are planned for future releases.
Key concepts
- Near-Infrared Spectrometer and Photometer (NISP)
- This is an instrument on the Euclid satellite used to collect photometric images in the near-infrared spectrum. The study focuses on using these images to understand how point sources appear, which helps in accurately measuring their properties.
- Point-Spread Function (PSF)
- The PSF describes how a perfect, infinitely small point source is smeared or spread out by the telescope and instrument. Modeling this function is crucial for accurately determining the brightness and position of astronomical objects.
- NIR_PointSpreadFunction module
- This is a software tool developed to model the PSF profile for point-like sources observed by NISP, especially under undersampled conditions. It operates in two modes: Mission Database (MDB) mode for single exposures and Inflight mode for all frames.
- MAG_PSF and MAG_APER
- These are parameters derived from fitting the PSF profile to the source images. Comparing them shows an offset, indicating a need to apply corrections based on fixed-aperture photometry to ensure accuracy against mission goals.
Terminology used across episodes
This episode discusses
- Euclid Data Release 1 (DR1) - NISP-P point-spread function modelling pipelines · Paper Radio
- Euclid Definition Study Report
The paper
Euclid Data Release 1 (DR1) - NISP-P point-spread function modelling pipelines · Read on arXiv
R. da Silva, F. Faustini, G. Polenta, A. Alavi, A. Alessio, P. N., Appleton, P., Awad, A., Ã Bonchi
European Space Agency
The images collected in photometric mode by the Near-Infrared Spectrometer and Photometer (NISP) instrument of the Euclid satellite are used to model the point-spread function (PSF) of a selection of sources detected in single and combined frames. We used Q1 and DR1 data to improve the development of the PSF module of the near-infrared processing function (NIR PF) and to refine the models currently provided. We explored a few methods normally used to evaluate the quality of the derived models and discuss possible variations related to the position of the sources in the focal plane and to the wavelength and time of the observations. The procedure of fitting the PSF profile, compared to other methods used for flux estimation, such as aperture photometry, indicates that updated models are better than those provided by Q1 images. The current results are in agreement with several key requirements defined for the mission, but there is still room for further improvements, which we plan to investigate and implement in future releases.
Transcript
Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.
Vera: We're looking at the paper: "Euclid Data Release 1 (DR1) - NISP-P point-spread function modelling pipelines".
Jocelyn: Here's the gist of the paper. The images collected in photometric mode by the Near-Infrared Spectrometer and Photometer (NISP) instrument of the Euclid satellite are used to model the point-spread function (PSF) of a selection of sources detected in single and combined frames The current results are in agreement with several key requirements defined for the mission, but there is still room for further improvements, which we plan to investigate and implement in future releases Modeling Methodology The NIR PointSpreadFunction module of the near-infrared processing function (NIR PF, Euclid Collaboration: Polenta et al.
Vera: 2026b,a) was developed to model the PSF profile of point-like sources observed by NISP under undersampled conditions This module can be executed in two different modes, in Mission Database (MDB) mode or Inflight mode MDB mode is applicable only for single-dither exposures, whereas the Inflight mode is appropriate for all NIR frames, single or stacked PSF Model Derivation The NIR PSF task requires the utilisation of two external packages that are part of the AstrOmatic software The SourceExtractor package (Bertin & Arnouts 1996) is used to extract source catalogues from the observed images Then, the PSF profile modelling is performed using the PSFEx package (Bertin 2011) In MDB mode, a total of 2160 PSF shapes were derived on a coarse grid of focal plane positions (five per each of the 16 detectors) and wavelengths (optical monochromatic shapes at nine wavelengths over each of the three NISP-P passbands) Performance Evaluation The top panels of Fig.
Jocelyn: 1 show examples of extended PSF models derived on the basis of single-dither exposures from SCF data observed in the NISP-P YE, JE, and HE passbands The bottom panels of the same figure show, for each passband, an image stamp calculated as the median profile of point-like sources Table 7 lists our estimate of rEE50 and rEE80 for the 16 NISP detectors and for the stacked frame shown as examples in Figs.
Vera: 2 and 4 All these values are well below the thresholds mentioned in Sect.
Paper summary: Vera: So, to summarize this paper on "Euclid Data Release one (DR1) - NISP-P point-spread function modelling pipelines," they are focusing on using the images from the Near-Infrared Spectrometer and Photometer instrument of the Euclid satellite to model how sharp or blurry those point sources actually look <ref:2611.16494#pg1,Euclid Data Release 1 (DR1) - NISP-P point-spread function modelling pipelines>.
Jocelyn: The central claim is that they used Q1 and DR1 data specifically to improve the development of a module called NIR PointSpreadFunction within the near-infrared processing function, which is part of the Euclid Collaboration work >
Subrahmanyan: And what matters here is that they are refining those existing models. They are demonstrating how this new procedure works through photometric measurements based on PSF models derived from single-dither exposures and stacked images >
Vera: The paper also explores a few methods normally used to evaluate the quality of these derived models, which is important because you don't just want a model; you want to know how good it is at predicting the real sky signal >
Jocelyn: They discuss possible variations related to the position of the sources in the focal plane and also how wavelength and time affect those models >
Subrahmanyan: I’m interested in that. If you can account for those dependencies, you get a more accurate picture of what we're seeing across different sky regions and observational periods >
Conclusion: Vera: So, looking at "Euclid Data Release one (DR1) - NISP-P point-spread function modelling pipelines," the authors are really focused on building a more robust way to describe how the NISP instrument blurs those point sources <ref:2611.16494#pg1,Euclid Data Release 1 (DR1) - NISP-P point-spread function modelling pipelines>.
Jocelyn: They developed this NIR PointSpreadFunction module using Q1 and DR1 data, showing that these updates are better than what was previously available >
Subrahmanyan: For cosmology, this means we can get more reliable flux measurements for faint objects in the near-infrared. That directly impacts our ability to look at distant galaxies or perhaps even map the structure of dark matter >
Vera: Exactly. The authors point out that the mission requirement related to the centroid positions estimated during PSF fitting is comfortably satisfied, which means their core goal for accurate source positioning is met >
Jocelyn: And they recommend applying a correction to the magnitude parameter, MAG PSF, because they observed an offset when using newer versions of their code and older models >
Subrahmanyan: So in simple terms, this paper is about taking the raw data from Euclid’s infrared camera and creating a much more accurate tool for measuring how bright things are across different parts of the sky >
More episodes
- 2607.17929-gevolution 2.0: GPU-accelerated relativistic N-body simulations for cosmology
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- 2509.02657-On the synergetic use of Ariel and JWST for exoplanet atmospheric science
- 2609.10042-Modelling Fourier filtering wavefront sensors for PSD-based methods: the AOPERA tool
- 2511.05639-Performance of the AstroPix Prototype Module for the Barrel Imaging Calorimeter at the ePIC Detector and in Space-Based Payloads
- 2610.19909-RPCA: a Resolved PSF reconstruction method for undersampled images
- 2512.03440-An Analysis of LIGO Glitches Using t-SNE During the First Part of the Fourth LIGO-Virgo-KAGRA Observing Run
- 2608.10284-Lunar Reflective Interferometry
- 2610.16633-Institutional broadening of the Japanese astronomy and astrophysics research community during 1996-2025