Benchmarking Stochastic Interpolants for Modeling Physical Systems
summary
The gist
Generative models need to balance deterministic accuracy, spectral consistency, and probabilistic calibration and stochastic interpolants can potentially fulfill these requirements by adjusting their…
In short
Stochastic interpolants are generative models that can map samples between two different distributions, like a current state and a future state. They use an interpolation formula involving deterministic paths and stochastic noise to achieve this mapping. The paper benchmarks these models on physical systems like weather forecasting, showing they can perform well by adjusting how they sample.
Key concepts
- Stochastic Interpolants
- These are generative models defined as a process $x_t$ that smoothly connects two different distributions ($ ho_0$ and $ ho_1$). They use an interpolation formula $x_t = I(t, x_0, x_1) + ext{noise}$ to map samples from the source distribution to the target distribution exactly in finite time.
- Training Frameworks
- The model learns a drift function $b_ heta$ using an empirical loss. This learned drift is crucial for inference because it allows for efficient integration of samples using probability flow ODEs or SDEs, which are mathematical tools used to evolve the state from the source distribution to the target distribution.
- Performance Trade-offs
- When modeling physical systems, like Rayleigh-Benard Convection, there is often a trade-off. Lower errors in specific points might come at the expense of higher spectral errors (errors across different frequencies). Stochastic interpolants show this balance depending on the application.
- Latent vs. Pixel Space Models
- Ablation studies suggest that models operating in latent space tend to be more stable and perform better than those operating directly in pixel space, which is where the input data resides. This implies that representing data in a compressed, lower-dimensional latent space can lead to more reliable generative results.
Terminology used across episodes
This episode discusses
- Benchmarking Stochastic Interpolants for Modeling Physical Systems · Paper Radio
- Conditional diffusion models for downscaling and bias correction of Earth system model precipitation
- Building Normalizing Flows with Stochastic Interpolants
- Appa: Bending Weather Dynamics with Latent Diffusion Models for Global Data Assimilation
- Rectified Flows for Fast Multiscale Fluid Flow Modeling
- Physics-Informed Diffusion Models
- Pangu-Weather: A 3D High-Resolution Model for Fast and Accurate Global Weather Forecast
- A Practical Guide to Sample-based Statistical Distances for Evaluating Generative Models in Science
- Unpaired Downscaling of Fluid Flows with Diffusion Bridges
- Spherical Fourier Neural Operators: Learning Stable Dynamics on the Sphere
- Climate in a Bottle: Towards a Generative Foundation Model for the Kilometer-Scale Global Atmosphere
- Probabilistic Emulation of a Global Climate Model with Spherical DYffusion
- Challenges of learning multi-scale dynamics with AI weather models: Implications for stability and one solution
- Deep Compression Autoencoder for Efficient High-Resolution Diffusion Models
- Probabilistic Forecasting with Stochastic Interpolants and F"ollmer Processes
- ArchesWeather & ArchesWeatherGen: a deterministic and generative model for efficient ML weather forecasting
- CoNFiLD: Conditional Neural Field Latent Diffusion Model Generating Spatiotemporal Turbulence
- PreDiff: Precipitation Nowcasting with Latent Diffusion Models
- CasCast: Skillful High-resolution Precipitation Nowcasting via Cascaded Modelling
- GANs Trained by a Two Time-Scale Update Rule Converge to a Local Nash Equilibrium
- Denoising Diffusion Probabilistic Models
The paper
Benchmarking Stochastic Interpolants for Modeling Physical Systems · Read on arXiv
Anthony Zhou, Amir Barati Farimani, Alexander Wikner, Pedram Hassanzadeh, Amaury Lancelin
Carnegie Mellon University · University of Chicago · LMD/IPSL, CNRS, ENS, Universite PSL é Ecole Polytechnique, Institut Polytechnique de Paris, Reseau de Transport d’ Electricité (RTE)
Generative models have recently emerged as powerful surrogates for physical systems, demonstrating increased accuracy, stability, and/or statistical fidelity. However, most approaches rely on iteratively denoising a Gaussian, a choice that may not be the most effective for autoregressive prediction tasks, where the current and future states are often closely related. We therefore benchmark generative models based on stochastic interpolants, which can learn maps between arbitrary densities, against standard Gaussian-denoising frameworks across a range of fluid and climate systems. Following prior work, we consider a transport map for dynamical systems that learns an interpolant between a point mass at the current state and a conditional distribution of future states. We find that stochastic interpolants can match or outperform Gaussian-denoising baselines in pointwise accuracy, spectral fidelity, and probabilistic skill. Furthermore, we identify a tradeoff where deterministic sampling can improve pointwise accuracy but smooth predictions, whereas stochastic sampling recovers spectral content and calibration but requires more function evaluations, as well as ensemble averaging to recover pointwise accuracy. As a whole, these results establish stochastic interpolants as a competitive baseline for generative physical emulation, and also indicate that the training loss, sampler, and transport map should be chosen with the physical system and target metric in mind.
