Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system for the SAAO 1.9 m telescope

summary

The gist

FiberPol is a fiber-fed spectropolarimetric front-end for the SpUpNIC spectrograph on the 1.9 m telescope that combines fiber-based spectroscopy and polarimetry to enable a wide range of science…

In short

FiberPol is a low-cost, fiber-fed spectropolarimetric front-end for the SpUpNIC spectrograph on a 1.9 m telescope, designed for interstellar medium studies and as a pathfinder for larger telescopes. It combines fiber spectroscopy with polarimetry using Wollaston prism and half-wave plate systems to measure Stokes parameters (I, q, u). Lab tests confirmed high accuracy (0.1%) in the 400–700 nm range, and on-sky performance yielded uncertainties of 0.2%–0.3% for polarization.

Key concepts

FiberPol
FiberPol is a compact, low-cost system that feeds light from fibers into the SpUpNIC spectrograph. It measures both the wavelength and the polarization of light simultaneously, allowing scientists to study how light interacts with matter in space.
Stokes Parameters (I, q, u)
These are mathematical quantities used to describe the polarization of light. 'I' represents total intensity, while 'q' and 'u' describe the linear polarization components. Measuring these allows researchers to quantify the degree and orientation of polarization in astronomical sources.
Wollaston Prism
A Wollaston prism is a key optical component in FiberPol that splits incoming light into two separate paths. In this system, one path is used for intensity measurement, and the other for polarization analysis, enabling the extraction of Stokes parameters efficiently.
On-Sky Performance
This refers to how well FiberPol functions when actually observing astronomical objects through a telescope. The paper shows that despite being on-sky, the system successfully measured polarization with uncertainties typically between 0.2% and 0.3% across the relevant wavelength range.

Terminology used across episodes

This episode discusses

The paper

Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system for the SAAO 1.9 m telescope · Read on arXiv

South African Astronomical Observatory · University of Oxford Department of Astrophysics Department of Astronomy University of Cape Town Space Science and Engineering Initiative College of Engineering University of Hawaii at Manoa Centre for Space Research North-West University National Science Foundation

At the South African Astronomical Observatory (SAAO), we have developed FiberPol - a spectropolarimetric front-end for the SpUpNIC spectrograph on the 1.9 m telescope fed by fibers. In conjunction with SpUpNIC, it combines two niche techniques: fiber-spectroscopy and polarimetry to enable a wide range of science cases, particularly for studies of the interstellar medium, and serves as a technology pathfinder for implementing polarimetry larger facilities such as the 10 m Southern African Large Telescope. Commissioned in early 2025, FiberPol has already demonstrated key performance benchmarks. Based on a preliminary data reduction pipeline, we find that the uncertainties in the measured Stokes parameters q and u, and the degree of polarization p are in the range of 0.2% to 0.3% in 5 nm spectral bins across the 400 to 700 nm wavelength range. With improved calibration and refined analysis, we expect to reach our design goal of 0.1% accuracy per bin. Several science programs are already underway following its successful commissioning. FiberPol employs a Wollaston prism and half wave plate system to analyze linear polarization and extract spectropolarimetric data comprising wavelength (λ) and the Stokes parameters (I, q and u). Its compact and modular design uses primarily small, commercially available optical and optomechanical components, making it straightforward to adapt to other spectrographs, including those on larger telescopes. This paper presents the design, laboratory validation, and commissioning results of FiberPol, and outlines planned upgrades to further enhance its scientific impact.

DOI: 10.1117/12.3102800

Transcript

Introduction to the show: ident: Astrophysics. The day in astrophysics: observations, models and what the data forces.

Vera: We're looking at the paper: "Commissioning and on-sky performance of FiberPol".

Jocelyn: Here's the gist of the paper. FiberPol is a fiber-fed spectropolarimetric front-end for the SpUpNIC spectrograph on the 1.9 m telescope that combines fiber-based spectroscopy and polarimetry to enable a wide range of science cases, particularly for studies of the interstellar medium, and serves as a low-cost technology pathfinder for larger facilities such as the 10 m Southern African Large Telescope<ref:2607.16111#pg5>.

Vera: Instrument Overview FiberPol is a compact (20 × 20 × 20 cm3), low-cost (under 10,000), and modular system for the SpUpNIC spectrograph<ref:2607.16111#pg4>.

Jocelyn: It employs a Wollaston prism and half-wave plate system to analyze linear polarization and extract spectropolarimetric data comprising wavelength (λ) and the Stokes parameters (I, q, u)<ref:2607.16111#pg3>.

Vera: The design uses primarily small, commercially available off-the-shelf optical and optomechanical components<ref:2607.16111#pg5>.

Title and authors: Vera: Now, looking at the title again, "Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system for the SAAO one point nine m telescope", it really frames this work as a validation exercise <ref:2607.16111#pg1,Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system>. It's not just about designing the parts; it’s about showing that we can actually get usable data from this setup when it’s pointed at sky objects.

Jocelyn: I think what stands out is that they are focusing on the performance when it’s actually operating, which means they have to deal with real-world conditions, not just perfect lab tests. They're testing how well it performs on-sky.

Subrahmanyan: From a theoretical standpoint, the implication is that this setup provides a pathway for adding spectropolarimetric capabilities to existing facilities. It shows how fiber-fed polarimetry can open up new observational avenues that were previously inaccessible with just standard spectroscopy or imaging.

