Detection and excision of radio-frequency interference in radio arrays
summary
The gist
The paper develops a model to determine which data product—individual antenna streams or coherent array combinations—is most detectable for suppressing radio-frequency interference (RFI) in radio…
In short
The paper develops a model to determine whether individual antenna streams or coherent array combinations are better for suppressing radio-frequency interference (RFI) in radio arrays. It finds that the autocorrelation sum is generally more sensitive to RFI than other methods, suggesting a two-step approach: first clean individual streams, then check the summed autocorrelations.
Key concepts
- Per-baseline RFI coherence ($\gamma_{pq}$)
- This measures how much of the RFI power survives into a specific data measurement (visibility) between two antennas. It is a key factor in determining suppression; higher coherence means less suppression. This factor can be broken down into bandwidth smearing, fringe-rate time-smearing, and intrinsic spatial coherence.
- Autocorrelation Sum ($R_{auto}$)
- This estimator involves summing the autocorrelations across all antennas. The paper shows this sum is generally more sensitive to RFI than other detection schemes. It is computationally simple and offers good time and frequency resolution for matching RFI sources.
- Visibility ($V_{pq}$)
- Visibilities are samples of the spatial coherence function, calculated from channelized voltage data. They represent how the signal coherence changes across different baselines (distances between antennas). These are used in the theoretical framework to define detectability and suppression mechanisms.
- Fringe Tracking
- This technique is used to detect RFI emitters that are moving rapidly relative to the radio array, such as aircraft or satellites. It works by analyzing how fringe patterns change over time. This method provides significant suppression for moving interference in most large sparse arrays.
Terminology used across episodes
This episode discusses
- Detection and excision of radio-frequency interference in radio arrays · Paper Radio
- Real-time RFI Mitigation Techniques in Radio Astronomy and Their Practical Limitations
- Radio Frequency Interference
- The DSA-2000 -- A Radio Survey Camera
- Can Dynamic Spectrum Sharing Protect Passive Radio Sciences?
- Nature and Evolution of UHF and L-band Radio Frequency Interference at the MeerKAT Radio Telescope
The paper
Detection and excision of radio-frequency interference in radio arrays · Read on arXiv
Vikram Ravi
California Institute of Technology · Owens Valley Radio Observatory
The detection and excision of radio-frequency interference (RFI) is usually approached by asking how best to identify RFI within a given data product. I address a prior question: which data product is a given RFI emitter is most detectable in? I develop a model for the suppression of RFI in visibilities and tied-array beams by the antenna primary beam, near-field wavefront curvature, bandwidth smearing, and fringe tracking. The comparison between antenna-based and array-based detection reduces to a single quantity related to the mean per-baseline RFI coherence. Cross-correlation detection is preferred only above a coherence threshold of (N-1)-1/2, where N is the number of antennas. I evaluate this model for four array configurations (the Very Large Array A and D configurations, and the fixed MeerKAT and Deep Synoptic Array / DSA configurations) and five representative RFI emitters spanning distances of 5,km to medium-Earth orbit. Compact, filled, arrays favor the cross-correlations for stationary terrestrial emitters, whereas extended sparse arrays do not. RFI emitters with significant motion relative to radio arrays, in particular aircraft and low- and medium-Earth-orbit satellites, favor the sum of antenna autocorrelations everywhere by one to seven orders of magnitude, because their coherence is destroyed by rapid fringe rotation. For RFI below the single-antenna noise, no phase-unknown cross-correlation statistic is more sensitive than the autocorrelation sum. Tied-array beams are the least sensitive data product of all: the array factor supplies no suppression of terrestrial RFI, so a beam sees an emitter as a single antenna does. I describe a real-time, GPU-based implementation of autocorrelation-based excision for the 110-antenna Deep Synoptic Array, and outline the design implications for upcoming arrays.
Transcript
Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.
Vera: I'm Vera.
Jocelyn: And I'm Jocelyn, here with Subrahmanyan.
Vera: We're looking at the paper: "Detection and excision of radio-frequency interference in radio arrays".
Jocelyn: Here's the gist of the paper. The paper develops a model to determine which data product—individual antenna streams or coherent array combinations—is most detectable for suppressing radio-frequency interference (RFI) in radio arrays The detection and excision of radio-frequency interference (RFI) is usually approached by asking how best to identify RFI within a given data product.
Vera: The comparison between antenna-based and array-based detection reduces to a single quantity related to the mean per-baseline RFI coherence.
Jocelyn: Cross-correlation detection is preferred only above a coherence threshold of (N − 1)−1/2, where N is the number of antennas.
Vera: Compact, filled, arrays favor the crosscorrelations for stationary terrestrial emitters, whereas extended sparse arrays do not.
Title and authors: Vera: So what is the actual theoretical framework they use to set up this detectability problem? They start by defining visibilities and beams from channelized voltage data.
Jocelyn: It defines them in terms of how you sample spatial coherence, which they call the visibility, written as V p q equals the average of v p times q-star.
Subrahmanyan: Then they introduce a specific formula for a deterministic emitter at a finite distance that gives you the visibility contribution, which involves the gain and an integral over solid angle with an exponential term.
Vera: The suppression they derive comes from averaging that formula over bandwidth, time, or baselines to get those coherence factors.
Jocelyn: They break down the per-baseline RFI coherence into three main pieces: bandwidth smearing, which is γ bw pq; fringe rate time-smearing, which is γ fr pq; and the intrinsic spatial coherence of the RFI itself.