Transcript
Introduction to the show: ident: AI Radio. Generated commentary on the latest Artificial Intelligence papers.
Tom: We're looking at the paper: "Benchmarking Stochastic Interpolants for Modeling Physical Systems".
Jane: Here's the gist of the paper. Generative models need to balance deterministic accuracy, spectral consistency, and probabilistic calibration and stochastic interpolants can potentially fulfill these requirements by adjusting their sampling.
Tom: Stochastic Interpolants as a Baseline Stochastic interpolants are defined as a class of generative models that admit arbitrary source and target distributions.
Jane: Given samples x0 from a source distribution ρ0 and samples x1 from a target distribution ρ1, a stochastic interpolant is defined as a stochastic process xt such that xt = I(t, x0, x1) + γ(t)z, t ∈
0, 1: .
Tom: The interpolant I satisfies the boundary conditions I(0, x0, x1) = x0 and I(1, x0, x1) = x1.
Title and authors: Jane: So, to recap what we just heard about "Benchmarking Stochastic Interpolants for Modeling Physical Systems," we’re seeing researchers look at how these new models can be used to map physical states directly instead of relying on simple noise transport. The authors are testing them across several challenging physical problems, including flow and convection, to see if this direct learning approach offers a better path than the standard Gaussian diffusion methods.
Tom: Right. And the core idea they are pushing is that by learning a stochastic process between two states, you can potentially achieve higher quality samples with fewer sampling steps compared to just evolving noise backward or forward through a fixed process. They’re looking at how controlling the amount of added noise influences this efficiency and accuracy, which is pretty important for real-world computation.
Lu: The paper highlights that these methods can map between arbitrary source and target distributions, which means they aren't locked into a specific type of data transformation like just image translation; they can handle different physical mappings. This flexibility is what makes them interesting because it’s not just about one kind of task, but a broader capability.
Meng: Flexibility sounds good in a lab setting, but when I think about running these on real traffic or climate data, the computational cost of training a model that learns this complex drift function might be prohibitive at scale. How much does learning that drift b add to the inference time?
Lalam: The authors do show how you can learn this drift using an empirical loss function, L b, which estimates the time derivative of the stochastic interpolant based on samples taken along the path from source to target. This loss helps train a network that guides the process correctly during inference, allowing you to integrate samples using probability flow ODEs or SDEs like dXODE t = b(t, Xt)dt (four) <ref:2509.26282#pg3>.
The paper's summary: Jane: So, we’ve covered the setup. The main summary of this paper is that stochastic interpolants offer a way to directly learn a path between two physical states without relying solely on the standard Gaussian transport method. They introduce this interpolation x t = I(t, x zero x one) + gamma(t)z, where I connects the source and target distributions exactly at time one <ref:2509.26282#pg3>.
Tom: The key takeaway for me is that they found these interpolants can achieve lower variance mean square error when applied to specific problems. For instance, on Kolmogorov Flow, which deals with turbulent fluid dynamics, they achieved the lowest variance mean square error among all tested methods. That's a solid number behind it.