Vera: Right, so it’s about showing the practical steps—the commissioning part—and then proving the results when you actually look at something in the sky. That makes it tangible for anyone thinking about implementing this kind of technology.

Jocelyn: And they’re connecting this to integral-field spectropolarimetry down the line, even though this specific paper is focused on a single-object mode initially. It lays the groundwork for future, more complex observations.

Subrahmanyan: It’s about enabling that integral-field capability by having a proven front-end system first. If you can get reliable polarization data from a single object using this fiber approach, it builds confidence for scaling up the complexity to cover an extended source.

The paper's summary: Vera: The summary of this paper is pretty straightforward: they’ve developed FiberPol, which is this compact, low-cost system that feeds into the SpUpNIC spectrograph on the one point nine meter telescope to measure linear polarization. They use a Wollaston prism and a half-wave plate setup to get wavelength and Stokes parameters like I, q, and u.

Jocelyn: And they’re highlighting that this system uses mostly small, off-the-shelf optical components, which keeps the cost down compared to building something custom from scratch. That low cost is a big selling point for being a technology pathfinder for bigger telescopes later on.

Subrahmanyan: The key result they’re emphasizing is the feasibility of achieving a polarimetric accuracy of zero point one percent for point sources across the four hundred to seven hundred nanometer wavelength range during their laboratory tests. That level of precision is what makes this data valuable for studying things like interstellar medium properties.

Vera: So, we have the design, we have the test results showing that it’s accurate in the lab—point sources at zero point one percent across that wide wavelength band—and now they're moving to show it works on-sky. That bridge between lab success and real sky data is what this summary is about.

Jocelyn: And when they move to on-sky performance, they’re giving us the uncertainties in the measured q and u Stokes parameters, which translates into the degree of polarization, p. They report these uncertainties are typically in the range of zero point two percent to zero point three percent for five nanometer spectral bins over that same four hundred to seven hundred nanometer range.

Subrahmanyan: That uncertainty level gives us a concrete measure of the data quality we can expect when we use this system for actual astrophysical measurements, and it sets expectations for what kind of science we can actually do with this precision.

The paper's improvements: Vera: The paper points out several ways they’ve improved or are planning improvements to take FiberPol further. First, they talk about automating target acquisition by adding an in-out fold mirror mechanism. They argue this will make getting the target onto the fibers much more efficient and reliable, especially for fainter targets because it helps center the object's e and o images on the fibers, which should significantly nullify seeing and tracking errors.

Jocelyn: That sounds like a big help for observational astronomers because dealing with poor seeing is a huge headache. If you can use that mirror mechanism to cancel out some of those atmospheric wobbles, it makes the whole observing process much smoother for everyone involved.

Subrahmanyan: From an engineering perspective, mitigating seeing and tracking errors is crucial when we’re trying to get clean spectropolarimetric data. And they are suggesting this optical improvement is a major step toward making the system robust enough for more demanding science observations.

Vera: They also discuss software integration as an improvement. They suggest integrating the half-wave plate control directly into the SpUpNIC software instead of using that standalone Python script for manual control, which would make observing nearly identical to regular SpUpNIC operations and simplify things a lot.

Jocelyn: That makes sense; having the hardware controls integrated into the main software pipeline streamlines the workflow and reduces potential human error during setup. It just makes it more repeatable.

Subrahmanyan: And then there’s another improvement mentioned regarding wavelength range extension. They suggest replacing some of the current lenses with ones coated for a full optical range, even though this might mean a slight trade-off in throughput, but it would extend FiberPol to cover wavelengths from three hundred fifty to one thousand nanometers.

Vera: Extending the wavelength range to three hundred fifty to one thousand nanometers is really important because it leads directly into improved Serkowski function measurements and enhanced science yield across a much broader spectral area. That’s where you get more data points for modeling the physics of interstellar dust.

Conclusion: Jocelyn: So, wrapping up this discussion on the "Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system for the SAAO one point nine m telescope", it’s clear this paper successfully validated that we can build a low-cost, fiber-fed spectropolarimetric front-end that achieves good accuracy on point sources across a wide wavelength range <ref:2607.16111#pg1,Commissioning and on-sky performance of FiberPol: a fiber-fed spectropolarimetric system>.

Vera: And they showed us the uncertainties in the measured q and u parameters are around zero point two percent to zero point three percent for those spectral bins, which is solid data quality for this type of instrument. It’s a working system now, ready for real use on the one point nine meter telescope.

Subrahmanyan: For cosmology, it means we have a reliable tool to probe the physical properties of things in the interstellar medium that have a systematic asymmetry, which is vital input for models of structure formation and galactic evolution.

Jocelyn: And looking ahead, they’ve pointed toward future work like integrating this system more fully into an integral-field unit or improving the target acquisition with those fold mirrors to really push its capabilities on fainter sources.

Vera: It’s a solid piece of engineering that proves this fiber-polarimetry route is viable and low-cost, which is important because it opens the door for other facilities like the ten meter telescope.

Subrahmanyan: I think the main implication for cosmology is establishing a reliable observational technique to constrain physical parameters in these complex environments, which we can then use to test our models of how those structures evolve over time.

Jocelyn: It’s a good demonstration of how combining different techniques—fiber spectroscopy and polarimetry—can yield new information that neither technique could provide on its own. That’s what this paper is really about.

More episodes

← Home