Subrahmanyan: So they’re saying the suppression depends on how smeared that RFI signal gets across the channel, how quickly that fringe rate smears over time, and how coherent that interference is inherently.
Vera: They also point out a key limitation regarding fringe tracking: it provides no suppression for interference that is impulsive on timescales shorter than one second in any ground-based array.
Jocelyn: It means if the RFI is really sharp and fast, like a very sudden spike, fringe tracking won't help you much in an array setting.
The paper's summary: Vera: One of the practical improvements they suggest is focusing on how you handle the data processing, moving towards real-time excision using GPU-based methods for large arrays.
Jocelyn: They describe a real-time implementation for an array like the eleven hundred antenna Deep Synoptic Array, which searches for fast radio bursts in real time.
Subrahmanyan: The improvement there is that they can form power moments once to reduce every operation in their processing from a second pass over the voltages down to just a reduction over resident tensors.
Vera: They also suggest using AI systems for hierarchical mitigation, meaning you flag individual antenna streams first and then inspect the autocorrelation sum afterwards.
Jocelyn: They argue that this ordering matters because the sum is not robust to those per-element tests they design to find RFI on a single antenna element.
Subrahmanyan: That connects back to the theory; it suggests that you should condition those individual streams first before looking at the final sum, because of how sensitive the sum itself is.
The paper's improvements: Vera: So summarizing this paper "Detection and excision of radio-frequency interference in radio arrays," the main finding is that autocorrelation sum is generally more sensitive to RFI than other methods they tested.
Jocelyn: And they suggest a specific workflow where you flag individual antenna streams first, and then inspect the autocorrelation sum afterwards because it has the advantage of ease of computation and lets you match time or frequency resolutions to the interference source.
Subrahmanyan: From a theoretical view, it confirms that for bright stationary terrestrial emitters on compact arrays, cross-correlations are better than extended sparse ones; but for moving emitters like planes or satellites, the sum of autocorrelations is superior due to fringe rotation effects.
Vera: So the practical implication is that the best path depends entirely on what you’re dealing with: the array you have, the local RFI environment, and what science case you are trying to pursue.
Jocelyn: They wrap up by emphasizing that for various RFI signals, suppression is achieved in visibility data and tiedarray beam data.
Subrahmanyan: That's a solid summary of what the paper established about these detection schemes in radio arrays.
Conclusion: Vera: So we've talked about how autocorrelation sums are more sensitive for radio interference in radio arrays, which is what this paper, "Detection and excision of radio-frequency interference in radio arrays," really gets at.
Jocelyn: It boils down to this: you condition those individual antenna streams first, and then the autocorrelation sum gives you a better signal to look at because it’s easier to compute and matches the time or frequency resolutions we need for the source.
Subrahmanyan: From a theoretical standpoint, it confirms that for bright stationary emitters on compact arrays, cross-correlations are better than extended sparse ones, but for moving emitters like planes or satellites, the sum of autocorrelations is superior because of those fringe rotation effects.
Vera: That’s what the data tells us then—the optimal path depends on the array you have and what kind of RFI you're hunting.
Jocelyn: And they show that real-time GPU processing can handle big arrays, like that eleven hundred antenna Deep Synoptic Array, by using power moments to cut down the operations from two passes to just one.
Subrahmanyan: It’s interesting that for moving RFI, the fringe tracking method actually works well in most large sparse arrays because you see significant suppression in those fringe-tracked visibilities.
Vera: So it’s about finding that balance between real-time speed and getting a clean estimate of the interference.
Jocelyn: That's what we were looking at, but this paper also flags a limitation: fringe tracking doesn't help with impulsive interference that happens on timescales shorter than one second in any ground array.
Subrahmanyan: Exactly, so if you’re dealing with something really sharp and fast, like a very sudden spike in the signal record, the fringe tracking won't give you much suppression.
Vera: So this whole study on "Detection and excision of radio-frequency interference in radio arrays" gives us a clear practical roadmap for how to clean up our data before we look at science.
Jocelyn: It really emphasizes that AI can use that hierarchical approach—flag the streams, then check the sum—because you know those per-element tests aren't robust enough on their own.
Subrahmanyan: For cosmology, this means if we’re looking for signals from moving sources like low and medium Earth orbit satellites, using the autocorrelation sum with those fringe tracking elements could be a way to isolate them from terrestrial noise.
Vera: It sounds like a solid piece of work that gives us concrete things to test on our next instrument designs.
Jocelyn: Yeah, it sets the stage for how we can get cleaner data streams for things like fast radio bursts or even just better pulsar timing in noisy environments.
More episodes
- 2607.17929-gevolution 2.0: GPU-accelerated relativistic N-body simulations for cosmology
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- 2509.02657-On the synergetic use of Ariel and JWST for exoplanet atmospheric science
- 2609.10042-Modelling Fourier filtering wavefront sensors for PSD-based methods: the AOPERA tool
- 2511.05639-Performance of the AstroPix Prototype Module for the Barrel Imaging Calorimeter at the ePIC Detector and in Space-Based Payloads
- 2610.19909-RPCA: a Resolved PSF reconstruction method for undersampled images
- 2512.03440-An Analysis of LIGO Glitches Using t-SNE During the First Part of the Fourth LIGO-Virgo-KAGRA Observing Run
- 2608.10284-Lunar Reflective Interferometry
- 2610.16633-Institutional broadening of the Japanese astronomy and astrophysics research community during 1996-2025