Lu: And they also looked at Rayleigh-Benard Convection and found a trade-off there; lower pointwise error often comes with higher spectral error, meaning you might get good results locally but lose the overall structure when you look at the whole system across different scales. That’s a crucial caveat to keep in mind.
Meng: A trade-off is always an issue when we move from theory to application, right? If the spectral error gets too big, does that mean the model isn't useful for long-term predictions where global consistency matters?
Lalam: They also looked at weather forecasting and found that these stochastic interpolants tend to perform well on medium-range forecasts, specifically up to ten days. This suggests their ability to handle longer temporal dependencies is stronger than what standard methods might offer in those scenarios.
The paper's improvements: Tom: The paper suggests a few key ways we can improve this approach. One big thing they point out is that pixel space models, which are based on the image directly, tend to have higher errors compared to latent space models, so sticking with latent space representations might be more stable overall.
Jane: That makes sense from a stability standpoint. And another improvement they highlight is that the effect of compression ratio on rollout error isn't as bad as some people thought; even with aggressive compression, it doesn't kill the performance much for generative models using this framework.
Lu: They also showed that when you look at how we sample these interpolants, ODE-based samplers actually require fewer steps to get good results compared to other methods. That’s a practical improvement because fewer steps mean faster inference times, which is something engineers always want.
Meng: Fewer sampling steps are definitely good for deployment speed. But what about the training side? If we have to learn that drift function b using that empirical loss L b, does that make the training process itself computationally expensive or unstable?
Lalam: The paper notes a practical issue with the loss function itself; it can have high variance around the endpoints, specifically at time zero and time one, if the noise coefficient gamma dot(t) becomes singular. That means numerical errors can affect how accurately we learn that drift estimate during training.
Conclusion: Jane: So, wrapping up this look at "Benchmarking Stochastic Interpolants for Modeling Physical Systems," the paper shows that these interpolants are a viable alternative to pure noise transport for physical systems because they can adapt their sampling to achieve better accuracy across different physical tasks. They’re showing promise in areas like Kolmogorov flow and medium-range weather forecasts.
Tom: The main implication is that we can use these models not just for pretty pictures, but as more accurate surrogates for complex dynamics, provided we manage the trade-off between pointwise error and spectral consistency carefully across different physical systems.
Lu: For me, it’s about the representation learning aspect; if latent space models prove to be more stable than pixel space ones, that opens up a lot of doors for modeling things where global structure matters. We need to keep exploring how these learned stochastic processes can generalize beyond the specific datasets they were trained on.
Meng: From an engineering standpoint, we’d want to see clearer benchmarks on real-world traffic data or climate models that actually run continuously, because relying only on idealized datasets doesn't tell us what breaks when it hits production scale.
Lalam: And from a production perspective, the paper confirms that optimizing the sampler is key; using ODE samplers instead of other methods allows us to get good performance with fewer steps, which translates directly into faster inference times for deploying these models.
More episodes
- 2603.28595-Optimistic Actor-Critic with Parametric Policies for Linear Markov Decision Processes
- 2603.29765-Training-Free Dynamic Upcycling of Expert Language Models
- 2605.00778-Observable Performance Does Not Fully Reflect Adaptive System Organization: A Multi-Level Analysis of Gait Dynamics Under Occlusal Constraint
- 2605.06906-TraXion: Rethinking Pre-training Frameworks for Mobility and Beyond
- 2605.09165-Sparse Layers are Critical to Scaling Looped Language Models
- 2605.09439-Inverse Design for Conditional Distribution Matching
- 2605.10313-Signature Approach for Contextual Bandits with Nonlinear and Path-dependent Rewards: Regret Bound and Statistical Inference
- 2605.10878-Minimum Neural Weight Norm = Kolmogorov Complexity
- 2605.11617-MIST: Reliable Streaming Decision Trees for Online Class-Incremental Learning via McDiarmid Bound
- 2605.15085-From Data to Action: Accelerating Refinery Optimization with AI